TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'adf419ebbe43c07ab1b7e564d8ee4dc814f012c2539115eeaeeed48bc392bcf6' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'adf419ebbe43c07ab1b7e564d8ee4dc814f012c2539115eeaeeed48bc392bcf6' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
N° 139-508 DATE: September 12, 2017 REV. : /-March 3, 2017 Page 1 of 13 TITLE ATA 62 – MAIN ROTOR BLADE TIP CAP INSPECTION
REVISION LOG New Issue Leonardo S.p.A.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
EMERGENCY ALERT
SERVICE BULLETIN
S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 Page 2 of 13 REVISION: /
1. PLANNING INFORMATION A. EFFECTIVITY AW139 helicopters equipped with Main Rotor Blade (MRB) P/N 3G6210A00131 having S/N listed in Table 1.
NOTE This Service Bulletin is not applicable to MRB having a S/N with the letter “R” as the final digit.
S/N 3615 3634 3667 3729 TABLE 1 NOTE If any of the above MRB is in stock, please contact cse.aw139.aw@leonardocompany.com to obtain information on how to handle the parts.
B. COMPLIANCE Part I Within five (5) flight hours since the date of issuance of this Service Bulletin.
Part II Before the first flight after accomplishment of Part I, in case debonding is found complying with Part I.
Within ten ( 10) flight hours since the date of issuance of this Service Bulletin, in case no debonding is found complying with Part I.
C. CONCURRENT REQUIREMENTS N.A.
D. REASON This Service Bulletin is issued in order to provide the necessary instruction to perform the inspection of the tip cap installed on a defined batch of main rotor blades
S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 REVISION: / Page 3 of 13 P/N 3G6210A00131, in order to detect potential debonding , and the replacement of the affected component as terminating action.
E. DESCRIPTION A case of debonding of the tip cap P/N 3G6210A05331 from the MRB P/N 3G6210A00131 has been reported on an AW139 helicopter, this resulting in the loss of the tip cap in flight. This event did not compromise the conduct of flight.
The investigation has identified as cause of the occurrence the incorrect bonding procedures during the manufacturing of some main rotor blades.
Leonardo Helicopters, as precautionary measure, issued this Service Bulletin to perform a tapping test (Part I) in order to detect potential debonding and to perform the replacement of the MRB (Part II).
F. APPROVAL The content of this Service Bulletin is approved under the authority of DOA nr.
EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.
EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.
If a helicopter listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.
G. MANPOWER To comply with this Service Bulletin the following MMH are deemed necessary:
Part I: approximately one (1) MMH;
Part II: approximately four (4) MMH.
MMH are based on hands-on time and can change with personnel and facilities available.
H. WEIGHT AND BALANCE N.A.
S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 Page 4 of 13 REVISION: / I. REFERENCES
1) PUBLICATIONS
DATA MODULE DESCRIPTION DM01 39-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance.
DM02 39-A-62-11-01-00A-520A-A Main rotor blade - Remove procedures DM03 39-A-62-11-01-00A-720A-A Main rotor blade - Install procedures DM04 39-A-GF-05-00-00A-066A-A Hammer (steel) M/R and T/R blades tapping insp. (GF-05-00) DM05 39-A-GF-06-00-00A-066A-A Hammer (alum) M/R and T/R blades tapping insp. (GF-06-00)
2) ACRONYMS AMP Aircraft Maintenance Publication DOA Design Organization Approval DM Data Module EASA European Aviation Safety Agency ITEP Illustrated Tools and Equipment Publication LHD Leonardo Helicopter Division LS Local Supply MMH Maintenance-Man-Hours MMIR Maintenance Malfunction Information Report MRB Main Rotor Blade WRM Warranty Reply Memo
3) ANNEX Annex A Hammer Tapping Inspection - AW139 Tip-Cap J. PUBLICATIONS AFFECTED N.A.
K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.
S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 REVISION: / Page 5 of 13
2. MATERIAL INFORMATION A. REQUIRED MATERIALS
1) PARTS
PART II P/N DESCRIPTION Q.TY NOTE 3G6210A00131 MRB AR
2) CONSUMABLES The following consumable materials, or equivalent, are necessary to accomplish this Service Bulletin:
Spec./AW code number DESCRIPTION Q.TY NOTE PART Commercial Lint-free cloth (C011) AR LS I MIL-PRF-680C, Type II Cleaning solvent (C010) AR LS I MIL-C-25769H Cleaning compound (C018) AR LS I B. SPECIAL TOOLS P/N DESCRIPTION Q.TY NOTE PART 109-3101-58-1 or 109-3101-58-2 or equivalent Tapping hammer (GF-05-00) or (GF-06-00) 1 I / Magnifying glass (10 power) 1 LS I C. INDUSTRY SUPPORT INFORMATION WARRANTY: Owners/Operators who comply with the instructions of this Service Bulletin no later than the applicable date in the “Compliance” section will be eligible to receive REQUIRED MATERIALS on free of charge basis, except for Consumable Materials and Special Tools.
NOTE: Customers who fail to comply with the instructions in this Service Bulletin before the compliance date are not eligible for the aforementioned special policy.
Please Issue relevant MMIR form to your Warranty Administration Dpt.
NOTE: WRM will include RETURN MATERIAL AUTHORIZATION (RMA) number; the unit disembarked (P/N 3G6210A00131 MRB) from the aircraft has to be returned to LHD within thirty (30) calendar days after the shipment of the replacement part. In case of missing return within thirty (30) calendar days, Customer will be invoiced for the price of the replacement part.
S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 Page 6 of 13 REVISION: / NOTE: The S/N and INSPECTION REPORT are mandatory; in case the MMIR is not accompanied by these documents, it will be rejected.
S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 REVISION: / Page 7 of 13
3. ACCOMPLISHMENT INSTRUCTIONS PART I
1. In accordance with AMP DM 39-A- 00-20-00-00A-120A-A, prepare the helicopter on ground for a safe maintenance. Disconnect the battery , all electrical power sources and/or the external power supply.
2. Gain access to the affected MRB P/N 3G6210A00131.
NOTE The authorized personnel who will carry out the test must comply with the requirements listed in Annex A.
3. In accordance with Annex A and with reference to Figure 1, perform a tapping test on the identified area of MRB.
4. In case no debonding is found, proceed with step 6.
5. In case debonding is found, apply Part II of this Service Bulletin to replace the affected MRB before next flight. Send the MRB you have removed to LHD for tip cap replacement and MRB assembly S/N remarking with letter “R” after last digit.
6. Return the helicopter to flight configuration and record for compliance with Part I of this Service Bulletin on the helicopter logbook and on the component logcard.
7. Send the attached compliance form to the following mail box:
cse.aw139.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 Page 8 of 13 REVISION: /
PART II
1. In accordance with AMP DM 39-A- 00-20-00-00A-120A-A, prepare the helicopter on ground for a safe maintenance. Disconnect the battery , all electrical power sources and/or the external power supply.
2. In accordance with AMP DM 39-A- 62-11-01-00A-520A-A and DM 39-A- 62-11-01-00A- 720A-A, replace the affected MRB P/N 3G6210A00131 with a serviceable one not affected by this Service Bulletin. Send the MRB you have removed to LHD for tip cap replacement and MRB assembly S/N remarking with letter “R” after last digit.
3. Return the helicopter to flight configuration and record for compliance with Part II of this Service Bulletin on the helicopter logbook.
4. Send the attached compliance form to the following mail box:
cse.aw139.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
« LEONARDO HELICOPTERS
LEADING EDGE EROSION EROSION
FAIRING HONEYCOMB CORE SHIELD SHIELD
COVER LIGHTNING BONDING STRIP SPAR LEADING EDGE
TRAILING A TIP
TRAILING EDGE FAIRING EDGE TRIM TAB TRIM TAB CAP
VOIDS NOT
PERMITTED IN
THIS AREA COVER STA 6300 STA 6400
HAMMER TAPPING IS REQUIRED
ON BOTH UPPER AND LOWER SIDES
AND NOSE OF THE BLADE Figure 1 S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 REVISION: / Page 9 of 13
Figure 2 S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 Page 10 of 13 REVISION: /
Page intentionally left blank
S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 REVISION: / Page 11 of 13
ANNEX A
HAMMER TAPPING INSPECTION AW139 TIP-CAP
ANNEX A S.B. N°139-508 EMERGENCY ALERT DATE: September 12, 2017 Page 12 of 13 REVISION: /
SPECIFIC REQUIREMENTS OF INSPECTION Carry out hammer tapping inspection with hammer P/N 109-3101-58-1 or P/N 109-3101- 58-2 of both upper and lower sides and nose of the blade to detect potential debonding.
Report results.
GENERAL REQUIREMENTS
1. PERSONNEL AUTHORIZATION REQUIREMENTS In order to be authorized to carry out hammer tapping inspections, the assigned personnel shall:
have passed the near vision examination and colour perception requirements specified in EN4179 / NAS410;
have passed an audiometric test which consists of a test at 500, 1000, 2000 and 3000 Hz frequencies with the following acceptance criteria:
a. average maximum loss of 30 dB at the four frequencies;
b. maximum loss of 50 dB at every single frequency;
NOTE The above requirements shall be considered as a minimum; other tests and requirements based on local national health and safety protection rules are acceptable on condition that the above requirements are satisfied or exceeded.
have a minimum of 40 hours of documented practical experience obtained under the direct supervision of personnel having previous authorization in hammer tapping inspection;
have knowledge of the type of structure to be tested in order to be aware of the change of sound due to the configuration/lay-up of the part, such as, but not limited to:
- different thickness of the top layers,
- overlap areas,
- inserts,
- changes to the geometrical form of the part,
- edge effects,
- changes to the distance between supports and fasteners,
- changes to the thickness of adhesive,
- areas with sealant,