Copy · Leonardo Helicopters ASB No. 139-569 Rev A · 14 pages

© Leonardo S.p.A. Filed by the FAA in regulations.gov docket FAA-2021-0507, the docket of AD 2021-18-11. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'df2cb1dd9b9262fe721d1a1647fbba39a171ffba4e67c94a0a389703e73cde24'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

N° 139-569 DA TE: December 28, 2018 REV. : A - February 27, 2019 Pa ge 1 of 13 TITLE ATA 64 – TAIL ROTOR SLIDER ASSY DETAILED INSPECTION

REVISION LOG The Revision A of this Service Bulletin supersedes the first issue dated December 28, 2

018.

Revision A is issued in order to update the accomplishment instructions and the related figures.

Helicopters that have complied with Part II of the first issue of this Service Bulletin do not need any additional action.

Helicopters that have complied with Part I of the first issue of this Service Bulletin and

• have recorded corrosion, should reconsider the evidences recorded in accordance with Part I of current Revision A;

• have found only refinishing signs without corrosion, have to keep the next scheduled inspection as already stated performing the first issue;

• have not recorded corrosion, do not need any additional action.

An appropriate entry should be made in the aircraft log book upon accomplishment.

If ownership of aircraft has changed, please, forward to new owner.

Leonardo S.p.A.

Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 ALERT

SERVICE BULLETIN

S.B. N°139-569 ALERT DATE: December 28, 2018 Page 2 of 13 REVISION: A - February 27, 2019

1. PLANNING INFORMATION A. EFFECTIVITY All AB139/AW139 helicopters.

B. COMPLIANCE PART I

• Within fifty (50) FH if the slider assy has already logged more than twenty-four-hundred (2400) FH at the issue date of this Service Bulletin.

• Before exceeding twenty-four-hundred-and-fifty (2450) FH if the slider assy has NOT logged more than twenty-four-hundred (2400) FH at the issue date of this Service Bulletin.

• Every one (1) year after first accomplishment of Part I, only if during the inspection signs of refinishing are found.

PART II Immediately after compliance with Part I, if evidence of corrosion is found during the inspection.

C. CONCURRENT REQUIREMENTS N.A.

D. REASON This Service Bulletin is issued in order to require the inspection of the slider assembly on the tail rotor.

E. DESCRIPTION Following a reported occurrence of Tail Rotor Slider found cracked on an AW139 helicopter after landing, this Service Bulletin requires a detailed inspection of the slider assembly P/N 3G6430A00131 for corrosion and mechanical damage and, depending on findings, the replacement of the part.

In particular, the investigation on the cracked slider highlighted presence of corrosion craters on its surface, originated along finishing signs compatible with low grit sanding operations, possibly generated from a maintenance activity not allowed in service.

This condition, if not detected and corrected, could lead to the breakage of the slider.

S.B. N°139-569 ALERT DATE: December 28, 2018 REVISION: A - February 27, 2019 Page 3 of 13 F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.

EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.

If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.

G. MANPOWER To comply with this Service Bulletin the following MMH are deemed necessary:

Part I: approximately one (1) MMH.

Part II:

• approximately four (4) MMH, if tool kit P/N 3G6405G04032 is NOT available at Customer’s facilities.

• approximately ten (10) MMH, if tool kit P/N 3G6405G04032 is available at Customer’s facilities.

MMH are based on hands-on time and can change with personnel and facilities available.

H. WEIGHT AND BALANCE N.A.

I. REFERENCES

1) PUBLICATIONS

DATA MODULE DESCRIPTION PART DM01 39-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance.

I DM02 39-A-64-31-04-00A-520A-A Sliding control assembly - Remove procedure I, II DM03 39-A-64-31-04-00A-720A-A Sliding control assembly - Install procedure I, II

S.B. N°139-569 ALERT DATE: December 28, 2018 Page 4 of 13 REVISION: A - February 27, 2019

DATA MODULE DESCRIPTION PART DM04 39-A-64-31-04-02A-530A-B Spider and slider assembly (sliding control assembly) - Disassemble procedure I DM05 39-A-64-31-04-02A-710A-B Spider and slider assembly (sliding control assembly) - Assemble procedure I DM06 39-A-64-31-04-01A-921A-B Duplex bearing (sliding control assembly) - Replacement (remove and install a new item) I, II DM07 CSRP-A-51-21-08-00A-649A-D Passivation of CRES - Other process to change the surface finish of material I

2) ACRONYMS AMDI Aircraft Material Data Information AMP Aircraft Maintenance Publication DM Data Module DOA Design Organization Approval EASA European Aviation Safety Agency FH Flight Hours ITEP Illustrated Tools and Equipment Publication LHD Leonardo Helicopter Division MMH Maintenance Man Hours MMIR Maintenance Malfunction Information Report SB Service Bulletin TR Tail Rotor WRM Warranty Reply Memo

3) ANNEX N.A.

J. PUBLICATIONS AFFECTED AW139 AMP K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.

S.B. N°139-569 ALERT DATE: December 28, 2018 REVISION: A - February 27, 2019 Page 5 of 13

2. MATERIAL INFORMATION A. REQUIRED MATERIALS

1) PARTS PART I N.A.

PART II # P/N ALTERNATIVE P/N DESCRIPTION Q.TY LVL NOTE LOG P/N 1 3G6430A02531 3G6430A01931 Sliding control assy 1 . (1) -

2) CONSUMABLES The following consumable materials, or equivalent, are necessary to accomplish this Service Bulletin:

# Spec./LHD code number DESCRIPTION Q.TY NOTE PART 2 Commercial Gloves AR (2) I, II 3 MS20995C32 Lockwire AR (2) (3) I, II 4 A629A02UV or AW001CK02UV Strap tiedown AR (2) (3) I, II 5 CCC-C-440, Class I Cheesecloth (C028) AR (2) I 6 TT-N-95, Type II Aliphatic naphtha (C059) AR (2) I 7 Commercial 3M Scotch Brite (C015), abrasive pad with grade 7447 or finer AR (2) I 8 UU-T-106 Masking tape (C064) AR (2) I 9 AWPS008T PPG Aerospace Semco® Pasa Jell 101 (C905) AR (2) I

Refer also to AMDI for the consumable materials required to comply with the AMP DM referenced in the accomplishment instructions.

3) LOGISTIC MATRIX N.A.

NOTE

(1) Spider and slider assy P/N 3G6430A01931 is a valid alternative to sliding control assy P/N 3G6430A02531, only if tool kit P/N 3G6405G04032 is already available at Customer’s facilities.

(2) Item to be procured as local supply.

(3) To be procured if already installed on TR boot.

S.B. N°139-569 ALERT DATE: December 28, 2018 Page 6 of 13 REVISION: A - February 27, 2019 B. SPECIAL TOOLS The following special tools, or equivalent, are necessary to accomplish this Service Bulletin:

# P/N DESCRIPTION Q.TY NOTE PART 10 Commercial Magnifying glass (10 power) 1 (B1) I 11 Commercial Light source (fluorescent) / Flashlight 1 (B1) I 12 RMGE-DS-06-2010-RH Deck servicing platform, RH 1 (B1) I, II Refer also to ITEP for the special tools required to comply with the AMP DM referenced in the accomplishment instructions.

SPECIAL TOOLS NOTE Item to be procured a local supply. (B1) C. INDUSTRY SUPPORT INFORMATION WARRANTY: Owners/Operators who comply with the instructions of this Service Bulletin no later than the applicable date in the “Compliance” section will be eligible to receive necessary replacements on free of charge basis, except for Consumable Materials and Special Tools.

NOTE: Customers who fail to comply with the instructions in this Service Bulletin before the compliance date are not eligible for the aforementioned special policy.

Please Issue relevant MMIR form to your Warranty Administration Dpt.

NOTE: WRM will include RETURN MATERIAL AUTHORIZATION (RMA) number; the unit disembarked from the aircraft has to be returned to LHD within thirty (30) calendar days after the shipment of the replacement part. In case of missing return within thirty

(30) calendar days, Customer will be invoiced for the price of the replacement part.

S.B. N°139-569 ALERT DATE: December 28, 2018 REVISION: A - February 27, 2019 Page 7 of 13

3. ACCOMPLISHMENT INSTRUCTIONS

GENERAL NOTES Place an identification tag on all components that are re-usable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later re-use.

PART I

1. In accordance with AMP DM 39-A-00-20-00-00A-120A-A, prepare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.

2. Put the Platform (GG-02-00), or an approved alternative, adjacent to the right side of the fuselage.

NOTE During the accomplishment of the following steps, the removal of the slider assy from the tail rotor is not required, unless specified.

3. With reference to Figure 1, get access to the TR, remove the installed tiedown strap or lockwire and move the boot to expose the area shown in Figure 2 Detail C.

WARNING BEFORE APPLYING STEP 4, KEEP IN MIND THAT THE ALIPHATIC NAPHTHA (C059) IS A DANGEROUS MATERIAL. BEFORE YOU DO THIS

PROCEDURE, MAKE SURE THAT YOU KNOW ALL

THE SAFETY PRECAUTIONS AND FIRST AID INSTRUCTIONS FOR THE ALIPHATIC NAPHTHA.

4. Clean the base of the slider stem with a clean ch eesecloth (C028) and the aliphatic naphtha (C059).

NOTE When you examine the slider assy, use the magnifying glass (10 power) and, where necessary, the flashlight.

S.B. N°139-569 ALERT DATE: December 28, 2018 Page 8 of 13 REVISION: A - February 27, 2019 NOTE During the accomplishment of the following steps, in case of doubt contact the Product Support Engineering (cse.aw139.aw@leonardocompany.com).

NOTE During the accomplishment of the following steps, limit the inspection for corrosion only to the area delimited within the Figure 2 Detail C.

NOTE Figure 2 and Figure 3 Details A and B show evidence of corrosion damage and signs of surface imperfections from refinishing with improper abrasives.

5. With reference to Figures 2 and 3, identify on th e slider stem the area enclosed within the Detail C and compare its finishing with the one shown in Details A and B.

CAUTION During polish operation on the area to be examined with the Scotch Brite (C015), make sure that you follow the subsequent precautions:

• The Scotch Brite must be used only in the axial direction;

• The Scotch Brite must be used only with your hands.

6. If you find suspected evidences of corrosion sign s as per Figures 2 and 3, perform following step 7, otherwise go to step 9.

7. Check the suspected evidences of corrosion signs as described in the following procedure:

7.1 In accordance with AMP DM 39-A-64-31-04-00A-520A-A, remove the sliding control assembly from the helicopter.

7.2 Polish gently the related area with a very light Scotch Brite (C015).

7.3 After polishing, examine the slider:

7.3.1 If the signs of corrosion are confirmed as per Figure 3, go to Part II to replace the slider assembly with a serviceable part.

7.3.2 If, after polishing, the suspected signs of corrosion are no longer evident, perform following step 8 to restore the surface finish.

8. Restore the surface finish of the slider material as described in the following procedure:

8.1 In accordance with AMP DM 39-A-64-31-04-02A-530A-B, remove the spider from

S.B. N°139-569 ALERT DATE: December 28, 2018 REVISION: A - February 27, 2019 Page 9 of 13 the slider.

CAUTION Apply the masking tape (C064) around the area where the cleaning solution must be applied.

During passivation activity pay particular attention not to let the cleaning solution flow out from the masking tape boundaries to the outer surface.

8.2 In accordance with the repair publication CSRP-A -51-21-08-00A-649A-D, apply the Cleaning solution (C905) on the surface of slider assy.

8.3 In accordance with AMP DM 39-A-64-31-04-02A-710A-B, assemble the spider and the slider components.

8.4 In accordance with AMP DM 39-A-64-31-04-00A-720A-A, reinstall the siliding control assembly on the helicopter.

9. If evidences of corrosion are not found and evidences of refinishing signs are found, update the maintenance schedule to plan the next inspection according to paragraph “COMPLIANCE” (Part I).

10. If no corrosion and no refinishing signs are found, no further action is required.

11. With reference to Figure 1, move the boot in the right position on the slider assy and install the tiedown strap or lockwire.

12. Remove the platform from the right side of the fuselage.

13. Return the helicopter to flight configuration and record for compliance with Part I of this Service Bulletin on the helicopter logbook.

14. Send the attached compliance form to the following mail box:

cse.aw139.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.

S.B. N°139-569 ALERT DATE: December 28, 2018 Page 10 of 13 REVISION: A - February 27, 2019

PART II NOTE Perform the following step 1, if tool kit P/N 3G6405G04032 is NOT available at Customer’s facilities.

1. Send the sliding control assy P/N 3G6430A02531 r emoved performing Part I to LHD.

NOTE Perform the following steps 2 thru 4, only if tool kit P/N 3G6405G04032 is available at Customer’s facilities.

2. In accordance with AMP DM 39-A-64-31-04-01A-921A- B, perform the applicable steps to remove the duplex bearing from the sliding control assembly and keep it for later re-use.

3. Send the spider and slider assy P/N 3G6430A01931 removed in previous step 2 to LHD.

NOTE A serviceable part is a component that is new (never installed on a helicopter); or a component that, before installation, has passed the visual inspection (no defects detected) in accordance with the instructions of Part I of this SB.

4. In accordance with AMP DM 39-A-64-31-04-01A-921A- B, perform the applicable steps to reinstall the duplex bearing on the spider and slider assy.

5. In accordance with AMP DM 39-A-64-31-04-00A-720A-A install a serviceable sliding control assembly on the helicopter.

6. Return the helicopter to flight configuration and record for compliance with Part II of this Service Bulletin on the helicopter logbook.

7. Send the attached compliance form to the following mail box:

cse.aw139.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.

Figure 1 S.B. N°139-569 ALERT DATE: December 28, 2018 REVISION: A - February 27, 2019 Page 11 of 13

TR□BOOT A629A02UV TIEDOWN□STRAP (REF) OR MS20995C32□LOCKWIRE□(REF) RESTORE AFTER□INSPECTION VIEW A TR□SCISSORS□REMOVAL IS□NOT REQUIRED TO□PERFORM THE□INSPECTION

Page 12OCROpen in PDF

* LEONARDO HELICOPTERS DETAIL A (SEE FIGURE 3)

DETAIL C DETAIL B (SEE FIGURE 3) Corroded area of the Slider stem near the fracture surface. The corrosion craters tend to originate along finishing signs compatible with sanding operations. It is to be noted the high distribution of quite circumferential signs and the low distribution of craters visible on the thin edge of the fracture surface.

Figure 2 S.B. N°139-569 ALERT DATE: December 28, 2018 Page 12 of 13 REVISION: A - February 27, 2019

Pages 13–14 of 14