TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'ec1428a56e241d8f4c77fa1476fde25c95ff770db1420016ff9782cbc1c3854b' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'ec1428a56e241d8f4c77fa1476fde25c95ff770db1420016ff9782cbc1c3854b' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
N° 169-032 DA TE: July 12, 2017 REV. : A - September 8, 2017 Pa ge 1 of 11 TITLE ATA 56 - COCKPIT DOORS AND CABIN EMERGENCY EXIT WINDOWS I NSTALLATION.
REVISION LOG Application of the initial issue (Rev. /) of this Service Bulletin is considered satisfactory to r estore the airworthiness of the helicopter.
Revision A is issued to:
• Update paragraph 1.E
• Update paragraph 2.A
• Update paragraph 3 Revision bars in the margin identify changes.
An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
Leonardo S.p.A.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 ALERT
SERVICE BULLETIN
S.B. N°169-032 DATE: July 12, 2017 Page 2 of 11 REVISION: A - September 8, 2017
1. PLANNING INFORMATION A. EFFECTIVITY AW169 helicopters S/Ns 69007, 69009, 69011, 69012, 69013, 69014, 69015, 69016, 69017, 69018, 69019, 69021, 69022, 69023, 69024, 69027, 69032, 69033, 69041, 69045 and 69051.
B. COMPLIANCE Within 70 flight hours or 6 months whichever occurs first from receipt of this Service Bulletin.
C. CONCURRENT REQUIREMENTS N.A.
D. REASON This Service Bulletin has been issued in order to provide all the necessary instruction on how to perform the replacement of the seal, the non-metallic channel and the handle of all the cockpit doors and cabin emergency exit windows.
E. DESCRIPTION Leonardo Helicopter Division has developed the dedicated Service Bulletin to replace the seal, the non-metallic channel and the handle of the emergency exit windows before the scheduled discard time, in order to restore the correct installation of the emergency exit system.
Steps 4 and 5 are NOT applicable to those helicopters on which the filler wedges and seals have been replaced (following the discard times DT56-01 and DT56-02 or for any other reasons) at least once since delivery.
F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.
E.A.S.A. states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.
If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the
S.B. N°169-032 DATE: July 12, 2017 REVISION: A - September 8, 2017 Page 3 of 11 Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.
G. MANPOWER To comply with this Service Bulletin twenty-four (24) Maintenance-Man-Hours (MMH) are deemed necessary.
Maintenance-Man-Hours are based on hands-on time and can change with personnel and facilities available H. WEIGHT AND BALANCE N.A.
I. REFERENCES
1) PUBLICATIONS
DATA MODULE DESCRIPTION PART DM01 69-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance.
N.A.
DM02 69-A-56-31-07-00A-921A-A Seals and filler (Cockpit door window installation)-Replacement N.A.
DM03 69-A-56-32-01-05A-921A-A Seals and filler (Passenger door window) - Replacement N.A.
2) ACRONYMS DM Data Module MMH Maintenance-Man-Hours LH Left hand RH Right hand FWD Forward AFT After
3) ANNEX N.A.
J. PUBLICATIONS AFFECTED N.A.
K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.
S.B. N°169-032 DATE: July 12, 2017 Page 4 of 11 REVISION: A - September 8, 2017
2. MATERIAL INFORMATION A. REQUIRED MATERIALS
1) PARTS P/N DESCRIPTION Q.TY NOTE A417AF001WB2670 Nonmetallic channel LH/RH cockpit door REF (1) A417AG002WB2670 Seal LH/RH cockpit door REF (2) A417AF001WB2461 Nonmetallic channel LH/RH FWD passenger door REF (1) A417AG002WB2461 Seal LH/RH FWD passenger door REF (2) A417AF001WB2402 Nonmetallic channel LH/RH AFT passenger door REF (1) A417AG002WB2402 Seal LH/RH AFT passenger door REF (2) 8G9500L00151 Internal emergency exit handle 6 (3) 8G9500L00251 External emergency exit handle 6 (4) A180A022E21 Decal 6 (5)(6) AW003DE005E33B Decal 6 (5)(7)
2) CONSUMABLES Spec./AW code number DESCRIPTION Q.TY NOTE PART A417AF001WB Filler wedge 35 m (8) N.A.
A417AG002WB Seal 20 m (9) N.A.
P-D 680 Type II Code No.
505405407 Cleaning solvent Ardrox 5503 (C010) AR Local Supply N.A.
TT-I-735 Code No.
531050445 Isopropyl alcohol (C039) AR Local Supply N.A.
MIL-T-23142 Code No.
900001393 Adhesive tape (C050) AR Local Supply N.A.
MIL-B-131 Barrier material (C051) AR Local Supply N.A.
A-A-3097 Class 2 Code No.
999999999000001120 Adhesive Cyanoacrylate (C122) AR Local Supply N.A.
199-05-152, Type I, Class 2, Code No. 900002980 Adhesive RTV 732 (C126) AR Local Supply N.A.
Commercial Rapid polish (C216) AR Local Supply N.A.
S.B. N°169-032 DATE: July 12, 2017 REVISION: A - September 8, 2017 Page 5 of 11 Spec./AW code number DESCRIPTION Q.TY NOTE PART MIL-T-11291 Code No.
501664822 Tape 425 (C258) AR Local Supply N.A.
FHD Code No. 900002310 PTFE release agent (C415) AR Local Supply N.A.
Code No. MD100075 Teflon adhesive tape (C416) AR Local Supply N.A.
NOTE
(1) These items will not be supplied. Rework the raw filler wedge supplied to obtain the P/N listed in the “required materials” table. The final numbers in the P/N is the final length in mm.
(2) These items will not be supplied. Rework the raw seal supplied to obtain the P/N listed in the “required materials” table. The final numbers in the P/N is the final length in mm.
(3) Q.ty 4 emergency handles P/N 8G9500L00151 shall be provided if the helicopter is equipped with sliding passenger window kit P/N 6F5630F00411.
(4) Q.ty 4 emergency handles P/N 8G9500L00251 shall be provided if the helicopter is equipped with sliding passenger window kit P/N 6F5630F00411.
(5) For aircraft registered in non-EASA member states, local bilingual interior and exterior markings shall be adopted, if applicable, in compliance with the competent National Aviation Authority approved configuration.
(6) Q.ty 4 decals P/N A180A022E21 shall be provided if the helicopter is equipped with sliding passenger window kit P/N 6F5630F00411.
(7) Q.ty 4 decals P/N AW003DE005E33B shall be provided if the helicopter is equipped with sliding passenger window kit P/N 6F5630F00411.
(8) Raw material to be reworked to obtain the required filler wedges as specified in the “compliance instructions” section.
(9) Raw material to be reworked to obtain the required seals as specified in the “compliance instructions” section.
B. SPECIAL TOOLS P/N DESCRIPTION Q.TY NOTE PART 3G5605G00132 Windows installation kit (GF-34-00) 1 N.A.
C. INDUSTRY SUPPORT INFORMATION Owners/Operators who comply with the instructions of this Bulletin, no later than the applicable date in the “Compliance section” will be eligible to receive REQUIRED
S.B. N°169-032 DATE: July 12, 2017 Page 6 of 11 REVISION: A - September 8, 2017 MATERIALS on free of charge basis, except for Consumable Materials and Special Tools.
NOTE: Customers who fail to comply with the instructions in this bulletin before the compliance date are not eligible for the aforementioned special policy.
Please Issue relevant M.M.I.R. form ( (M)aintenance (M)alfunction (I)nformation (R)eport ) to your Warranty Administration Dpt.
S.B. N°169-032 DATE: July 12, 2017 REVISION: A - September 8, 2017 Page 7 of 11
3. ACCOMPLISHMENT INSTRUCTIONS
GENERAL NOTES
a) Place an identification tag on all components that are re-usable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later re-use.
b) Let adhesive cure at room temperature for at least 24 hours unless otherwise specified.
c) All lengths are in mm.
1. In accordance with AMP DM 69-A-00-20-00-00A-120A- A, prepare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.
NOTE Perform step 2 only if the helicopter is NOT equipped with decals P/N A180A022E21 “1 PULL TAB TO REMOVE CORD 2 PUSH OUT WINDOW” in the internal side of the cockpit and cabin windows, otherwise skip to step 3.
2. With reference to Figure 1 and Figure 2, remove t he n°6 already installed decals from the RH and LH passenger and cockpit doors and replace them with n°6 decals P/N A180A022E21 “1 PULL TAB TO REMOVE CORD 2 PUSH OUT WINDOW”.
NOTE Perform step 3 only if the helicopter is NOT equipped with decals P/N AW003DE005E33B “EMERGENCY EXIT 1. PULL TAB TO REMOVE CORD 2. PUSH IN WINDOW” in the external side of the cockpit and cabin windows, otherwise skip to step 4.
3. With reference to Figure 3, remove the n°6 alread y installed decals from the RH and LH passenger and cockpit doors and replace them with n°6 decals P/N AW003DE005E33B “EMERGENCY EXIT 1. PULL TAB TO REMOVE CORD 2. PUSH IN WINDOW”.
S.B. N°169-032 DATE: July 12, 2017 Page 8 of 11 REVISION: A - September 8, 2017 NOTE Steps 4 and 5 are NOT applicable to those helicopters on which the filler wedges and seals have been replaced (following the discard times DT56-01 and DT56-02 or for any other reasons) at least once since delivery.
NOTE If helicopter is equipped with straps P/N A487A003A, pay attention to replace them with the emergency exit handles P/N 8G9500L00151 for the internal side and P/N 8G9500L00251 for the external side.
CAUTION In the following steps 4 and 5, be careful during windows removal from their frames in order to avoid damages to the windows themselves.
4. In accordance with AMP DM 69-A-56-31-07-00A-921A- A, replace the seals, the non-metallic channels and the emergency handles of the LH and RH cockpit door upper windows.
NOTE Perform step 5 only on the LH and RH forward fixed passenger door windows if the helicopter is equipped with the sliding passenger window kit P/N 6F5630F00411.
5. In accordance with AMP DM 69-A-56-32-01-05A-921A- A, replace the seals, the non-metallic channels and the emergency handles of the LH and RH passenger door windows.
6. Return the helicopter to flight configuration and record for compliance with this Service Bulletin on the helicopter logbook.
7. Send the attached compliance form to the following mail box:
pse_aw169.mbx.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.
• LEONARDO
HELICOPTERS i1 PULL RED STRAP TO REMOVE CORD EWD REMOVE: A180A005E21 DECAL 2 PUSH OUT WINDOW" VIEW B RH SIDE SHOWN LH SIDE OPPOSITE PASSENGER DOOR RH SIDE SHOWN LH SIDE OPPOSITE REMOVE: RED STRAP AND RELEVANT GASKET "2 PUSH OUT WINDOTO REMOVE CORD REMOVE: A180A005E21 DECAL
VIEW A RH SIDE SHOWN LH SIDE OPPOSITE DETAIL C RH SIDE SHOWN LH SIDE OPPOSITE REMOVE: RED STRAP AND RELEVANT GASKET REMOVE: RED STRAP A PULL BED STRAP TO REMOVE CORD CREW DOOR RH SIDE SHOWN LH SIDE OPPOSITE REMOVE: 2 PUSH OUT WINDOW"
VIEW D RH SIDE SHOWN LH SIDE OPPOSITE DETAIL E RH SIDE SHOWN LH SIDE OPPOSITE WAS Figure 1 S.B. N°169-032 DATE: July 12, 2017 REVISION: A - September 8, 2017 Page 9 of 11
K LEONARDO
HELICOPTERS 1 PULL TAB TO REMOVE CORD EWD INSTALL: A180A022E21 DECAL 2 PUSH OUT WINDOW" PASSENGER DOOR
VIEW B RH SIDE SHOWN LH SIDE OPPOSITE RH SIDE SHOWN LE SIDE OPPOSITE INSTALL: 8G9500L00151 INTERNAL EMERGENCY EXIT HANDLE INSTALL: A180A022E21 DECAL "1 PULL TAB TO REMOVE CORD 2 PUSH OUT WINDOW"
VIEW A RH SIDE SHOWN LH SIDE OPPOSITE I PUSH OUT WINGOO PUSH AND TURN - SLIDE DETAIL C RH SIDE SHOWN LH SIDE OPPOSITE INSTALL: 8G9500L00151 INTERNAL EMERGENCY EXIT HANDLE INSTALL: A180A022E21 DECAL "1 PULL TAB TO REMOVE CORD 2 PUSH OUT WINDOW" CREW DOOR RH SIDE SHOWN LH SIDE OPPOSITE INSTALL: 8G9500L00151 INTERNAL EMERGENCY EXIT HANDLE VIEW E RH SIDE SHOWN LH SIDE OPPOSITE DETAIL D RH SIDE SHOWN LE SIDE OPPOSITE BECOMES Figure 2 S.B. N°169-032 DATE: July 12, 2017 Page 10 of 11 REVISION: A - September 8, 2017
Figure 3 S.B. N°169-032 DATE: July 12, 2017 REVISION: A - September 8, 2017 Page 11 of 11 SB169-032-003-01
DETAIL A
LH SIDE SHOWN
RH SIDE OPPOSITE
LH SIDE SHOWN
RH SIDE OPPOSITE
CREW DOOR
DETAIL A REMOVE:
AW003DE001E33B DECAL (REF.)
INSTALL:
AW003DE005E33B DECAL REMOVE:
A487A003A EMERGENCY STRAP (REF.)
INSTALL:
8G9500L00251 EXTERNAL
EMERGENCY EXIT HANDLE
LH SIDE SHOWN
RH SIDE OPPOSITE
PASSENGER DOOR
DETAIL B
DETAIL B TYP 2 PLCS
LH SIDE SHOWN
RH SIDE OPPOSITE REMOVE:
AW003DE001E33B DECAL (REF.)
INSTALL:
AW003DE005E33B DECAL REMOVE:
A487A003A EMERGENCY STRAP (REF.)
INSTALL:
8G9500L00251 EXTERNAL
EMERGENCY EXIT HANDLE
Remarks:
Information:
SERVICE BULLETIN COMPLIANCE FORM Date:
Number:
Revision:
Please send to the following address:
Telephone:
Fax:
B.T. Compliance Date:
Customer Name and Address:
Helicopter Model S/N Total Number Total Hours T.S.O.
LEONARDO S.p.A.
CUSTOMER SUPPORT & SERVICES - ITALY PRODUCT SUPPORT ENGINEERING & LICENSES DEPT.
Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) - ITALY Tel.: +39 0331 225036 Fax: +39 0331 225988 We request your cooperation in filling this form, in order to keep out statistical data relevant to aircraft configuration up-to-date. The form should be filled in all its parts and sent to the above address or you can communicate the application also via Technical Bulletin Application Communication Section placed in Leonardo AW Customer Portal - MyCommunications Area. We thank you beforehand for the information given.