Copy · Leonardo Helicopters ASB 169-082 Rev A · 8 pages

© Leonardo S.p.A. Filed by the FAA in regulations.gov docket FAA-2021-0578, the docket of AD 2021-20-03. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '8142a73f4ce3fe7950b10927a333e2e39adad3f18d36b43b484d56f5500aaab6'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

N° 169-082 DA TE: July 31, 2018 REV. : A - A ugust 3, 2018 Pa ge 1 of 7 TITLE ATA 67 - COLLECTIVE FIXED FLIGHT CONTROL FRICTION CHECK

REVISION LOG Helicopters already compliant with previous issues of this Service Bulletin do not need any a dditional action.

Revision A is issued in order to extend the effectivity also to the helicopters equipped with pilot collective stick assy P/N 6F6711A07831.

Revision bars identify changes.

An appropriate entry should be made in the aircraft log book upon accomplishment.

If ownership of aircraft has changed, please, forward to new owner.

Leonardo S.p.A.

Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy Tel.: +39 0331 229111 - Fax: +39 0331 229605/222595 ALERT

SERVICE BULLETIN

S.B. N°169-082 ALERT DATE: July 31, 2018 Page 2 of 7 REVISION: A - August 3, 2018

1. PLANNING INFORMATION A. EFFECTIVITY All AW169 helicopters equipped with pilot collective stick assy P/N 6F6711A07831 or P/N 6F6711A07832.

B. COMPLIANCE NOTE Helicopters which "Aircraft Delivered Airworthy" date is earlier than the issuance date of this SB must comply with the Mandatory action.

Recommended action is applicable after accomplishment of the Mandatory action, or as repetitive action for all the other helicopters.

Mandatory action: within eighty (80) FH since first issue of this SB or within next inspection required in accordance with Maintenance Task 67-14 of AMPI Chapter V, whichever occurs first.

Recommended action: after first accomplishment of the Mandatory action, or since entry into service as applicable, repeat every one hundred ten (110) FH.

NOTE Maintenance Task 67-14 of AMPI Chapter V (currently prescribed every 800FH) will be updated accordingly in a next revision of the AMPI chapter V.

C. CONCURRENT REQUIREMENTS N.A.

D. REASON This Service Bulletin is issued in order to provide all the necessary instructions on how to perform the functional check of collective fixed flight control movement.

E. DESCRIPTION On 26 July 2017, Leonardo Helicopters issued the SB 169-057 in response to a reported event characterized by undesired collective stick movement in flight. It required a one-time check of the collective fixed friction force of the flight control system. Another similar event has been recently recorded in service. For both instances it has been determined that the event was generated by a collective friction

S.B. N°169-082 ALERT DATE: July 31, 2018 REVISION: A - August 3, 2018 Page 3 of 7 value below acceptable limits. Incorrect adjustment of the collective friction of the flight control system may lead to a reduction in the safety margins of controllability of an affected helicopter. Hence Leonardo Helicopters has developed this Service Bulletin in order to confirm absence of similar cases on other in-service helicopters.

The Service Bulletin also prescribes to apply a reduced time interval on the collective friction check with respect to that declared in the AMPI Chapter V (ref. Maintenance task 67-14).

F. APPROVAL The technical content of this Service Bulletin is approved under the authority of DOA nr. EASA.21.J.005. For helicopters registered under other Aviation Authorities, before applying the Service Bulletin, applicable Aviation Authority approval must be checked within Leonardo Helicopters customer portal.

EASA states mandatory compliance with inspections, modifications or technical directives and related time of compliance by means of relevant Airworthiness Directives.

If an aircraft listed in the effectivity embodies a modification or repair not LHD certified and affecting the content of this Service Bulletin, it is responsibility of the Owner/Operator to obtain a formal approval by Aviation Authority having jurisdiction on the aircraft, for any adaptation necessary before incorporation of the present Service Bulletin.

G. MANPOWER To comply with this Service Bulletin two (2) MMH are deemed necessary.

MMH are based on hands-on time and can change with personnel and facilities available.

H. WEIGHT AND BALANCE N.A.

I. REFERENCES

1) PUBLICATIONS

DATA MODULE DESCRIPTION PART DM01 69-A-00-20-00-00A-120A-A Helicopter on ground for a safe maintenance.

- DM02 69-A-67-10-00-00A-340A-A Main rotor control system - Function test -

S.B. N°169-082 ALERT DATE: July 31, 2018 Page 4 of 7 REVISION: A - August 3, 2018

2) ACRONYMS SB Service Bulletin DM Data Module DOA Design Organization Approval EASA European Aviation Safety Agency LHD Leonardo Helicopters Division

3) ANNEX N.A.

J. PUBLICATIONS AFFECTED N.A.

K. SOFTWARE ACCOMPLISHMENT SUMMARY N.A.

S.B. N°169-082 ALERT DATE: July 31, 2018 REVISION: A - August 3, 2018 Page 5 of 7

2. MATERIAL INFORMATION A. REQUIRED MATERIALS

1) PARTS N.A.

2) CONSUMABLES Refer to AMDI for the consumable materials required to comply with the AMP DM referenced in the accomplishment instructions.

3) LOGISTIC MATRIX N.A.

B. SPECIAL TOOLS Refer to ITEP for the special tools required to comply with the AMP DM referenced in the accomplishment instructions.

C. INDUSTRY SUPPORT INFORMATION N.A.

S.B. N°169-082 ALERT DATE: July 31, 2018 Page 6 of 7 REVISION: A - August 3, 2018

3. ACCOMPLISHMENT INSTRUCTIONS

GENERAL NOTES

a) Place an identification tag on all components that are re-usable, including the attaching hardware that has been removed to gain access to the modification area and adequately protect them until their later re-use.

1. In accordance with DM 69-A-00-20-00-00A-120A-A, p repare the helicopter on ground for a safe maintenance. Disconnect the battery, all electrical power sources and/or the external power supply.

2. In accordance with applicable steps of AMP DM 69-A-67-10-00-00A-340A-A, perform the “collective force check” procedure.

3. With reference to Figure 1, record the measured force values and send the compiled “collective friction force value” check table to the AW169 PSE mail box pse_aw169.mbx.aw@leonardocompany.com.

4. Return the helicopter to flight configuration and record for compliance with this Service Bulletin on the helicopter logbook.

5. Send the attached compliance form to the following mail box:

pse_aw169.mbx.aw@leonardocompany.com As an alternative, gain access to My Communications section on Leonardo WebPortal and compile the “Service Bulletin Application Communication”.

Figure 1 S.B. N°169-082 ALERT DATE: July 31, 2018 REVISION: A - August 3, 2018 Page 7 of 7

COLLECTIVE FRICTION FORCE VALUE CHECK

AIRCRAFT S/N DATE:

FH:

LANDINGS:

COLLECTIVE FRICTION FORCE VALUE CHECK CONTROL DIRECTION FRICTION FORCE Required FRICTION FORCE Measured COLLECTIVE UP DIRECTION 9.00 / 18.00 N (2.02 / 4.05 lbf) COLLECTIVE DOWN DIRECTION 9.00 / 18.00 N (2.02 / 4.05 lbf)

Remarks:

Information:

SERVICE BULLETIN COMPLIANCE FORM Date:

Number:

Revision:

Please send to the following address:

Telephone:

Fax:

B.T. Compliance Date:

Customer Name and Address:

Helicopter Model S/N Total Number Total Hours T.S.O.

LEONARDO S.p.A.

CUSTOMER SUPPORT & SERVICES - ITALY PRODUCT SUPPORT ENGINEERING & LICENSES DEPT.

Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) - ITALY Tel.: +39 0331 225036 Fax: +39 0331 225988 We request your cooperation in filling this form, in order to keep out statistical data relevant to aircraft configuration up-to-date. The form should be filled in all its parts and sent to the above address or you can communicate the application also via Technical Bulletin Application Communication Section placed in Leonardo AW Customer Portal - MyCommunications Area. We thank you beforehand for the information given.