Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9967ceadefa47e5357bb4a9ef86c231edd04415609ed45dd5abc9ecded1a2927' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9967ceadefa47e5357bb4a9ef86c231edd04415609ed45dd5abc9ecded1a2927' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Page 1 of 4
BOLLETTINO TECNICO The technical content of this document is approved under the authority of DOA nr. EASA.21J.005.
N° 412-139 DATE February 19, 2014 REV.
Compliance with this bulletin is:
SUBJECT: INSPECTION OF THE FLANGED ADAPTER P/N 412-040-622-101 AND P/N 412-040-623-101 INSTALLED ON TAIL ROTOR DRIVE SHAFTS.
REASON: Provide the necessary instructions to inspect the above mentioned flanged adapter s installed on tail rotor drive shafts.
HELICOPTERS AFFECTED:
Agusta AB412 helicopters S/N 25801 through 25900 and AB412EP helicopters S/N 25901 and subs.
COMPLIANCE:
Within and not later than 5 flight hours after the issue of this Bollettino, and subsequently every 100 flight hours.
DESCRIPTION:
AgustaWestland has recently received a report of a crack on a flanged adapter P/N 412-040 - 622-101 installed on the tail rotor drive shaft of an AB412EP helicopter.
The investigation to determine the root causes of the crack on the flanged adapter is in progress, then the requirements of this Bollettino could be updated according to the investigation results.
This Bollettino is issued in order to prescribe an inspection of the adapter-flanged P/N 412- 040-622-101 and P/N 412-040-623-101 for presence of cracks.
AgustaWestland S.p.A Via Giovanni Agusta, 520 21017 Cascina Costa di Samarate (VA) Italy T el.: +39 0331 229111 - Fax: +39 0331 229605/222595
MANDATORY An appropriate entry should be made in the aircraft log book upon accomplishment.
If ownership of aircraft has changed, please, forward to new owner.
ALERT ALERT
B.T. 412-139 Page 2 of 4 MANPOWER REQUIRED:
Approximately 3 man-hours are required to complete this Bollettino.
WARRANTY: N.A.
MATERIAL REQUIRED: N.A.
SPECIAL TOOLS: N.A.
WEIGHT AND BALANCE CHANGE: N.A.
REFERENCES:
AB412-IPC Illustrated Parts Catalogue AB412EP-IPC Illustrated Parts Catalogue AB412-MM Maintenance Manual PUBBLICATIONS AFFECTED:
AB 412-MPM Maintenance Planning Manual ACCOMPLISHMENT INSTRUCTIONS:
1. Prepare the helicopter for safe ground maintenance. Disconnect battery and all the electric power source and/or the external power supply.
2. In accordance with AB412- MM Chapter 65 gain access to the tail rotor drive shaft.
3. Using a 5X magnifying glass and a source light visually inspect the adapter-flanged P/N 412- 040-622-101 and P/N 412-040 -623-101 for presence of cracks in proximity of the fixing bolts (Refer to Figures 1 and 2).
4. If cracks are found, before the next flight remove from the helicopter the affected drive shaft assy in accordance with AB412-MM Chapter 65 and replace it with a serviceable drive shaft assy.
5. Report to AgustaWestland Product Support Engineering at the following e-mail address:
absereng@agustawestland.com any case of cracked adapter-flanged and send the affected parts for investigation.
6. If no cracks are found in accordance with AB412-MM Chapter 65 install the access panel and close the access doors removed/opened during step 2.
7. Return the helicopter to flight configuration and make an entry in helicopter applicable documentations to indicate accomplishment of this Bollettino.
B.T. 412-139 Page 3 of 4
Figure 1 - Crack found during inspection
FLANGED ADAPTER
EXAMPLE OF CRACK
FOUND DURING
INSPECTION
AREA TO BE INSPECTED
ON FLANGED ADAPTER TYP. 3 PLACES
B.T. 412-139 Page 4 of 4
Figure 2 – Detail of flanged adapter (on both sides of driveshaft)
FLANGED ADAPTER
Note:
Remarks:
Informazioni:
Information:
Al f ine di gestire le varianti alla configurazione base, in relazione all’emissione de l Bollettino Tecnico, preghiamo di voler compilare il presente modulo in tutte le sue parti e spedirlo all’indirizzo sopra indicato. Si ringrazia per la gentile collaborazione data.
We request your cooperation in filling this form, in order to keep out statistical data relevant to aircraft configuration up- to-date. The form should be filled in all its parts and sent to the above address. We thank you beforehand for the information given.
MODULO APPLICAZIONE BOLLETTINO TECNICO
TECHNICAL BULLETIN COMPLIANCE FORM Data:
Date:
Numero:
Number:
Revisione:
Revision:
Prego spedire a questo indirizzo:
Please send to the following address:
AGUSTAWESTLAND S.p.A.
CUSTOMER SUPPORT & SERVICES - ITALY PRODUCT SUPPORT ENGINEERING DPT.
Via del Gregge, 100 21015 Lonate Pozzolo (VA) - ITALY Tel.: +39 0331 664905 Fax: +39 0331 664684 Telefono:
Telephone:
Fax:
Data Applicazione B.T.:
B.T. Compliance Date:
Denominazione Cliente ed Indirizzo:
Customer Name and Address:
Modello Elicottero Helicopter Model S/N Matricola Tail Number Ore Totali Total Hours Ore D.U.R. T.S.O.