Copy · U.S. DOT/FAA - CC7 SB 53-007 R1 (11-06-13) · 14 pages

© M7 Aerospace. Filed by the FAA in regulations.gov docket FAA-2013-1057; AD 2014-06-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '792e5a77cc87d811bde7374abb58f1ef0b34f5bdc3673ff6d370f370858cb245'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

P.O. Box 790490 • San Antonio, Texas 78279–0490 • (210) 824–9421 TO: HOLDERS OF SA227 COMMUTER CATEGORY SERVICE INFORMATION

MANUALS Attached is Revision 1 to SA227 Commuter Category Service Bulletin CC7-53-007, Inspection of F.S. 69.31 Forward Pressure Bulkhead for Cracks , Issued: September 26, 2013, Revised: November 6, 2013.

Two aircraft have been inspected and found to have significant cracking of the forward pressure bulkhead between stringers 8 and 10 on both LH and RH sides. The cracks appear to be adjacent to the horizontal hat stiffeners in the radius of the bulkhead frame. With the risk of cabin decompression due to cracks in the bulkhead, this bulletin has been issued to request an immediate inspection of this area.

Revision 1 corrects step 1.D. Change denoted by revision bar in left margin.

Please insert the attached revised Chapter 53 Index pages.

P.O. Box 790490 • San Antonio, Texas 78279–0490 • (210) 824–9421

Issued: January 18, 1993 Revised: November 6, 2013 CHAPTER 53 INDEX Page 1 of 1 CHAPTER 53 – FUSELAGE

NUMBER DATE TITLE AIRCRAFT EFFECTIVITY SA227 SERIES

COMMUTER CATEGORY 53-001 01-18-93 Cabin Entrance Door Sill SA227-CC, S/N CC784-853 (R)02-25-93 Beef Up. SA227-DC, S/N DC784-853 53-002 09-22-94 Cockpit Floorboard FOD SA227-CC, S/N CC784, 790- (R)06-05-96 Barrier Installation 863 SA227-DC, S/N DC784, 790- 863 53-003 09-03-10 Installation of Form-in-Place All SA227 Commuter Gaskets - Wing-to-Body Category Airplanes Fairings 53-004 10-08-10 Access Panel Installation All SA227 Commuter (R)01-26-11 Category Airplanes 53-005 00-00-00 Pending All SA227 Commuter Category Airplanes 53-006 07-27-12 Inspection and/or Replace- All SA227 Commuter (R)05-13-13 ment of the Left Hand and Category Airplanes Right Hand Forward and Aft Wing-to-Body Attach Fittings 53-007 09-26-13 Inspection of F.S. 69.31 All SA227 Commuter (R)11-06-13 Forward Pressure Bulkhead Category Airplanes for Cracks

P.O. Box 790490 • San Antonio, Texas 78279–0490 • (210) 824–9421

Issued: September 26, 2013 Revised: November 6, 2013 CC7-53-007 R1 Page 1 of 8

SERVICE BULLETIN SA227 SERIES

COMMUTER CATEGORY

FUSELAGE Inspection of F.S. 69.31 Forward Pressure Bulkhead for Cracks

1. PLANNING INFORMATION A. Effectivity:

All SA227 Commuter Category Airplanes B. Reason:

Two aircraft have been inspected and found to have significant cracking of the forward pressure bulkhead between stringers 8 and 10 on both LH and RH sides.

The cracks appear to be adjacent to the horizontal hat stiffeners in the radius of the bulkhead frame. With the risk of cabin decompression due to cracks in the bulkhead, this bulletin has been issued to request an immediate inspection of this area.

Revision 1 corrects step 1.D. Change denoted by revision bar in left margin.

C. Description:

Perform an initial detail visual inspection of the frame flange at F.S 69.31, looking for cracking in the radius per step 2 instructions. If cracking is found, the operator is required to contact M7 Aerospace for repair. A repetitive inspection is also implemented with this bulletin.

D. Compliance:

Mandatory For aircraft with more than 30,000 flight hours, perform the inspection within the next 150 flight hours from the date of this service bulletin.

For aircraft with 25,000 to 29,999 flight hours, perform the inspection within the next 300 flight hours from the date of this service bulletin.

For aircraft with 20,000 to 24,999 flight hours, perform the inspection within the next 450 flight hours from the date of this service bulletin.

For aircraft with 11,000 to 19,999 flight hours, perform the inspection within the next 600 flight hours from the date of this service bulletin.

For aircraft with less than 11,000 flight hours, perform the inspection at 11,000 flight hours or within the next 600 flight hours from the date of this service bulletin, whichever occurs later.

Repeat inspection interval for all aircraft is every 1,000 flight hours following the initial/threshold inspection.

Issued: September 26, 2013 Revised: November 6, 2013 CC7-53-007 R1 Page 2 of 8

SERVICE BULLETIN SA227 SERIES

COMMUTER CATEGORY Inspection requirements: See step 2.

If an owner/operator has evidence to demonstrate that an inspection of FAA approved equivalent type has been performed within the three previous calendar months from the date of this bulletin, this shall qualify for the initial/threshold inspection. If this approved inspection qualifies, then the repeat inspection is every 1,000 hours from the time of that initial/threshold inspection.

E. Approval:

FAA Approved for Engineering Design.

F. Manpower:

M7 Aerospace estimates 12 man-hours (for both LH and RH sides) to accomplish this service bulletin. This includes gaining access via the forward baggage compartment, removing sealant, perform detail visual inspection, and reinstallation This estimate is for direct labor only, accomplished by an experienced crew. Adjust the estimate with operator task hour data if necessary.

G. Material – Cost and Availability:

None H. Tooling – Price and Availability:

No special tooling required.

I. Weight and Balance:

(a) For inspections only - None

(b) For installation of repair, if required. A weight of all repair parts shall be obtained before installation. These parts are roughly located at F.S. 69.31. The AFM weight and balance data shall be updated.

J. References:

M7 M-5609 Memorandum.

M7 Engineering Drawing 27-21000 (latest FAA approved revision), F.S. 69.31 bulkhead installation.

M7 Engineering Drawing 27-21028 (latest FAA approved revision), F.S. 69.31 bulkhead assembly.

ST-UN-M003, Item 4-7 bulkhead inspection.

NOTE: References are for manufacturer’s use only.

Issued: September 26, 2013 Revised: November 6, 2013 CC7-53-007 R1 Page 3 of 8

SERVICE BULLETIN SA227 SERIES

COMMUTER CATEGORY K. Other Publications Affected:

SA227 Commuter Category Structural Repair Manual (SRM).

ST-UN-M003

2. ACCOMPLISHMENT INSTRUCTIONS Inspect using an illumination device (such as circular fluorescent inspection luminaire) which produces a minimum of 150 fc of light intensity at the part surface and a magnification device (such as a watchmaker's loupe) producing approximately 8X magnification or greater. Examine those surface details specified in the inspection requirements noting defects as directed by the inspection requirements.

Inspection requirements for F.S. 69.31: Frame flange between stringers 8 and 10 on both LH and RH side of the fuselage.

A. Disconnect power to the aircraft and tag out Battery and External Power switches with placards to prevent injury to personnel or damage to the aircraft.

B. Gain access to the inspection area by removing equipment/liners/insulation in the forward baggage compartment as required.

NOTE: Depending on aircraft model, this area can have several avionics boxes mounted as well as the standard baggage bay liners and insulation.

C. Prepare the specific area for inspection by removing sealant and cleaning per SA227 Commuter Category Structural Repair Manual (SRM), chapter 51-30-02.

D. Perform a Detail Visual Inspection (DVI) of the F.S. 69.31 frame flange, looking for cracking in the radius of the frame flange. See Figures 1 through 4 for location of inspection and typical cracks.

E. If cracking is found in radius, continue DVI of surrounding structure including bulkhead web, and horizontal and vertical web stiffeners, looking for other signs of damage such as cracking, loose or pulled fasteners.

F. Report all damage to M7 aerospace at MetroTech@M7Aerospace.com or fax to 210-820-8626.

(1) Report specific crack locations, length, and orientation. Send photos or sketches of all damage. Also please provide Aircraft serial number, total aircraft hours, and total aircraft cycles.

G. Perform repair in accordance with M7 Aerospace serial number specific FAA approved Limited Aircraft Repair (LAR) or SRM instructions.

H. If no cracking is found, it is permissible to reseal per SRM 51-30-03 (pressure boundary).

Issued: September 26, 2013 Revised: November 6, 2013 CC7-53-007 R1 Page 4 of 8

SERVICE BULLETIN SA227 SERIES

COMMUTER CATEGORY I. Reassemble/reinstall all equipment/liners/insulation removed in step B. per applicable sections of the SA227 Commuter Category Maintenance Manual.

J. Remove all placards from Battery and External Power switches and reconnect power to aircraft.

K. Perform functional/operational checks on all systems that were disturbed per SA227 Commuter Category Maintenance Manual.

L. Complete aircraft records in accordance with 14 CFR 43.9.

M. Complete and return service bulletin compliance form to M7 Aerospace Technical Publications Department.

Issued: September 26, 2013 Revised: November 6, 2013 CC7-53-007 R1 Page 5 of 8

SERVICE BULLETIN SA227 SERIES

COMMUTER CATEGORY FIGURE 1 FS 69.31 FWD PRESSURE BULKHEAD (27-21028) Stringer 8L Stringer 9L Stringer 10L Typical cracking along frame radius between stringers 8 to 9, and 9 to 10.

LEFT HAND SIDE SHOWN

RIGHT HAND SIDE

OPPOSITE

VIEW LOOKING AFT

Issued: September 26, 2013 Revised: November 6, 2013 CC7-53-007 R1 Page 6 of 8

SERVICE BULLETIN SA227 SERIES

COMMUTER CATEGORY FIGURE 2

RHS VIEW OF BULKHEAD WITH CRACKS NOTED (VIEW LOOKING AFT INSIDE FWD BAGGAGE COMPARTMENT) Stringer 8 Stringer 9

Issued: September 26, 2013 Revised: November 6, 2013 CC7-53-007 R1 Page 7 of 8

SERVICE BULLETIN SA227 SERIES

COMMUTER CATEGORY FIGURE 3

LHS VIEW OF BULKHEAD WITH CRACKS NOTED (VIEW LOOKING AFT INSIDE FWD BAGGAGE COMPARTMENT) Stringer 9

Issued: September 26, 2013 Revised: November 6, 2013 CC7-53-007 R1 Page 8 of 8

SERVICE BULLETIN SA227 SERIES

COMMUTER CATEGORY FIGURE 4

TYPICAL CRACK LOCATION (VIEW WITH EXTERNAL FUSLAGE SKIN REMOVED) CRACK

Pages 13–14 of 14