On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 2OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Pacific Aerospace. Filed by the FAA in regulations.gov docket FAA-2014-0532; AD 2014-21-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '0073e9ae98d81370870b373aa3c5b943e1e3c28d2feedeb54104bcf353c74dcb' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '0073e9ae98d81370870b373aa3c5b943e1e3c28d2feedeb54104bcf353c74dcb' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
PACIFICAEROSPACE Pacific Aerospace Limited MANDATORY SERVICE Airport Road, Hamilton Private Bag 3027, Hamilton 3240, New Zealand TEL +6478436144 FAX +6478436134 EMAIL pacific@aerospace.co.nz PACSB / FU / 095 WEB www.aerospace.co.nz ISSUE 2
CONTROL COLUMN CRACKING
1. PLANNING INFORMATION A. EFFECTIVITY All FU24 & FU24A series aircraft.
B. REASON There has been one reported incident of cracking of the Control Column due to mechanical damage at the location of 5/16 dia hole for electrical wiring.
C. DESCRIPTION Control Column (P/N 08-45031/32) to be inspected N for any cracking, mechanical damage or modification at the location of 5/16 dia hole for electrical wiring (refer to Figure 1).
D. COMPLIANCE Before further flight, carry out Accomplishment Instructions (Para 2.).
Thereafter refer to FU24 950 & 954 Maintenance Manuals, Chapter 05, for the repetitive inspection requirements of the control column.
E. TOOLING No special tools are required F. WEIGHT AND BALANCE Not affected.
G. REFERENCE FU24 & FU24A-950 / FU24 & FU24A-954 Maintenance Manual TR FU/MM/05/001.
H. HOURS REQUIRED 0.5 hours I. WARRANTY COVER Normal warranty conditions apply.
Issued: 28 May 2014 Page 1 of 2
PACIFICAEROSPACE PACSB / FU / 095 ISSUE 2
2. ACCOMPLISHMENT INSTRUCTIONS (Refer to Figure 1)
1) Inspect Control Column for any cracks, mechanical damage or modification at the location of 5/16 dia hole for electrical wiring.
2) If any cracks are found, replace the control column before further flight (refer to applicable FU24 MM, Chapter 27).
3) If any mechanical damage or modifications are found, accomplish the following:
a) Carry out a liquid penetrant inspection IAW ASTM E1417 (or equivalent approved standard) of the control column at intervals not to exceed 50 hours TIS until replacement.
b) Replace the control column at the next maintenance inspection, or within the next 150 hours TIS, whichever is the later.
NOTE: Replacement of damaged or modified control columns is a termination action to the repetitive NDT inspections required by this SB.
08-45031/32
CONTROL COLUMN 5/16" DIA HOLE FIGURE 1 CONTROL COLUMN INSPECTION
3. CERTIFICATION Record the compliance with this Service Bulletin in the Airframe Log Book.
4. MATERIAL REQUIRED:
N/A Page 2 of 2 Issued: 28 May 2014