Piaggio SB 80-0101: Revision ZZ, text

TextOCR

This text is OCR from a scan. OCR can misread letters and numbers.

Query with SQL

duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'f4a78eed576e9eb3baa6786ed7fd416c3f067a5ba3d55c81f92eae592b598dda'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
WHERE p.file_sha256 = 'f4a78eed576e9eb3baa6786ed7fd416c3f067a5ba3d55c81f92eae592b598dda'
ORDER BY p.page

Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.

Page 1OCROpen in PDF

PIAGGIO PIAGGIO AERO INDUSTRIES S.p.A.

AERO Via Cibrario, 4 - 16154 Genoa, Italy Product Support Department The EASA states mandatory compliance with inspections, modifications or technical directives and related time compliance by means of relevant Airworthiness Directives SERVICE BULLETIN (MANDATORY) N.: 80-0101 REV ZZ ATA CHAPTER: 54-10-00 MODIFICATION N.: N/A TITLE: ENGINE NACELLE INNER PANELS - INSPECTION

REVISION STATUS OF THE BULLETIN This Bulletin is at the Revision ZZ status and consists of 3 pages.

This revision supersedes previous issues of this Service Bulletin.

This revision has been issued to cancel this Service Bulletin.

The parts which are affected by this revision are marked with a vertical line on the right side of the Page.

No further action is required to operators that have already accomplished previous issues of this Service Bulletin.

1. PLANNING INFORMATION A. EFFECTIVITY Service Bulletin cancelled: NA.

B. CONCURRENT REQUIREMENTS Service Bulletin cancelled: NA.

C. REASON Due to a possible nacelle panel inner film detachment, in correspondence of the engine plenum chamber after a short in-service period, a visual inspection was required in accordance with original issue of this Service Bulletin.

Following improvement in production, the inspection is no longer required.

D. DESCRIPTION Service Bulletin cancelled: N/A.

E. COMPLIANCE Service Bulletin cancelled: N/A.

Original Issue: May 06, 1998 Service Bulletin: 80-0101 Rev. N. ZZ Date: February 19, 2013 Page: 1 of 3

Page 2OCROpen in PDF

PIAGGIO/ PIAGGIO AERO INDUSTRIES S.p.A.

AERO Via Cibrario, 4 - 16154 Genoa, Italy Product Support Department F. APPROVAL The technical content of this Service Bulletin has been approved under the Authority of EASA DOA No EASA.21J.220.

G. MANPOWER Service Bulletin cancelled: N/A.

H. TECHNICAL INFORMATION For questions concerning the technical content of this Service Bulletin, please contact:

Piaggio Aero Industries - Product Support Department Via Cibrario, 4 - 16154 Genoa, Italy Fax No. : + 39 010 6481 374 E-mail: tech.support@piaggioaero.it I. MATERIAL - COST AND AVAILABILITY Service Bulletin cancelled: N/A.

J. TOOLING - COST AND AVAIL N/A K. WEIGHT AND BALANCE N/A L. ELECTRICAL LOAD DATA N/A M. REFEREYCES N. PUBLICATIONS AFFECTED

2. ACCOMPLISHMENT INSTRUCTIONS Service Bulletin cancelled: N/A.

Original Issue: May 06, 1998 Service Bulletin: 80-0101 Rev. N. ZZ Date: February 19, 2013 Page: 2 of 3 |

Page 3OCROpen in PDF

PIAGGIO/ AERO Via Cibrario, 4 - 16154 Genoa, Italy PIAGGIO AERO INDUSTRIES S.p.A.

Product Support Department

3. MATERIAL INFORMATION A. LIST OF MODIFICATION KIT COMPONENTS N/A B. LIST OF MATERIALS - OPERATOR SUPPLIED N/A C. LIST OF TOOLS N/A.

D. DISPOSAL OF REMOVED PART N/A E. WARRANTY CREDIT PROGRAM N/A

4. WARNING - PROPRIETARY RIGHTS This bulletin contains proprietary information of Piaggio Aero Industries S.p.A. (PAI), which PAI provides in confidence and solely for the purposes of supporting PAI products and providing applicable information regarding the proper use, maintenance, inspection, repair, servicing and parts application of PAI products. Neither this bulletin nor any information in may be disclosed to others, or used for any other purpose, including, without limitation, to design, create, develop, reproduce, manufacture or derive any design, part, product, material, process, modification, configuration change or repair, or obtain any government approval to do so. This material is the exclusive property of Piaggio Aero Industries SpA. and therefore shall not be reproduced, used or disclosed to others except as authorized by contract with Piaggio Aero Industries S.p.A. or without the written permission of Praggio Aero Industries S.p.A..

Original Issue: May 06, 1998 Service Bulletin: 80-0101 Rev. N. ZZ Date: February 19, 2013 Page: 3 of 3