TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '66c99d7cebb15b8c09f55df2cf000e2387ac79ce96846f37b65a15a7cc8be5e6' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '66c99d7cebb15b8c09f55df2cf000e2387ac79ce96846f37b65a15a7cc8be5e6' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 1 of 15 Mod. PA_D007_ed_0 PIAGGIO AVIATION S.p.A.
Viale Generale Disegna, 1 - 17038 Villanova d’Albenga (SV), ITALY.
The EASA states mandatory compliance with inspections, modifications or technical directives and related time compliance by means of relevant Airworthiness Directives.
SERVICE BULLETIN (MANDATORY) N.: 80-0430 REV.1 ATA CHAPTER: 30-30 MODIFICATION N.: 80-1283; 80-1394 TITLE: TAT PROBE HEATER INHIBITION ON GROUND
REVISION STATUS OF THE BULLETIN This MANDATORY Service Bulletin (SB) is at Revision status 1 and consists of 15 pages, plus Confirmation Slip.
This Service Bulletin is revised to:
extend Effectivity to all airplanes equipped with Magnaghi Landing Gear (§ 1.A., 1.B.);
update the Compliance (§ 1.E.);
update the accomplishment instructions with the label installation (§ 2.);
update the material information (§ 3.A.);
update format to current Piaggio Aviation publication standards.
This Revison supersedes the original issue of this Service Bulletin.
Operators in compliance with the original issue of this Service Bulletin are only required to perform the installation of the label in accordance with the instructions in § 2., step 23) of this SB: no further action is necessary.
The parts which are affected by this Revision are marked with a vertical line on the right side of the Page.
1. PLANNING INFORMATION A. EFFECTIVITY Piaggio Aero Industries (PAI) P180 Avanti II Manufacturer’s Serial Number (MSN):
from 1002; 1105 thru 1234 and from 3001 thru 3007.
B. CONCURRENT REQUIREMENTS PAI modification no. 80-1089 “P180: New Nose Landing Gear System” (or Service Bulletin no. 80-0425 or no. 80 -0454) and no. 80 -1131 “P180: New Main Landing Gear System” (or Service Bulletin no. 80-0425 or no. 80 -0454) or modification no.
80-1300 “Update of NLG Leg and MLG Leg (with S/A) P/Ns due to minor improvements” (or Service Bulletin no. 80-0425): embodied.
C. REASON This MANDATORY Service Bulletin provides instructions to modify the TAT heater circuit in order to inhibit its engagement on ground when Pitot heater is turned ON.
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 2 of 15 Mod. PA_D007_ed_0 PIAGGIO AVIATION S.p.A.
Viale Generale Disegna, 1 - 17038 Villanova d’Albenga (SV), ITALY.
D. DESCRIPTION General This MANDATORY Service Bulletin consists of the following:
removal of interiors in the flight compartment area (FR 0);
installation of relay support;
installation of new terminal juction boards;
installation of new relay;
modification of TAT heater electrical connections;
installation of the relevant label on the cockpit instrument panel;
installation of interiors in the flight compartment area.
E. COMPLIANCE This MANDATORY Service Bulletin shall be accomplished within: 6 60 FH or 24 months from the issue date of this Revision (whichever occurs first).
In compliance with this Service Bulletin, please complete the attached Confirmation Slip and send it back to Piaggio Aviation S.p.A..
F. APPROVAL The technical conte nt of this Service Bulletin has been approved under the Authority of DOA No EASA.21J.685.
G. MANPOWER This MANDATORY Service Bulletin shall be accomplished in approxim ately: 30 man-hours (MH).
NOTE: estimated man -hours do not include time necessary for removal/installation of interiors furnishing and to return the aircraft to a flyable status.
H. TECHNICAL INFORMATION For questions concerning the technical content of this SB, please contact:
Piaggio Aero Industries – P180 Customer Support Via Pionieri e Aviatori d’Italia, 2 - 16154 Genoa, Italy Fax No. : (+ 39) 010 099 8400 E-mail: technicalsupport@piaggioaerospace.it I. MATERIAL – COST AND AVAILABILITY For pricing, availability and scheduling, please contact:
- for customers and operators in Europe, Asia and RoW e-mail: spareparts@piaggioaerospace.it
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 3 of 15 Mod. PA_D007_ed_0 PIAGGIO AVIATION S.p.A.
Viale Generale Disegna, 1 - 17038 Villanova d’Albenga (SV), ITALY.
telephone: (+39) 335 810 59 20
- for customers and operators in the Americas e-mail: spares@piaggioamerica.com telephone : (+1) 561 253 0104 fax: (+1) 561 683 5513 J. TOOLING – COST AND AVAILABILITY N/A K. WEIGHT AND BALANCE N/A L. ELECTRICAL LOAD DATA N/A M. REFERENCES Document Title Document Number Chapter/Section Airplane Maintenance Manual (AMM) 180-MAN-0200-01105 180-MAN-0200-01105(E) 07-10-00 08-20-00 11-30-00 20-10-02 20-20-01 24-00-00 25-10-00 33-20-00 35-20-00 33-41-00 53-10-00 53-60-00 Illustrated Parts Catalogue (IPC) 180-MAN-0100-01103 180-MAN-0100-01103(E) 25-28-01 25-28-04 25-28-08 25-28-84 Wiring Manual (WM) 180-MAN-0150-01104 180-MAN-0150-01104(E) 29-30-00 30-30-00 Airplane Flight Manual (AFM) 180-MAN-0010-01100 Section 4 – Normal Procedures
N. PUBLICATIONS AFFECTED N/A
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 4 of 15 Mod. PA_D007_ed_0 PIAGGIO AVIATION S.p.A.
Viale Generale Disegna, 1 - 17038 Villanova d’Albenga (SV), ITALY.
2. ACCOMPLISHMENT INSTRUCTIONS Procedure
(1) Lift the aircraft on jacks (ref. to AMM TASK 07-10-00-500-801).
(2) Remove the internal electrical power (ref. to AMM TASK 24-00-00-000-801).
(3) Remove the Pilot and Copilot seats (ref. to AMM TASK 25-10-000-801).
(4) Remove the flight compar tment furnishing and get access to the structural panels behind the instruments (ref. to AMM TASK 25-10-00-000-803 and to Fig. 1).
(5) Remove the Pilot Central Panel (ref. to AMM TASK 31-10-00-000-805).
Fig. 1 - Cockpit furnishing removal
(6) Position the relay support P/N 81-111191-001 in its installation area (ref. to Fig. 2)
(7) Mark in the structural central panel no. 2 holes existing on relay support P/N 81 - 111191-001 (ref. to Fig. 2).
(8) Drill on structural central panel no. 2 holes previously marked.
(9) Deburr the holes previously drilled.
(10) Install on structural central panel inner surface (copilot side) the relay support P/N 81-111191-001 using no. 2 screws P/N NAS1802 -06-6, no.2 washers P/N NAS1149DN816K and no. 2 nuts P/N MS21042-06 (ref. to Fig. 2)
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 5 of 15 Mod. PA_D007_ed_0 PIAGGIO AVIATION S.p.A.
Viale Generale Disegna, 1 - 17038 Villanova d’Albenga (SV), ITALY.
(11) Install on relay support P/N 81-111191-001 the relay socket P/N M12883/55 -02 and the relay P/N M83536/37-003 (K6001) (ref. to Fig. 2).
Fig. 2 – Relay support/Relay installation
(12) Disconnect from pin “J” of Terminal Junction TJ6050 the wire number: 2930 -0072A- UU22--G (ref. to Fig. 3).
(13) Disconnect from connector P4076 pin “n” the wire number F025B16 or 3030-0003A- UU16—D (ref. to Fig. 4a/4b).
(14) Disconnect from connector P4075 pin “n” the wire number F026B16 or 3030-0022A- UU16--D (ref. to Fig. 5a/5b).
(15) Connect the wire num ber 2930 -0072A-UU22--G to pin “N” of Terminal Junction TJ4030 (ref. to Fig. 6).
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 6 of 15 Mod. PA_D007_ed_0 PIAGGIO AVIATION S.p.A.
Viale Generale Disegna, 1 - 17038 Villanova d’Albenga (SV), ITALY.
(16) Connect the wire number F025B16 (or 3030-0003A-UU16—D) to relay K6001 pin “A3” (ref. to Fig. 7).
Note 1: since the cable on board is short, join it with a splice to the cable F025B16 parts of kit P/N 81M000001-401.
(17) Connect the wire number F026B16 (or 3030-0022A-UU16--D) to Terminal Junction TJ4036 pin “F” (ref. to Fig. 8).
Note 2: since the cable on board is short, join it with a splice to the cable F026B16 P/N 81M000001-401.
(18) Install on board the wire number 3030 -0022B-UU16--D (part of kit P/N 81M000001-
401) and connect it from connector P4075 pin “n” to Terminal Junction TJ4036 pin D (ref. to Fig. 8).
(19) Install on board the wire number 3030-0022C-UU16--D (part of kit P/N 81M000001 -
401) and connect it from Terminal Junction TJ4036 pin “B” to Relay K6001 pin “X1” (ref. to Fig. 8).
(20) Install on board the wire number 3030-0027A-UU20--G (part of kit P/N 81M000001 -
401) and connect it from Terminal Junction TJ4030 pin “P” to Relay K6001 pin “X2” (ref. to Fig. 7).
(21) Install on board the wire number 3030-0026A-UU16--D (part of kit P/N 81M000001 -
401) and connect it from connector P407 6 pin “n” to Relay K6001 pin “A2” (ref. to Fig. 7).
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 7 of 15 Mod. PA_D007_ed_0 PIAGGIO AVIATION S.p.A.
Viale Generale Disegna, 1 - 17038 Villanova d’Albenga (SV), ITALY.
Fig. 3 – Nose PSEU electrical coonnections: pre-mod
PIAGGIO AVIATION S.p.A.
PRACIO T AVIATION Viale Generale Disegna, 1 - 17038 Villanova d'Albenga (SV), ITALY.
E4013
CENTRAL CTRL PNL P4076 J2 F025B16 E4015 ANNUNCIATOR PNL F005B20 +28VDC AOA PROBE HTR F007A16 +28VDC R STATIC HTR J2 P4080 F015B16 R PITOT/STATIC HTR PWR F016A20 +28VDC R PITOT HTR F025B16 +28VDC TAT SENSOR HTR R PITOT HTR 123- - F018A22 F018A22 R PITOT HTR FAIL F022A22N R PITOT HTR FAIL GND Fig. 4a - Central Control Panel - electrical connections: pre-mod (Part 1 of 2)
• 3030-0003A-UU16-D 3160 214 E4013 CENTRAL CTRL PNL 2110 J2 P4076 BKS P4078
•SEVDC TAT SENSOR HTF 28VDC R PITOT HTR R PITOT/STATIC HER DWE - 2800-0005A-UU16-D +28VDC R STATIC HTR • 3030-0006A-UU16--G +28VDC AOA PROBE HTR. • 3030-0012A-UU20-D R PITOT HTR FAIL. —• 3030-0013A-UU22--G- 9700 R PITOT HTR FAIL GND. F • 3030-0014A-UU22-CG-13-11 G4004 212 Fig. 4b - Central Control Panel - electrical connections: pre-mod (Part 1 of 2) Original Issue: Aug. 10th, 2017 Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 8 of 15 Mod. PA_D007_ed_0
PIAGGIO AVIATION S.p.A.
PLACIO TO AVIATION Viale Generale Disegna, 1 - 17038 Villanova d'Albenga (SV), ITALY.
P4079 G4004 P4075 FQ19A22 F019A22 L PITOT HTR FAIL
PITOT HTR F003B18 L PITOT/STATIS HTR PWR F0Q2B20 AOA PROBE HTR PWR
- 026B16 TAT SENSOR HTR PVR F004A20 +28VDC L STATIC HTR 5023A22N DITST HIR FAIL GND G4003 I SP4045 F004A20 SP4046
- F008A20N • HR3 P4005 _ INSTRUMEN STATIC POR g9rm Fig. 5a - Central Control Panel - electrical connections: pre-mod (Part 2 of 2) 2110 214 J1 P4075 BKS P4076 L PITOT HTR FAIL. • 3030-0015A-UU22--G- +28VDC L STATIC HTR- c • 3030-0016A-UU20--G 3112 215 BKS P4005 P4005 L PITOT/STATIC HIR WRI • 3030-0019A-UU20--G
• 3030-0020A-UU18-D AOA PROBE HTR • 3030-0021A-UU20-D TAT SENSOR HTR PWRJ • 3030-0022A-UU16-D L PITOT HTR FAIL GND. • 3030-0023A-UU22-CG- 9700 211 +28VDC L PITOT HTR D G4003 Fig. 5b - Central Control Panel - electrical connections: pre-mod (Part 2 of 2) Original Issue: Aug. 10th, 2017 Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 9 of 15 Mod. PA_D007_ed_0
Original Issue: Aug. 10th, 2017
Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 10 of 15 Mod. PA_D007_ed_0 PIAGGIO AVIATION S.p.A.
Viale Generale Disegna, 1 - 17038 Villanova d’Albenga (SV), ITALY.
Fig. 6 – Nose PSEU electrical connections: post-mod
PIAGGIO AVIATION S.p.A.
Viale Generale Disegna, 1 - 17038 Villanova d'Albenga (SV), ITALY.
2732 3030 225 225 K6001 TJ4030 81-008002 - HYDRAULIC LDG GEAR POSITION 2> # 3030-0027A-UU20--G X1 F025B16 or = 3030-0003A-UU16--D 3160 21+ E4013 CENTRAL CTRL PNL 2110 214 J2 P4076 +28VDC TAT SENSOR HTR +28VDC R PITOT HTR • 3030-0026A-UU16--D • 3030-0001A-UU20--G R PITOT/STATIC HTR PWR • 3030-0005A-UU16--D +28VDC R STATIC HTR = 3030-0006A-UU16-G +28VDC AOA PROBE HTR = 3030-0012A-UU20--D R PITOT HTR FAIL _ • 3030-0013A-UU22--G- R PITOT HTR FAIL GND F + 3030-0014A-UU22-CG-LI1 9700 212 G4004 Fig. 7 - Central Control Panel/Relay K6001 - electrical connections: post-mod (Part 1 of 2) Original Issue: Aug. 10th, 2017 Service Bulletin: 80-0430 Rev.N.01 Date: April. 30th, 2019 Page: 11 of 15 Mod. PA_D007_ed_0
PIAGGIO AVIATION S.p.A.
PIAGGIO AVIATION Viale Generale Disegna, 1 - 17038 Villanova d'Albenga (SV), ITALY.
J1 P4075 BKS P4075 L PITOT HTR FAIL. = 3030-0015A-UU22--G
CENTRAL
CONTROL PANEL TO RELAY K6001 PIN "X1" +28VDC L STATIC HTR = 3030-0016A-UU20-G- 3112 215 BKS P4005 P4005 * 3030-0019A-UU20--G- L PITO T/STATIC HTR PWR = 3030-0020A-UU18--D g AC A PROBE HTR PWR = 3030-0021A-UU20--D TAT SENSOR HTR PWR • 3030-0022B-UU16--D L PITOT HTR FAIL GND . • 3030-0023A-UU22-CG-R 3311 225 +28VDC PITOT HTR 9700 211 LABEL TJ4036 G4003 F026B16 or * 3030-0022A-UU16-D Fig. 8 - Central Control Panel/ Relay K6001 - electrical connections: post-mod (Part 2 of 2) LABEL P/N 81-11/017-001
A/C CONFIGURATION ALLOWS PITOT HEATERS
SWITCH ON DURING GROUND OPERATIONS (REF. AFM SEC. 4) i30 Fig. 9 - Label P/N 81-111017-001 installation Original Issue: Aug. 10th, 2017 Service Bulletin: 80-0430 Rev.N. 01 Date: April. 30th, 2019 Page: 12 of 15 Mod. PA_D007_ed_0