Service bulletin · Pratt & Whitney Canada

On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

Revision 9PWC PT6A-72-1669 Revision 9 · 14 pages · 137 KB

© Pratt & Whitney Canada. Filed by the FAA in regulations.gov docket FAA-2020-0692, the docket of AD 2022-08-13. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2020-0692 (document 0018) · AD 2022-08-13

PWC PT6A-72-1669PWC PT6A-72-1669 · 14 pages · 2.7 MB

© Pratt & Whitney Canada. Filed by the FAA in regulations.gov docket FAA-2013-0766; AD 2014-17-08, 2014-17-08 R1 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2013-0766 (document 0008) · AD 2014-17-08, AD 2014-17-08-R1

Type
Service Bulletin
Number
PT6A-72-1669
Latest revision known
PT6A-72-1669, Revision 9, dated June 28, 2013

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 3

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 14

Revision 9, the newest copy. From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Pratt & Whitney Canada. Filed by the FAA in regulations.gov docket FAA-2020-0692, the docket of AD 2022-08-13. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'd93513a5a09d3860fb1c66ba4660a5cd66fa756300c9c74d9504ee6fbfaa8008'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

BULLETIN INDEX LOCATOR 72-50-02

TURBOPROP ENGINE

COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

MODEL APPLICATION PT6A-114, PT6A-114A Commercial Support Program No: 1004551 Compliance: 3, 3, 3 Summary: There can be blade creep at the compressor turbine area when the engine is operated at higher temperatures and power than the Pilot Operating Handbook (POH) recommended power settings.

T o prevent creep-related events, this service bulletin introduces:

v a borescope inspection for Pre-SB1669 blades.

v a metallurgical evaluation of a sample of Pre-SB1669 blades at HSI; or v a new compressor turbine disk balancing assembly which incorporates redesigned turbine blades made from a different material.

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 1669R9 Jul 22/2008 PT6A-72-1669 Revision No. 9: Jun 28/2013 Cover Sheet

24-Hour Global Service USA & CANADA........................ 1-800-268-8000 Other1-450-647-8000

CFIRST CENTRE International .................... (IAC*)+8000-268-8000 Fax1-450-647-2888

Toll free where available (SIL GEN-027) * International Access Code Web Site .................................. www.pwc.ca

WARNING - PROPRIETARY RIGHTS & EXPORT CONTROLS NOTICE This bulletin contains proprietary information of Pratt & Whitney Canada Corp. ( ″P&WC″), which P&WC provides in confidence and solely for the purposes of supporting engine certification and providing applicable information regarding the proper use, maintenance, inspection, repair, servicing and parts application of P&WC products and services, as directed therein. Neither this bulletin nor any information in it may be disclosed to others, or used for any other purpose, including, without limitation, to design, create, develop, reproduce, manufacture or derive any design, part, product, material, process, modification, configuration change or repair, or obtain FAA or other government approval to do so. Possession and use of this bulletin is also subject to the restrictions set out in P&WC’s T echnical Data Agreement (a copy of which may be obtained by contacting P&WC T echnical Publications). The contents of this bulletin may be subject to export control laws. Unauthorized export or re-export of the bulletin, or parts thereof, is prohibited. By accepting and possessing this bulletin, you agree to be bound by the foregoing terms.

If a Government agency or department intends to disclose any information, written notice should be given to:

VP - Legal Services, Pratt & Whitney Canada Corp., 1000 Marie-Victorin (01BE5), Longueuil, Quebec J4G 1A1.

Export Control Classification *Data is subject to the jurisdiction of the Export and Import Controls Bureau of the Department of Foreign Affairs and International Trade of Canada, Department of Commerce of the United States and/or Department of State of the United States.

** Data is not subject to the jurisdiction of the Department of Commerce of the United States or Department of State of the United States but would become subject if exposed to any US involvement.

Regulation Classification Number Canadian ECL(s)* ECCN(s)* P-ECCN(s)** 9E991 USML (ITAR)* P-USML**

REVISION TRANSMITTAL SHEET TURBOPROP ENGINE MODEL PT6A SUBJECT : Pratt & Whitney Canada Service Bulletin No. PT6A-72-1669, Rev. No. 9, dated Jun 28/2013 (P&WC S.B. No. 1669R9) COMPRESSOR TURBINE BLADES - INSPECTION/

REPLACEMENT OF Replace your existing copy of this service bulletin with the attached revised bulletin. Destroy the superseded copy.

Please retain this Revision Transmittal Sheet with the revised bulletin.

SUMMARY: This revision is issued to:

v add the Engine Serial Numbers in Para. 1.A., Effectivity.

v add CT Blade Trailing Edge Borescope inspection;

v add a two-CT blade sample for metallurgical evaluation at an overhaul facility.

v modify the compliance code to read 3.

v change the part replacement code from the disk to read 07 in lieu of 02.

EFFECT OF REVISION ON PRIOR ACCOMPLISHMENT :

None.

NOTE: A black bar in the left margin indicates a change in that line of text or figure.

REVISION HISTORY:

Original Issue: Jul 22/2008 Revision No. 1: Jul 25/2008 Revision No. 2: Aug 15/2008 Revision No. 3: Sep 08/2008 Revision No. 4: May 05/2009 Revision No. 5: Jun 11/2009 Revision No. 6: Jul 14/2009 Revision No. 7: Jun 19/2012 Revision No. 8: Jan 17/2013 Revision No. 9: Jun 28/2013 Pratt & Whitney Canada Corp.

1000, Marie-Victorin Longueuil, Québec, Canada J4G 1A1 Tél. 450-677-9411 28 June 2013 P&WC S.B. No. 1669R9

No text on this page: it may be a figure. Open the PDF to see it.

1. Planning Information A. Effectivity PT6A-114 Engines which include Serial No. PCE-17001 thru PCE-17495.

PT6A-114A Engines Serial No. which are before and include PC1611, PCE-19101 thru PCE-19402 and excluding PCE-PC0463, PC0720, PC1266, PC1382, PC1476 and PC1563.

B. Concurrent Requirements None.

C. Reason

(1) Problem There can be blade creep at the Compressor Turbine (CT) area.

(2) Cause The engine may have been operated at a higher temperature and higher power than the recommended power settings in the pilot operating handbook.

(3) Solution Introduce an inspection and a metallurgical evaluation of Pre-SB1669 blades or incorporate a new CT disk balancing assembly which incorporates redesigned turbine blades made from a different material.

D. Description This service bulletin is:

v (Part A) For engines not incorporating Part C, perform a borescope inspection of the CT blades trailing edge at each fuel nozzle inspection to a maximum of 400 Hrs.

v (Part B) For engines not incorporating Part C, submit a two-CT blade sample for metallurgical evaluation at an overhaul facility at HSI (Ref. P&WC SB No. 1703).

v (Part C) Replacing the CT disk balancing assembly or replacing the compressor turbine blades with new ones and re-identify the CT disk balancing assembly.

E. Compliance For CT Blade Trailing Edge Borescope inspection of (Part A):

CATEGORY 3 - P&WC recommends to Inspect in conjunction with each fuel nozzle inspection, to a maximum of 400 hrs.

NOTE: Accomplishment of the borescope inspection is recommended within 150 Hrs of issuance of this revision, if not conducted at previous nozzle inspection.

P&WC No. D9297J, D9297K, DCR5948, DCR5994, DCR6780, D9297R, DCR18946, E5427A, DCR21872, DCR22576, DCR23014

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 1669R9 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669 Revision No. 9: Jun 28/2013 Page 1 of 10© 2008 Pratt & Whitney Canada Corp.

PRINTED IN CANADA

TURBOPROP ENGINE

COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

1. Planning Information (Cont’d) For engines at HSI (Part B):

CATEGORY 3 - P&WC recommends to submit a two-CT blade sample for metallurgical evaluation at an overhaul facility (Ref. P&WC SB No. 1703).

For CT blades replacement of (Part C):

CATEGORY 3 - P&WC recommends to do this service bulletin when the engine is disassembled and access is available to the necessary subassembly

(i.e. module, accessories, components, or build groups). Do all spare subassemblies, but not to exceed 36 months from the date of issue of this revision.

F . Approval D.O.T ./D.A.A. approved.

G. Manpower For CT blades borescope inspection:

Once you have access to the part, an estimate of 4.0 man-hours is required to include this service bulletin at maintenance.

For engines at HSI:

Once you have access to the part, an estimate of 4.0 man-hours is required to include this service bulletin at maintenance.

For CT blades replacement:

Once you have access to the part, an estimate of 8.0 man-hours is required to include this service bulletin at maintenance.

For Disk Balancing Assy-Compressor Turbine replacement:

Once you have access to the part, an estimate of 1.0 man-hours is required to include this service bulletin at maintenance.

H. Weight and Balance None.

I. Electrical Load Data Not changed.

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 1669R9 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669 Revision No. 9: Jun 28/2013 Page 2 of 10

TURBOPROP ENGINE

COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

1. Planning Information (Cont’d) J. Software Accomplishment Summary Not applicable.

K. References Illustrated Parts Catalog P/N 3043514 (PT6A-114, PT6A-114A, PT6A-135, PT6A-135A) Maintenance Manual P/N 3043512 (PT6A-114, PT6A-114A, PT6A-135, PT6A-135A) Overhaul Manual P/N 3021243 (PT6A-34, PT6A-34AG, PT6A-34B, PT6A-35, PT6A-36, PT6A-114, PT6A-114A, PT6A-135, PT6A-135A) P&WC S.B. No. 1703 L. Publications Affected Illustrated Parts Catalog P/N 3043514 (PT6A-114, PT6A-114A, PT6A-135, PT6A-135A) M. Interchangeability and Intermixability of Parts Interchangeability - Refer to Para. 2.C.

Intermixability - Not intermixable, must be replaced as a complete set.

2. Material Information A. Industry Support Information Refer to Commercial Support Program Notification 1004551.

B. Material - Cost and Availability You can get the procurable parts listed in Para. 2.C. from any Pratt & Whitney Canada Parts Distribution Center.

The estimated total cost of new parts needed to replace old parts is $Quote (US, 2008).

The new parts are scheduled to be available in (June 2009).

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 1669R9 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669 Revision No. 9: Jun 28/2013 Page 3 of 10

TURBOPROP ENGINE

COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

C. Material Necessary for Each Engine The quantity of materials listed in this section is on a per Engine basis.

New P/N Keyword Old P/N Qty Est. Unit List Price ($US, 2008) Instructions Disposition 3072801-01 Disk Balancing Assy- Compressor Turbine 3045761-01 1 Quote (A)(B) 3072791-01 Ê Blade-Turbine 3045741-01 58 Quote (C)(D) For post P&WC S.B. No. 1455 engines.

3072801-01 Disk Balancing Assy- Compressor Turbine 3102421-01 1 Quote (A)(B) 3072791-01 Ê Blade-Turbine 3039901 58 Quote (C)(D) For pre P&WC S.B. No. 1521 engines.

3072801-01 Disk Balancing Assy- Compressor Turbine 3102421-01 1 Quote (A)(B) 3072791-01 Ê Blade-Turbine 3102401-01 58 Quote (C)(D) (A) RESTRICTED INTERCHANGEABILITY - (ATA 200 Explanation Code 07):

The old and the new part must be replaced by the new part.

(B) T o get the new part it is possible to make a modification to the old part, or you can get the new part from any Pratt & Whitney Canada Distribution Center.

(C) INTERCHANGEABLE AS A SET - (ATA 200 Explanation Code 06):

When the replacement set is a single part number, the old and the new parts are interchangeable in complete sets only.

(D) Subject to metallurgical evaluation, blades removed in compliance with Part B may be replaced with the same Part Number prior to incorporation of Part C.

D. Reidentified Parts The following list of parts can be reworked:

OLD P/N NEW P/N 3045761-01 3072801-01 3102421-01 3072801-01

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 1669R9 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669 Revision No. 9: Jun 28/2013 Page 4 of 10

TURBOPROP ENGINE

COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

E. T ooling - Price and Availability T ool No. Nomenclature Est. Price ($US,) Delivery PWC71903 Blade Stretch Quote

3. Accomplishment Instructions A. For CT Blade Trailing Edge Borescope inspection of (Part A):

NOTE: This inspection is not required if the blades have been replaced with Post-SB1669 blades in accordance with Part C.

(1) Do the borescope inspection of the CT blades (Ref. MM 72-00-00. T able 601 Borescope inspection).

(2) Write accomplishment of P&WC S.B. No. 1669 Part A in the applicable engine module log book.

TABLE 1, Compressor Turbine Blades Serial Numbers Blade Position Serial No. Blade Position Serial No. Blade Position Serial No.

12 1 4 1 22 2 4 2 32 3 4 3 42 4 4 4 52 5 4 5 62 6 4 6 72 7 4 7 82 8 4 8 92 9 4 9 10 30 50 11 31 51 12 32 52 13 33 53 14 34 54 15 35 55

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 1669R9 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669 Revision No. 9: Jun 28/2013 Page 5 of 10

TURBOPROP ENGINE

COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

3. Accomplishment Instructions (Cont’d) TABLE 1, Compressor Turbine Blades Serial Numbers (Cont’d) Blade Position Serial No. Blade Position Serial No. Blade Position Serial No.

16 36 56 17 37 57 18 38 58 19 39 20 40 Engine Serial:

C.T . Disk S/N:

CT Blades P/N B. For engines at HSI (Part B):

NOTE: This inspection is not required if the blades have been replaced with Post-SB1669 blades in accordance with Part C.

(1) Submit a two-CT blade sample for metallurgical evaluation at an overhaul facility (Ref. Pratt & Whitney Standard Practices Manual PN 585005) (Ref. P&WC SB No. 1703).

(2) If the metallurgical evaluation is not acceptable, replace the complete set of CT blades with Post-SB1669 blades in accordance with Part C.

(3) Write accomplishment of P&WC S.B. No. 1669 Part B in the applicable engine module log book.

C. For the CT blades replacement of (Part C):

(1) Remove the CT Blades P/N 3039901 or P/N 3102401-01 or 3045741-01 and discard. Refer to the applicable maintenance or overhaul manual instructions.

(2) For the Disk Balancing Assy-Compressor Turbine reidentify as follows:

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 1669R9 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669 Revision No. 9: Jun 28/2013 Page 6 of 10

TURBOPROP ENGINE

COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

3. Accomplishment Instructions (Cont’d) CAUTION: MAKE SURE THAT THE REMAINING ELECTROLYTE (ETCH

SOLUTION) IS FULLY NEUTRAL AFTER YOU WRITE ON THE PART . ELECTROLYTE CAN CAUSE CORROSION ON THE PART .

(a) Put a line across the old part number. Use the electrolyte etch procedure,

0.002 in. (0.05 mm) deep maximum, and write the new part number in the same area.

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 1669R9 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669 Revision No. 9: Jun 28/2013 Page 7 of 10

TURBOPROP ENGINE

COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF

3. Accomplishment Instructions (Cont’d)

(3) Implement conical grinding of the new CT blades per the applicable overhaul manual instructions with the differences that follows:

(a) Incorporate 0°43’ taper (Ref Fig. 1).

(b) If necessary replace the segments to get the correct Fit and Clearance No. 318. Refer to the applicable maintenance or overhaul manual instructions.

(4) Install the parts listed under New P/N in Para. 2.C., Material Information. Refer to the applicable maintenance or overhaul manual instructions.

NOTE: Record the CT Blades Serial Numbers (Ref. T able 1)

(5) Write accomplishment of P&WC S.B. No. 1669 Part C in the applicable engine module log book.

D. For Disk Balancing Assy-Compressor Turbine replacement:

(1) Remove the Disk Balancing Assy-Compressor Turbine in accordance with the Maintenance Manual or Overhaul Manual instructions.

(2) Write accomplishment of P&WC S.B. No. 1669 Part C in the applicable engine module log book.

4. Appendix A. Refer to the Fits and Clearances Fig. No 2.

TABLE 2, CT Disk - Fits and Clearances No. 509 Dim. for Ref.

inches (mm) Limits inches (mm) REF .

NO. IFR Name Min. Max. Min. Max. Replace Post-SB1669 509 Turbine Rotor Diameter (Green Run) 8.526 8.536

(216.56) (216.81) 509 Turbine Rotor Diameter (Overhaul) 8.496

(215.80)

PRATT & WHITNEY CANADA

SERVICE BULLETIN P&WC S.B. No. 1669R9 P&WC Proprietary Information. Subject to the restrictions on the back of the locator The export control classification with respect to this document is contained on the back of the locator.Jul 22/2008 PT6A-72-1669 Revision No. 9: Jun 28/2013 Page 8 of 10

TURBOPROP ENGINE

COMPRESSOR TURBINE BLADES - INSPECTION/REPLACEMENT OF