Service bulletin · Pratt & Whitney

Revision 2U.S. DOT/FAA - PW4G-112-A72-330R2 · 62 pages · 4.4 MB

© Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2013-0072; AD 2013-15-09, 2014-23-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2013-0072 (document 0027) · AD 2013-15-09, AD 2014-23-01

Manufacturer
Pratt & Whitney
Type
Alert Service Bulletin
Number
PW4G-112-A72-330
Latest revision known
PW4G-112-A72-330, Revision 2, dated July 11, 2013

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 2

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 62Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2013-0072; AD 2013-15-09, 2014-23-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '53e37ae23da548f0fafb90481227ac9e7bf39e368876ac9db0e68c373d5dd9c5'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

ALERT SER VICE

BULLETIN

REVISION NOTICE ENGINE — AIR SEAL

ASSEMBL Y , 2ND ST AGE HIGH

PRESSURE

TURBINE (HPT) —

INSPECTION OF THE SEAL FOR CRACKS T urbojet Engine Service Bulletin No.

PW4G-1 12-A72-330 Revision No.

2 dated July 1 1, 2013 .

R e v i s i o n H i s t o r y Original Issue December 3, 2012 Revision 1 dated February 14, 2013 Revision 2 dated July 1 1, 2013 R e a s o n f o r t h e R e v i s i o n T o replace NDIP-1 137, Revision B with NDIP-1 137, Revision C dated June 19, 2013.

The List of Required T ools in the Necessary T ools section was updated.

The T raining and Certification for the inspection personnel is found in NDIP-1

137.

The same information was removed from the Accomplishment Instructions because it is not necessary to state it again.

The Accomplishment Instructions step “One isolated spike of greater than

1.2 volts after a 2nd EC inspection is performed would be considered acceptable to continue in service if this Service Bulletin inspection is performed on a reduced interval of 600 cycles.”

was changed to “One isolated spike of greater than

1.2 volts after a 2nd EC inspection is performed would be considered acceptable to continue in service if this Service Bulletin inspection is performed on a reduced interval of 600 cycles.

During that next 600 cycle interval if there are no isolated spikes of greater than

1.2 volts for two EC inspections the engine could return to the 1200 cycle inspection interval.”

More HPT stage 2 air seal OD cavity surface inspection criteria was added in the Accomplishment Instructions.

E f f e c t o f R e v i s i o n o n P r i o r C o m p l i a n c e None.

T h i s i s a C o m p l e t e R e v i s i o n ( N o t A p p l i c a b l e t o t h e S G M L v e r s i o n ) The contents are in accordance with the list of ef fective pages.

All pages have the current revision number .

T echnical changes are marked with black bars.

N o n - D e s t r u c t i v e I n s p e c t i o n P r o c e d u r e s NDIP-1 137, Revision C dated June 19, 2013 is attached.

Please discard the previously issued copy .

M O D E L A P P L I C A T I O N PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, PW4090-3 B U L L E T I N I S S U E S E Q U E N C E PW4G-1 12 Series A72-330 P & W D i s t r i b u t i o n C o d e 2642 PW4G-1 12-A72-330 Page 1 of 2 Published in United States of America Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

P a g e R e v i s i o n N o .

D a t e 1 thru 32 2 July 1 1/13 A copy of this Revision Notice and any future revision notices must be filed as a permanent record with your copy of the subject bulletin.

PW4G-1 12-A72-330 Page 2 Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

ALERT SER VICE

BULLETIN ENGINE — AIR SEAL

ASSEMBL Y , 2ND ST AGE HIGH

PRESSURE

TURBINE (HPT) —

INSPECTION OF THE SEAL FOR CRACKS M O D E L A P P L I C A T I O N PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, PW4090-3 B U L L E T I N I S S U E S E Q U E N C E PW4G-1 12 Series A72-330 A T A N U M B E R 72-52-00 U T C / P & W P R O P R I E T A R Y I N F O R M A T I O N This document is the property of United T echnologies Corporation — Pratt & Whitney (UTC/P&W).

Y ou may not possess, use, copy or disclose this document or any information in it, for any purpose, including without limitation to design, manufacture, or repair parts, or obtain F AA or other government approval to do so, without UTC/P&W’ s express written permission.

Neither receipt nor possession of this document alone, from any source, constitutes such permission.

Possession, use, copying or disclosure by anyone without UTC/P&W’ s express written permission is not authorized and may result in criminal and/or civil liability .

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

C o m p l i a n c e C a t e g o r y 3 P & W D i s t r i b u t i o n C o d e 2642 l December 3/12 PW4G-1 12-A72-330

REVISION NO.

2 - July 1 1/13 Page 1 of 32 Published in United States of America

S u m m a r y The function of this Alert Service Bulletin is to provide a Non-Destructive Inspection Procedure (Reference 16, NDIP-1

137) for an Eddy Current Inspection (ECI) of the Air Seal Assembly in the 2nd Stage High Pressure T urbine (HPT), PN 54L041.

This inspection is to find cracks in the forward Outer Diameter (OD) radii.

See Reference 16, NDIP-1 137, Figure 1 for the inspection area.

This inspection will need to be done again until a new Service Bulletin is released that supplies a new design air seal.

P l a n n i n g I n f o r m a t i o n E f f e c t i v i t y D a t a E n g i n e M o d e l s A p p l i c a b l e PW4074, PW4077 Engine Serial Nos.

— All engines that have a 2nd Stage HPT Air Seal, PN 54L041 installed (Post Reference 13, Service Bulletin No.

PW4G-1 12-72-271).

PW4074D, PW4077D, PW4084D, PW4090, PW4090-3 Engine Serial Nos.

— All engines that have a 2nd Stage HPT Air Seal, PN 54L041 installed (Post Reference 13, Service Bulletin No.

PW4G-1 12-72-271).

C o n c u r r e n t R e q u i r e m e n t s There are no concurrent requirements.

R e a s o n

1.

Problem:

Cracks are starting, and increasing in size, in the 2nd stage HPT Air Seal, PN 54L041, at the forward OD area of the part.

The cracks can cause an engine event.

2.

Cause:

An investigation has determined that loading on the forward OD flange can cause cracks on the OD radius of the HPT 2nd stage air seal.

3.

Solution:

Do an Eddy Current Inspection of the 2nd Stage air seal to find cracks.

D e s c r i p t i o n Inspect the 2nd Stage HPT Air Seal, PN 54L041, to find cracks.

See Figure

1.

C o m p l i a n c e Category 3 Do this Alert Service Bulletin as follows:

PN 54L041 Air Seals that have accumulated less than or equal to 1,200 total cycles since new , when this Alert Service Bulletin is released, must be inspected within 2,200 T otal Cycles (TC) since new .

Air Seals that have accumulated more than 1,200 total cycles since new , when this Alert Service Bulletin is released, must be inspected within 1,000 cycles of Alert Service Bulletin release.

Once the inspection is accomplished, it must be repeated every 1,200 cycles until the engine is removed.

This information is also shown in the table below .

If a piece part air seal is in the shop after the of release of this Alert Service Bulletin, and is inspected using Fluorescent Penetrant Inspection (FPI) per the requirements in Reference 4, CIR Manual, and shows no crack indications, the part will require an Eddy Current Inspection within 1,200 cycles following that piece part FPI.

l December 3/12 PW4G-1 12-A72-330

REVISION NO.

2 - July 1 1/13 Page 2

UTC/P&W

PROPRIET AR Y

INFORMA TION Subject to the restrictions on the cover or first page.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

A i r S e a l I n s p e c t i o n I n t e r v a l s Engine Model T otal Part Cycles Since New (TC) Initial Inspection Threshold Cycles Subsequent Inspection Cycles TC ≤ 1200 2,200 1,200 TC > 1200 1,000 1,200 PW4074, PW4077, PW4074D, PW4077D, PW4084D, PW4090, PW4090-3 TC > 1200 and Air Seal receives in-shop FPI per Reference 4, CIR Manual 1,200 1,200 C A U T I O N :

CUMULA TIVE T OT AL AIR SEAL CYCLES MUST NOT EXCEED

REFERENCE 5 OR 6, ENGINE

MANUAL,

CHAPTER 5 LIFE.

IF THE

CHAPTER 5 LIFE CYCLE IS

EXCEEDED, THE P AR T IS NOT

AUTHORIZED FOR USE.

A p p r o v a l D a t a The times between inspections specified in Compliance and the inspection procedures specified in the Accomplishment Instructions agree with the applicable Federal A viation Regulations and are F AA-Approved for the engine model(s) given.

M a n p o w e r The estimate of man-hours of labor directly necessary to do the intent of this Alert Service Bulletin are as follows:

1.

Open the cowl doors .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

1.0

2.

Remove the parts to gain access to the HPT turbine exhaust case manifold port .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

0.5

3.

Do Reference 16, NDIP-1 137 Eddy Current Inspection .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

2.0

4.

Install the parts that were removed for access .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

0.5

5.

Close the cowl doors .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

1.0

6.

T otal Necessary Man-hours .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

5.0 W e i g h t D a t a No Change.

E l e c t r i c a l L o a d D a t a Not Applicable.

S o f t w a r e A c c o m p l i s h m e n t S u m m a r y Not Applicable.

R e f e r e n c e s

1.

T urbojet Engine Standard Practices Manual, Part No.

585005.

l December 3/12 PW4G-1 12-A72-330

REVISION NO.

2 - July 1 1/13 Page 3

UTC/P&W

PROPRIET AR Y

INFORMA TION Subject to the restrictions on the cover or first page.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

2.

PW4074, PW4077 T urbofan Engines, Illustrated Parts Catalog, Part No.

51A346.

3.

PW4074D, PW4077D, PW4084D, PW4090, PW4090-3, PW4090D, PW4098 T urbofan Engines, Illustrated Parts Catalog, Part No.

51A742.

4.

PW4000 Series 1 12 Inch PW4074, PW4077, PW4077D, PW4084D, PW4090, PW4098 T urbofan Engines, Engine Cleaning, Inspection And Repair (CIR) Manual, Part No.

51A750.

5.

PW4074, PW4077 T urbofan Engines, Engine Manual, Part No.

51A345.

6.

PW4074D, PW4077D, PW4084D, PW4090, PW4090-3, PW4090D, PW4098 T urbofan Engines, Engine Manual, Part No.

51A751.

7.

Boeing 777 Aircraft Maintenance Manual (AMM).

8.

Service Bulletin No.

PW4G-1 12-72-77;

Engine — Seal Assembly , Second Stage HPT Air — Replacement Or Modification Of;

The Air Seal Assembly For Improved Durability .

Issue Sequence 72-77, PW4G-1 12 Series.

9.

Alert Service Bulletin No.

PW4G-1 12-A72-172;

Engine — Seal Assembly , Air , 2nd Stage High Pressure T urbine (HPT) — Borescope Inspection For Cracks And Cycle Limit Reduction.

Issue Sequence 72-172, PW4G-1 12 Series.

10.

Alert Service Bulletin No.

PW4G-1 12-A72-197;

Engine — Seal Assembly , Air , 2nd Stage High Pressure T urbine (HPT) — Borescope Inspection For Cracks And Cycle Limit Reduction.

Issue Sequence 72-197, PW4G-1 12 Series.

1.

Alert Service Bulletin No.

PW4G-1 12-A72-222;

Engine — Air Seal Assembly , 2nd Stage High Pressure T urbine (HPT) — Borescope Inspection For Cracks.

Issue Sequence 72-222, PW4G-1 12 Series.

12.

Alert Service Bulletin No.

PW4G-1 12-A72-233;

Engine — Air Seal Assembly , 2nd Stage High Pressure T urbine (HPT) — Inspection For Cracks And Cycle Limit Reduction.

Issue Sequence 72-233, PW4G-1 12 Series.

13.

Service Bulletin No.

PW4G-1 12-72-271;

Engine — Seal Assembly , 2nd Stage High Pressure T urbine (HPT) Air— Replace The Seal Assembly And Related Parts For Improved Durability .

Issue Sequence 72-271, PW4G-1 12 Series.

14.

Service Bulletin No.

PW4G-1 12-75-30;

Air — Metering Orifice Plate And Seal Assemblies — Replacement Of With Gaskets.

Issue Sequence 72-30 PW4G-1 12 Series.

15.

Service Bulletin No.

PW4G-1 12-72-84;

Engine — T urbine V ane And Blade Modulated Cooling Air System — Removal Of, T o Provide A W eight Saving.

Issue Sequence 72-84 PW4G-1 12 Series.

16.

Non-Destructive Inspection Procedure, NDIP-1 137, PW4000-1 12” 2nd Stage HPT Air Seal Forward Outer Diameter Eddy Current Inspection (On-Wing) N O T E :

References

8.

through

15.

are shown to help find configurations in relation to this bulletin.

P u b l i c a t i o n s C h a n g e d See the Material Information Part Number Instruction — Disposition codes for cleaning, inspection and repair compatibility between the new and old part number(s).

PW4074, PW4077 T urbofan Engines, Illustrated Parts Catalog, Part No.

51A346.

72-52-00, Figure 1 l December 3/12 PW4G-1 12-A72-330

REVISION NO.

2 - July 1 1/13 Page 4

UTC/P&W

PROPRIET AR Y

INFORMA TION Subject to the restrictions on the cover or first page.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

75-25-00, Figure 2, 8 and 9 PW4074D, PW4077D, PW4084D, PW4090, PW4090-3, PW4090D, PW4098 T urbofan Engines, Illustrated Parts Catalog, Part No.

51A742.

72-52-00, Figure 1 75-25-00, Figure 2 and 9 I n t e r c h a n g e a b i l i t y Not Applicable.

I n f o r m a t i o n i n t h e A p p e n d i x Alternate Accomplishment Instructions (No) Progression Charts (Y es) Added Data (Y es) Revision to T able of Limits (No) Inspection Procedures (Y es) l December 3/12 PW4G-1 12-A72-330

REVISION NO.

2 - July 1 1/13 Page 5

UTC/P&W

PROPRIET AR Y

INFORMA TION Subject to the restrictions on the cover or first page.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

M a t e r i a l I n f o r m a t i o n M a t e r i a l — C o s t a n d A v a i l a b i l i t y

1.

The estimated price of new material to do this Alert Service Bulletin depends on which parts are replaced.

2.

There are tool kits, number PW A 107958, and Machida Engine Rotator Kit, and Machida V ideo Scope Kit, to do this Alert Service Bulletin.

Contact your Pratt & Whitney T ool Support Services sales manager directly , or by e-mail to pwtools@pw .utc.com for assistance with new PW A tools, kits, calibrations, and repairs.

3.

Part availability information is provided in material data Instructions — Disposition.

I n d u s t r y S u p p o r t P r o g r a m Not Applicable.

T h e m a t e r i a l d a t a t h a t f o l l o w s i s f o r e a c h e n g i n e .

N O T E :

It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Catalog.

Because there are many dif ferent configurations used, it is frequently necessary to show more than one group of parts.

When this occurs, parts that are interchangeable are shown line-by-line only , unless this is shown dif ferently .

C A U T I O N :

THE

FOLLOWING MA TERIAL DA T A T

ABLE(S) ARE

ORGANIZED BY

ILLUSTRA TED P AR TS CA T ALOG.

ALL P AR TS IN THE T

ABLE(S) MA Y OR MA Y NOT BE

APPLICABLE T O ALL THE ENGINE MODELS SHOWN IN THE T ABLE HEADING.

YOU MUST REFER T O THE

APPROPRIA TE

ILLUSTRA TED P AR TS CA T ALOG FOR ENGINE MODEL

APPLICABILITY USING THE OLD P AR T NUMBER (PN) AND CA T ALOG

SEQUENCE NUMBER.

F AILURE T O INST ALL THE P AR T(S) IN THE

CORRECT ENGINE MODEL MA Y RESUL T IN A

CONFIGURA TION THA T IS NOT F AA APPROVED.

T h e m a t e r i a l d a t a t h a t f o l l o w s i s f o r e a c h e n g i n e .

F o r P W 4 0 7 4 , P W 4 0 7 7 E n g i n e s :

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 389,400.00 SEAL ASSY — AIR, HPT , 2STG 54L041 (72-52-00-1-160 B)

(4)(C)(X) AR

68.60 GASKET OPTION ST1 142-032 (75-25-00-9-80) (75-25-00-9-150) (C)(E)(O1) AR

61.20 GASKET OPTION ST1 141-60 (75-25-00-9-130) (C)(E1)(O2) AR

196.30 GASKET —

SPRING, TURB CLG AIR 55T843 (A0946) (75-25-00-8-40) (C)(E1) (V) AR

74.60 BOL T MS9716-10 (75-25-00-9-140 B) (C)(E2) l December 3/12 PW4G-1 12-A72-330

REVISION NO.

2 - July 1 1/13 Page 6

UTC/P&W

PROPRIET AR Y

INFORMA TION Subject to the restrictions on the cover or first page.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition AR

49.70 BOL T MS9716-05 (75-25-00-9-90) (75-25-00-9-160) (C)(E2) AR

20.20 BOL T ST2601-10 (75-25-00-9-20 A) (C)(E2) AR

296.20 BOL T ST2601-16 (75-25-00-9-25 A) (C)(E2) AR

63.80 GASKET OPTION ST2422-039 (75-25-00-9-10) (C)(E1)(O3) AR

45.50 BOL T — TCA MS9715-08 (75-25-00-2-20) (C)(E2) 1

317.80 GASKET OPTION ST1 141-03 (75-25-00-2-1) (C)(E)(O4) T h e m a t e r i a l d a t a t h a t f o l l o w s i s f o r e a c h e n g i n e .

F o r P W 4 0 7 4 D , P W 4 0 7 7 D , P W 4 0 8 4 D , P W 4 0 9 0 , P W 4 0 9 0 - 3 E n g i n e s :

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 389,400.00 SEAL ASSY — AIR, HPT , 2STG 54L041 (72-52-00-1-160 B)

(4)(C)(X) 1

68.60 GASKET OPTION ST1 142-032 (75-25-00-9-146) (C)(E)(O1) AR

61.20 GASKET OPTION ST1 141-60 (75-25-00-9-130) (C)(E)(O2) AR

74.60 BOL T MS9716-10 (75-25-00-9-140 B) (C)(E2) AR

49.70 BOL T MS9716-05 (75-25-00-9-90) (75-25-00-9-160) (C)(E2) AR

20.20 BOL T ST2601-10 (75-25-00-9-20 A) (C)(E2) AR

296.20 BOL T ST2601-16 (75-25-00-9-25 A) (C)(E2) AR

63.80 GASKET OPTION ST2422-039 (75-25-00-9-10) (C)(E1)(O3) AR

45.50 BOL T — TCA MS9715-08 (75-25-00-2-20) (C)(E2) l December 3/12 PW4G-1 12-A72-330

REVISION NO.

2 - July 1 1/13 Page 7

UTC/P&W

PROPRIET AR Y

INFORMA TION Subject to the restrictions on the cover or first page.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1

317.80 GASKET OPTION ST1 141-03 (75-25-00-2-1) (C)(E)(O4) 2

434.80 GASKET — SPRING 50U285 (72-25-00-9-145) (C)(E) M o d i fi c a t i o n a n d S p a r e s I n f o r m a t i o n Estimated part prices are provided when they are available at time of publication.

The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation.

An asterisk (*) is shown where part pricing information was unavailable.

In either case, contact Pratt & Whitney Spares Management & Logistics for firm quotations.

Parts Modification Conditions

(4) Do an inspection as specified in the Accomplishment Instructions.

Spare Parts A vailability (C) The old part will continue to be supplied.

(E) The old part is an expendable item that is necessary to do this bulletin.

(E1) The old part is an expendable item that may be necessary to do this bulletin depending on which parts are removed from the engine.

(E2) The old part is a bolt that can break when it is removed from the engine.

It may be necessary to replace it.

(O1) Gasket Option, PN ST1 142-032, consists of a gasket, PN ST1 1 12-032 (P14U51-0039-02 PerkinElmer Inc.

part number) or PN ST1 122-032.

(O2) Gasket Option, PN ST1 141-60, consists of a gasket PN P13U51-0049-2 (PerkinElmer Inc.

part number) or PN ST1 121-60.

(O3) Gasket Option, PN ST2422-039, consists of a gasket PN P14U5N0046-2 (PerkinElmer Inc.

part number) and ST2412-039.

(O4) Gasket Option, PN ST1 141-03, consists of a gasket PN ST1 1 1 1-03 (P13U51-0004-2 PerkinElmer Inc.

part number) and ST1 121-03.

(V) This is the PerkinElmer Inc.

part number .

(X) See Reference 2 or 3, Illustrated Parts Catalog for applicable replacement parts.

l December 3/12 PW4G-1 12-A72-330

REVISION NO.

2 - July 1 1/13 Page 8

UTC/P&W

PROPRIET AR Y

INFORMA TION Subject to the restrictions on the cover or first page.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

V endor Services or Special Components/Materials V e n d o r S e r v i c e s o r S p e c i a l C o m p o n e n t s / M a t e r i a l s P&W Designation V endor Designation Name V endor Name & Address 55T843 A0946 GASKET —

SPRING, TURB CLG AIR ST2402-039 P14U5N0046-2 GASKET ST1 1 12-032 P14U51-0039-02 GASKET ST1 1 1 1-60 P13U51-0049-02 GASKET ST1 1 1 1-03 P13U51-0004-2 GASKET

PERKINELMER INC.

1 1642 OLD BAL TIMORE PIKE BEL

TSVILLE, MD 20705-1210 USA V endor Manufacturer ’ s Code:

15284 See Illustrated Parts Catalog V endor Manufacturer ’ s Code List N O T E :

EXCEPT FOR WORK OR

SUPPLIES T O BE

PERFORMED OR

FURNISHED BY PRA TT &

WHITNEY , IT IS

UNDERST OOD THA T PRA TT &

WHITNEY DOES NOT

ENDORSE THE WORK

PERFORMED BY THE COMP ANY OR COMP ANIES NAMED HEREIN OR ANY OTHER COMP ANY AND DOES NOT ACCEPT

RESPONSIBILITY T O ANY DEGREE FOR THE

SELECTION OF SUCH COMP ANY OR COMP ANIES FOR THE

PERFORMANCE OF ANY WORK OR

PROCUREMENT OF SUPPLIES.

M a t e r i a l D a t a f o r E a c h S p a r e E n g i n e The material for each spare engine is as stated in the preceding material information section.

R e i d e n t i fi e d P a r t s Not Applicable.

N e c e s s a r y T o o l s The following tools are required to accomplish this Alert Service Bulletin.

Contact your Pratt & Whitney Customer Representative for information regarding acquiring these tools.

L i s t o f R e q u i r e d T o o l s KIT NUMBER

NOMENCLA TURE UNITS PER ENGINE PW A 107958* EDDY

CURRENT

INSPECTION Kit 1 N/A*

MACHIDA ENGINE ROT A T OR Kit Model MA-TT -70 with Adapters 1 N/A*

MACHIDA VIDEO SCOPE Kit Model VSC-2-86 with Monitor 1 * Detail tool listing is found in NDIP-1 137 l December 3/12 PW4G-1 12-A72-330

REVISION NO.

2 - July 1 1/13 Page 9

UTC/P&W

PROPRIET AR Y

INFORMA TION Subject to the restrictions on the cover or first page.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).

O t h e r M a t e r i a l I n f o r m a t i o n D a t a Not Applicable.

l December 3/12 PW4G-1 12-A72-330

REVISION NO.

2 - July 1 1/13 Page 10

UTC/P&W

PROPRIET AR Y

INFORMA TION Subject to the restrictions on the cover or first page.

Not subject to the EAR per 15 C.F .R.

Chapter 1, Part

734.3(b)(3).