On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2023-1638; AD 2023-22-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
© Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2017-0719; AD 2018-02-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Pratt & Whitney
- Type
- Alert Service Bulletin
- Number
- PW4G-112-A72-347
- Latest revision known
- PW4G-112-A72-347, Revision 4, dated September 1, 2022
- Copies
- 2 files of 2 revisions
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 2 proposed ADs.
Text · 27Partly OCR
Revision 4, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © Pratt & Whitney. Filed by the FAA in regulations.gov docket FAA-2023-1638; AD 2023-22-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '826932ea387b53c8f136d4586eafa67064dc2d1ee286a6649840916c1bff3f3d' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '826932ea387b53c8f136d4586eafa67064dc2d1ee286a6649840916c1bff3f3d' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
██ ██ ALERT SER VICE
BULLETIN
REVISION NOTICE ENGINE — CASE
ASSEMBL Y ,
DIFFUSER OUTER —
REPETITIVE
INSPECTION OF BOSSES FOR CRACKS T urbojet Engine Alert Service Bulletin No.
PW4G-1 12-A72-347 Revision No 4 dated September 1, 2022 .
Revision History Original Issue March 31, 2017 Revision 1 dated October 25, 2017 Revision 2 dated March 4, 2019 Revision 3 dated September 13, 2019 Revision 4 dated September 1, 2022 Reason for the Revision T o update the total cycle requirements and inspection guidelines in the Compliance Section and T able
1.
T o update this Service Bulletin with changed company name from “United T echnologies Corporation” to “Raytheon T echnologies Corporation” as necessary .
T o update the graphic configuration control number in Figure
2.
T o make editorial changes that do not af fect the technical content of this Service Bulletin.
Ef fect of Revision on Prior Compliance None.
This is a Complete Revision (Not Applicable to the SGML version) The contents are in accordance with the list of ef fective pages.
All pages have the current revision number .
T echnical changes are marked with black bars.
MODEL
APPLICA TION PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, PW4090-3
BULLETIN ISSUE
SEQUENCE PW4G-1 12 Series A72-347 Page Revision No.
Date 1 thru 22 4 September 1/22 A copy of this Revision Notice and any future revision notices must be filed as a permanent record with your copy of the subject bulletin.
P&W Distribution Code 2641 PW4G-1 12-A72-347 Page 1 of 1 Published in United States of America Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
██ ██
██ ██ ALERT SER VICE
BULLETIN ENGINE — CASE
ASSEMBL Y ,
DIFFUSER OUTER —
REPETITIVE
INSPECTION OF BOSSES FOR CRACKS MODEL
APPLICA TION PW4074, PW4074D, PW4077, PW4077D, PW4084D, PW4090, PW4090-3
BULLETIN ISSUE
SEQUENCE PW4G-1 12 Series A72-347 A T A NUMBER 72-41-00 R TX/P&W
PROPRIET AR Y
INFORMA TION This document is the property of Raytheon T echnologies Corporation — Pratt & Whitney (R TX/P&W).
Y ou may not possess, use, copy or disclose this document or any information in it, for any purpose, including without limitation to design, manufacture, or repair parts, or obtain F AA or other government approval to do so, without R TX/P&W's express written permission.
Neither receipt nor possession of this document alone, from any source, constitutes such permission.
Possession, use, copying or disclosure by anyone without R TX/P&W's express written permission is not authorized and may result in criminal and/or civil liability .
Export Classification:
Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
F AA Airworthiness Directive Directive No.
2018-02-10 Compliance Category 3, 5 P&W Distribution Code 2641 l March 31/17 PW4G-1 12-A72-347
REVISION NO.
4 - September 1/22 Page 1 of 22 Published in United States of America
Summary The purpose of this Alert Service Bulletin is to provide a fleet management plan, inspection procedure, and inspection requirements to perform an on-wing, of f-wing, and module level Fluorescent Penetrant Inspection (FPI) on bosses of the outer dif fuser case.
Cracking has been found on three outer dif fuser case boss near the TT3 probe boss.
Pratt & Whitney has also analytically identified additional bosses on the outer dif fuser case that have the potential for developing a crack.
A crack could propagate to case rupture.
Planning Information Ef fectivity Data Engine Models Applicable PW4074, PW4077, PW4074D, PW4077D, PW4084D, PW4090, PW4090-3 Engine Serial No.
— All engines Concurrent Requirements There are no concurrent requirements.
Reason
1.
Problem:
Seven outer dif fuser cases were found with cracking during FPI.
Pratt & Whitney has also analytically identified additional bosses on the outer dif fuser cases that have potential for developing a crack.
Cracks could propagate to case rupture.
2.
Cause:
The root cause is still being investigated at this time.
3.
Solution:
Perform a repetitive FPI on certain bosses of outer dif fuser case on fully assembled engine (on-wing and of f-wing) and disassembled engines (module level) per fleet management plan.
This Alert Service Bulletin provides the FPI process, procedure, and timing necessary to perform this inspection.
There is no terminating action for this Alert Service Bulletin.
Description Do a repetitive FPI of some bosses of the outer dif fuser case at specified intervals.
Compliance Category 3 (Parts A and B) FOR P AR T A AND B OF
ACCOMPLISHMENT INSTRUCTIONS:
Outer dif fuser case FPI to be performed when engine is fully assembled (on-wing or of f-wing).
For any outer dif fuser case that has less than 9,200 total cycles, do a local FPI of the bosses specified prior to outer dif fuser case reaching 9,200 total cycles or within 1,000 cycles, whichever occurs later .
For any outer dif fuser case that has 9,200 total cycles, or more, since new and less than 13,000 cycles since new as of the Alert Service Bulletin issue date, do a local FPI of the bosses specified within 1,000 cycles.
For any outer dif fuser case that has 13,000 cycles or more since new , do a local FPI of the bosses specified within 50 cycles.
If total cycles of the outer dif fuser case are unknown, inspect within 50 cycles.
Repeat FPI at an interval that is not more than 2,000 cycles since last FPI.
See T able
1.
If any outer dif fuser case that has 9,200 total cycles or more since new and the specified l March 31/17 PW4G-1 12-A72-347
REVISION NO.
4 - September 1/22 Page 2
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
bosses have been FPI inspected within 2,000 cycles of the outer dif fuser case total cycles, do the inspection within 2,000 cycles of that last inspection or within 1,000 cycles of Alert Service Bulletin issue date, whichever occurs later .
See T able
1.
T able 1:
Outer dif fuser case Fluorescent Penetrant Inspection (FPI) inspection requirements for fully assembled (on-wing or of f-wing) engines Outer Dif fuser Case (ODC) T otal Cycle (TC) Perform Initial Inspection Within (Cycles) Re-Inspection Interval (Cycles) Inspection Guidelines Inspection Examples TC < 9,200 Prior to ODC reaching 9,200 TC or within 1,000 cycles, whichever comes later .
2,000 For any ODC that has less than 9,200 TC, do a local Fluorescent Penetrant Inspection (FPI) of the bosses specified before ODC reaches 9,200 TC or within 1,000 cycles of this Alert Service Bulletin issue date, whichever occurs later .
Repeat FPI at an interval that is not more than 2,000 cycles since last FPI.
If ODC has 8,200 TC or less, then do an initial inspection prior to ODC reaching 9,200 TC.
If ODC has 8,201 to 9,199 TC, then do an initial inspection within 1,000 cycles (before ODC reaches 9,201 to 10,199 TC).
Repeat FPI at an interval that is not more than 2,000 cycles since last FPI.
9,200 ≤ TC < 13,000 1,000 2,000 For any ODC that has 9,200 TC, or more, since new , do a local FPI of the bosses specified within 1,000 cycles of this Alert Service Bulletin issue date.
Repeat FPI at an interval that is not more than 2,000 cycles since last FPI.
If ODC has 9,700 TC since new , then do an initial inspection within 1,000 TC (before ODC reaches 10,700 TC).
Repeat FPI at an interval that is not more than 2,000 cycles since last FPI.
l March 31/17 PW4G-1 12-A72-347
REVISION NO.
4 - September 1/22 Page 3
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
TC ≥ 13,000 50 2000 For any ODC that has 13,000 TC, or more, since new , do a local FPI of the bosses specified within 50 cycles of this Alert Service Bulletin issue date.
Repeat FPI at an interval that is not more than 2,000 cycles since last FPI.
If ODC has 13,500 TC since new , then initial inspection needs to be done within 50 TC (before ODC reaches 13,550 TC).
Repeat FPI at an interval that is not more than 2,000 cycles since last FPI.
TC ≥ 9,200 and FPI was performed within 2,000 cycles of the ODC TC 2,000 2,000 If any ODC that has 9,200 TC or more since new and the specified bosses have been FPI’d within 2,000 cycles of the ODC TC, do the inspection within 2,000 cycles of that last inspection or within 1,000 cycles of this Alert Service Bulletin issue date, whichever occurs later .
If ODC was FPI'd at 8,700 TC, then do an initial inspection within 2,000 cycles (before ODC reaches 10,700 TC).
Repeat FPI at an interval that is not more than 2,000 cycles since last FPI.
TC = Unknown 50 2,000 If TC of the ODC are unknown, do an inspection within 50 cycles of this Alert Service Bulletin issue date.
Repeat FPI at an interval that is not more than 2,000 cycles since last FPI.
If ODC has TC that are unknown, then initial inspection needs to be done within 50 cycles of current ODC TC.
Repeat FPI at an interval that is not more than 2,000 cycles since last FPI.
l March 31/17 PW4G-1 12-A72-347
REVISION NO.
4 - September 1/22 Page 4
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Category 5 (Part C) FOR P AR T C OF
ACCOMPLISHMENT INSTRUCTIONS:
Outer dif fuser case FPI to be performed when engine is disassembled (module level).
Perform local FPI of all the bosses specified at every flange M separation.
NOTE :
Module level is defined when flange M is split.
NOTE :
Piece part FPI per Cleaning, Inspection and Repair Manual (PN 51A750), A T A 72-41-13, Inspection/Check-02 meets the requirements for the initial and repetitive inspections.
NOTE :
After module level inspection, perform subsequent FPI for assembled engines on-wing and of f-wing every 2,000 cycles.
NOTE :
See Reference 4 or 5, Engine Manual, Chapter/Section 05-10-01, for Outer Dif fuser Case Special Maintenance Requirements, T ask 05-10-01-990-007.
Approval Data The times between inspections specified in Compliance and the inspection procedures specified in the Accomplishment Instructions agree with the applicable Federal A viation Regulations and are F AA-Approved for the engine model(s) given.
Revision 3 of this Service Bulletin has been approved by the Manager , Engine Certification Of fice, ANA 140, by letter , dated September 1 1, 2019, as an Alternate Method Of Compliance (AMOC) to Airworthiness Directive (AD) 2018-02-10.
A copy of this AMOC letter is attached in the Appendix of this Service Bulletin.
Manpower The estimate of man-hours of labor directly necessary to do the on-wing FPI are as follows:
For PW4074 and PW4077 engines
1.
Necessary to Open and Close the Cowl Doors and Deactivate/Reactivate Thrust Reversers .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.0.8
2.
Necessary to Perform an FPI .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.5
3.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3.3 For PW4074D, PW4077D, PW4084D, PW4090, and PW4090-3 engines
1.
Necessary to Open and Close the Cowl Doors and Deactivate/Reactivate Thrust Reversers .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.0.8
2.
Necessary to Perform an FPI .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.0
3.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.8 The estimate of man-hours of labor directly necessary to do the of f-wing FPI are as follows:
For PW4074 and PW4077 engines
1.
Necessary to Perform an FPI .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.5
2.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2.5 l March 31/17 PW4G-1 12-A72-347
REVISION NO.
4 - September 1/22 Page 5
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
For PW4074D, PW4077D, PW4084D, PW4090, and PW4090-3 engines
1.
Necessary to Perform an FPI .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.0
2.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4.0 The estimate of man-hours of labor directly necessary to do the module level FPI is as follows:
For PW4074, PW4077, PW4074D, PW4077D, PW4084D, PW4090, and PW4090-3 engines
1.
Necessary to Perform an FPI .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8.0
2.
T otal Necessary Man-hours .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8.0 W eight Data No Change.
Electrical Load Data Not Applicable.
Software Accomplishment Summary Not Applicable.
References
1.
T urbojet Engine Standard Practices Manual, Part No.
585005.
2.
PW4074, PW4077 T urbofan Engines, Illustrated Parts Catalog, Part No.
51A346.
3.
PW4074D, PW4077D, PW4084D, PW4090, PW4090-3, PW4090D, PW4098 T urbofan Engines, Illustrated Parts Catalog, Part No.
51A742.
4.
PW4074, PW4077 T urbofan Engines, Engine Manual, Part No.
51A345.
5.
PW4074D, PW4077D, PW4084D, PW4090, PW4090-3, PW4090D, PW4098 T urbofan Engines, Engine Manual, Part No.
51A751.
6.
PW4000 Series 1 12 Inch PW4074, PW4077, PW4077D, PW4084D, PW4090, PW4098 T urbofan Engines, Engine Cleaning, Inspection And Repair (CIR) Manual, Part No.
51A750.
7.
Boeing 777 Aircraft Maintenance Manual.
8.
Federal A viation Administration (F AA) Airworthiness Directive;
2018-02-10.
9.
F AA Alternate Means Of Compliance letter .
Publications Changed Not Applicable.
Interchangeability Not Applicable.
l March 31/17 PW4G-1 12-A72-347
REVISION NO.
4 - September 1/22 Page 6
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Information in the Appendix Alternate Accomplishment Instructions (No) Progression Charts (No) Added Data (Y es) Revision to T able of Limits (No) Inspection Procedures (No) l March 31/17 PW4G-1 12-A72-347
REVISION NO.
4 - September 1/22 Page 7
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Material Information Material — Cost and A vailability
1.
There is no kit provided to do this Alert Service Bulletin.
2.
Part availability information is provided in material data Instructions — Disposition.
Industry Support Program Not Applicable.
The material data that follows is for each engine.
NOTE :
It is possible to use the Chapter/Section and Figure/Item reference number shown below the old part number to find the part in the Illustrated Parts Catalog.
CAUTION :
THE
FOLLOWING MA TERIAL DA T A T
ABLE(S) ARE
ORGANIZED BY
ILLUSTRA TED P AR TS CA T ALOG.
ALL P AR TS IN THE T
ABLE(S) MA Y OR MA Y NOT BE
APPLICABLE T O ALL THE ENGINE MODELS SHOWN IN THE T ABLE HEADING.
YOU MUST REFER T O THE
APPROPRIA TE
ILLUSTRA TED P AR TS CA T ALOG FOR ENGINE MODEL
APPLICABILITY USING THE OLD P AR T NUMBER (PN) AND CA T ALOG
SEQUENCE NUMBER.
F AILURE T O INST ALL THE P AR T(S) IN THE
CORRECT ENGINE MODEL MA Y RESUL T IN A
CONFIGURA TION THA T IS NOT F AA APPROVED.
The material data that follows is for each engine.
For PW4074, PW4077 Engines:
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 CASE
ASSEMBL Y —
DIFFUSER, OUTER 50J775 (72-41-00-1-1 A)
(4)(X) 1 CASE
ASSEMBL Y —
DIFFUSER, OUTER 50J775-001
(4)(X) 1 CASE
ASSEMBL Y —
DIFFUSER, OUTER 50J775-002
(4)(X) 1 CASE
ASSEMBL Y —
DIFFUSER, OUTER 50J930 (72-41-00-1-1 B)
(4)(X) l March 31/17 PW4G-1 12-A72-347
REVISION NO.
4 - September 1/22 Page 8
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 CASE
ASSEMBL Y —
DIFFUSER, OUTER 50J930-001
(4)(X) 1 CASE
ASSEMBL Y —
DIFFUSER, OUTER 50J930-002
(4)(X) The material data that follows is for each engine.
For PW4074D, PW4077D, PW4084D, PW4090, PW4090-3 Engines:
New PN Qty Estimate of Unit Price ($) Keyword Old PN Instructions — Disposition 1 CASE
ASSEMBL Y —
DIFFUSER, OUTER 50J930 (72-41-00-1-1)
(4)(X) 1 CASE
ASSEMBL Y —
DIFFUSER, OUTER 50J930-001
(4)(X) 1 CASE
ASSEMBL Y —
DIFFUSER, OUTER 50J930-002
(4)(X) Modification and Spares Information Estimated part prices are provided when they are available at time of publication.
The Estimate of Unit Price is only for planning purposes and does not constitute a firm quotation.
An asterisk (*) is shown where part pricing information was unavailable.
In either case, contact Pratt & Whitney Spares Management & Logistics for firm quotations.
Parts Modification Conditions
(4) Do an inspection as specified in the Accomplishment Instructions.
Spare Parts A vailability (X) See Reference 2 or 3, Illustrated Parts Catalog for applicable replacement parts.
V endor Services or Special Components/Materials Not Applicable.
Material Data for Each Spare Engine The material for each spare engine is as stated in the preceding material information section.
l March 31/17 PW4G-1 12-A72-347
REVISION NO.
4 - September 1/22 Page 9
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).
Reidentified Parts Not Applicable.
Necessary T ools No more Support Equipment is necessary .
Other Material Information Data Not Applicable.
l March 31/17 PW4G-1 12-A72-347
REVISION NO.
4 - September 1/22 Page 10
UTC/P&W
PROPRIET AR Y
INFORMA TION Not subject to the EAR per 15 C.F .R.
Chapter 1, Part
734.3(b)(3).