TextOCR
This text is OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '12401f06baed81174e2758e6a55f24d1a70aebf2474296df1d1a05487c2098be' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '12401f06baed81174e2758e6a55f24d1a70aebf2474296df1d1a05487c2098be' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
BINSON
HELICOPTER COMPANY 2901 Airport Drive, Torrance, California 90505 Phone (310) 539-0508 Fax (310) 539-5198 Page 1 of 2 R44 SERVICE LETTER SL-37 DATE: 18 June 2010 TO: R44 & R44 II owners, operators, and maintenance personnel SUBJECT: C016-7 Main Rotor Blades BACKGROUND: RHC has developed a new main rotor blade, p/n C016-7, which incorporates an aluminum skin for better dent protection and corrosion resistance at the blade tip. The C016-7 blade is part of the C005-12 blade & spindle assembly, and a matched pair may be installed on any fuel-injected R44 II. Installing matched C016-7 blades on carbureted R44 helicopters, however, requires verifying certain components are installed or retrofitted.
COMPLIANCE PROCEDURE:
Refer to R44 Illustrated Parts Catalog Figure 7-15B dated JUL 2008. Prior to installing p/n C016-7 main rotor blades on a carbureted R44, verify the helicopter has:
1. hydraulic flight controls. R44s with manual flight controls (electric-trim) must be upgraded to hydraulic controls; for details refer to:
www.robinsonheli.com/pdf_ i_files/r44_factory_overhaul_pricelist.pdf
2. C792-4 dual tachometer (101-102% engine rpm green arc, p/n R9602 for overhauled-exchange unit).
3. C006-5 or -6 main rotor gearbox (R9594 overhauled-exchange), or C006-3 or -4 main rotor gearbox with B900-5 modification (if modified, a separate B900-5 data plate will be adjacent to the C006 data plate).
4. lower C204-2 arm (steel, 2.52 inches long), connecting gearbox mast to lower fork assy with NAS1305-31 or NAS6605-31 bolts.
5. lower A205-7 fork assy (3.70 inches center-to-center), attached to non-rotating swashplate.
6. C017-6 swashplate, or C017-4 swashplate (R9596 overhauled-exchange).
7. upper A205-7 fork assy (3.85 inches center-to-center), attached to rotating swashplate.
(OVER)
R44 SL-37 Page 2 of 2
8. upper C204-3 arm (steel, 2.87 inches long), connecting upper fork assy to mainrotor-shaft yoke assemblies with NAS1305-31 or NAS6605-31 bolts.
9. two C203-5 yoke assemblies, on C251-2 main rotor shaft.
10.two C157-3 pitch horns, 16-hole flange (included with C005-12 blade & spindle assemblies).
Approximate Cost:
Refer to www.robinsonheli.com/public for current parts prices.