Service bulletin · Rolls-Royce Deutschland

No revision namedRB_72-J941_0 · 49 pages · 319 KB

© Rolls-Royce plc. Filed by the FAA in regulations.gov docket FAA-2020-0009, the docket of AD 2020-15-12. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2020-0009 (document 0006) · AD 2020-15-12

Type
Service Bulletin
Number
RB 72-J941

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 49

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Rolls-Royce plc. Filed by the FAA in regulations.gov docket FAA-2020-0009, the docket of AD 2020-15-12. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '5d0eb35f6ab4d6541be59316e76aee9bfdf77ce997ef2e1699c2da6ca701786a'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

This document transmits the Initial Issue of Service Bulletin TRENT1000-72-J941 and the Initial Issue of the Supplement Bulletin Initial Issue Remove Incorporate Reason for change Pages 1 to 44 of the Service Bulletin Initial Issue Supplement Initial Issue Remove Incorporate Reason for change Page 1 and 2 Initial Issue Printed in Great Britain Dec. 6/18 TRENT 1000 SERIES PROPULSION SYSTEMS SERVICE BULLETIN TRENT 1000 72−J941 Transmittal - Page 1 of 3 Date

LIST OF EFFECTIVE PAGES The effective pages to this Service Bulletin are as follows:

Page Revision Number Revision Date Bulletin 1 Dec.6/18 2 Dec.6/18 3 Dec.6/18 4 Dec.6/18 5 Dec.6/18 6 Dec.6/18 7 Dec.6/18 8 Dec.6/18 9 Dec.6/18 10 Dec.6/18 11 Dec.6/18 12 Dec.6/18 13 Dec.6/18 14 Dec.6/18 15 Dec.6/18 16 Dec.6/18 17 Dec.6/18 18 Dec.6/18 19 Dec.6/18 20 Dec.6/18 21 Dec.6/18 22 Dec.6/18 23 Dec.6/18 24 Dec.6/18 25 Dec.6/18 26 Dec.6/18 27 Dec.6/18 28 Dec.6/18 29 Dec.6/18 30 Dec.6/18 31 Dec.6/18 32 Dec.6/18 33 Dec.6/18 34 Dec.6/18 35 Dec.6/18 36 Dec.6/18 37 Dec.6/18 38 Dec.6/18 39 Dec.6/18 40 Dec.6/18 41 Dec.6/18 42 Dec.6/18 43 Dec.6/18 44 Dec.6/18 Printed in Great Britain TRENT 1000 72−J941 Transmittal - Page 2

Supplement 1 Dec.6/18 2 Dec.6/18 Printed in Great Britain TRENT 1000 72−J941 Transmittal - Page 3

1. Planning Information A. Effectivity Boeing 787 TRENT1000-A2 All Engines.

TRENT1000-C2 All Engines.

TRENT1000-D2 All Engines.

TRENT1000-E2 All Engines.

TRENT1000-G2 All Engines.

TRENT1000-H2 All Engines.

TRENT1000-J2 All Engines.

TRENT1000-K2 All Engines.

TRENT1000-L2 All Engines.

TRENT1000, M32100604 M32 Modules B. Concurrent Requirements None.

C. Reason

(1) Problem The current standards of IP compressor stage 1 and 2 rotor blades are susceptible to premature deterioration due to cracking in the blade root.

In addition, the IP compressor stages 1 to 8 rotor shaft assembly is susceptible to cracking of the stage 2 disc post.

ENGINE - IP COMPRESSOR BLADES - INTRODUCTION OF REVISED IP COMPRESSOR STAGE 1 AND 2

ROTOR BLADES FEATURING OPTIMISED MANUFACTURING AND GEOMETRY CHANGES WITH ASSOCIATED CHANGES TO BUILD AND MACHINING INSTRUCTIONS - MOD.72-J941 Printed in Great Britain TRENT 1000 72−J941 Page 1 of 44 Dec. 6/18 Dec. 6/18 TRENT 1000 SERIES

SERVICE BULLETIN

Both problems are attributed to the LP compressor blade assembly generating wakes that are felt at the front of the IP compressor as pressure disturbances. During certain flight conditions the frequency of the disturbances coincides with the natural frequencies of the blades, causing high vibration leading to deterioration of the DFL (Dry Film Lubricant) in the blade root. As the DFL wears, the increase in co-efficient of friction, combined with the high vibration, causes high steady and high alternating stresses in the blade root edge of bedding, causing crack initiation and propagation.

In some instances, the IP Compressor stage 1 to 8 rotor shaft assembly stage 2 disc post has cracked in preference to the stage 2 rotor blade.

(2) Evidence The problems have been experienced on a number of in-service engines.

(3) Substantiation The changes introduced by this Service Bulletin have been the subject of satisfactory engineering evaluation, including stress and vibration assessments and successful development engine testing.

(4) Objective Incorporation of this Service Bulletin (Modification) is designed to maintain reliability.

(5) Effect of Bulletin on:

(a) Operation Not affected.

(b) Maintenance Not affected.

(c) Overhaul Affected (see 1.L. Other Publications Affected).

(d) Repair Schemes Affected (Affected Repair Schemes will be revised to include the Part(s) introduced by this Service Bulletin).

(e) Interchangeability Affected (see 1.M. Interchangeability of Parts).

Printed in Great Britain TRENT 1000 72−J941 Page 2 Dec. 6/18 Dec. 6/18 TRENT 1000 SERIES

SERVICE BULLETIN

D. Description

(1) This Service Bulletin introduces revised IP compressor stage 1 and stage 2 rotor blades featuring manufacturing and geometry changes to the aerofoil and root sections of the blade to change the resonant frequency and minimise vibratory stresses.

The changes are:

(a) A revised IP compressor stage 1 rotor blade is introduced similar to the existing item except for:

(i) The method of manufacture is changed from precision forged to machined all over post oversize forging.

(ii) The blade aerofoil profile is revised with the introduction of a leading edge cutback at the tip region.

(iii) The blade aerofoil features such as chord length, aerofoil thickness, localised leading edge and trailing edge thickness are revised.

(iv) The root profile has been revised to rebalance the root steady stresses.

(v) The maximum blade weight limit, specified for individual blades, is tightened during manufacture to control the maximum allowable blade set weight specified for stage 1.

(vi) The natural frequency limit requirements are defined on the manufacturing detail drawing.

(b) Revised IP compressor stage 1 strap assemblies are introduced to accommodate the root geometry changes of IP compressor stage 1 rotor blades.

(c) A Revised IP compressor stage 2 rotor blade is introduced similar to the existing item except for:

(i) The method of manufacture is changed from precision forged to machined all over post oversize forging.

(ii) The blade aerofoil features such as chord length, aerofoil thickness, localised leading edge and trailing edge thickness are revised.

(iii) The root profile has been revised to rebalance the root steady stresses.

Printed in Great Britain TRENT 1000 72−J941 Page 3 Dec. 6/18 Dec. 6/18 TRENT 1000 SERIES

SERVICE BULLETIN

(iv) The maximum blade weight limit, specified for individual blades, is tightened during manufacture to control the maximum allowable blade set weight specified for stage 2.

(v) The natural frequency limit requirements are defined on the manufacturing detail drawing.

(d) A revised IP compressor blades locking and sealing build instruction is introduced to implement additional build verification checks.

(e) A revised IP compressor stages 1 to 8 blade tip machining instruction is introduced to achieve the required cold build clearances of the revised standard of stage 1 and 2 blades introduced by this Service Bulletin.

(2) This Service Bulletin is in two parts as follows:

(a) Part 1 New production and in-service applications.

(b) Part 2 Reserved for possible future use.

E. Compliance

(1) ON-WING Not applicable.

(2) IN-SHOP

RECOMMENDED It is recommended that this Service Bulletin be accomplished on engines/powerplants at M32 - IPC Module rework level of Module Check and Repair or Module Refurbishment or Module Overhaul or Engine Refurbishment or Engine Check and Repair.

F. Approval The technical content of Modification 72-J941 was approved by a representative of the European Aviation Safety Agency (EASA) on Dec. 5/18, EASA certificate No. EASA.C.10067810.

This Service Bulletin has been reviewed by Boeing and the instructions herein are certified with the applicable FAA regulations.

Printed in Great Britain TRENT 1000 72−J941 Page 4 Dec. 6/18 Dec. 6/18 TRENT 1000 SERIES

SERVICE BULLETIN

G. Manpower

(1) On-wing Not applicable.

(2) In-shop Not affected.

NOTE : The parts affected by this Service Bulletin are accessible in-shop.

H. Material Price and Availability Modification kit not required; parts supplied as single line items.

For prices and availability of future spares see supplement to this bulletin.

I. Tooling Price and Availability Special tools are not required.

J. Weight and Balance

(1) Weight Change Plus 1,63 kg (3.6 lb).

(2) Moment Arm 24 mm (0.9 in.) Forwards.

(3) Datum Power Plant Station (PPS) 3000 mm (118.11 in.).

K. References

(1) Engine Manual, 72-32-30, Disassembly and Assembly.

(2) Cleaning, Inspection and Repair Manual, 72-32-31, Inspection.

L. Other Publications Affected

(1) For effect on Illustrated Parts Catalogue (IPC) refer to 2. Material Information.

(2) Engine Manual, 72-32-30, Disassembly and Assembly.

(3) Cleaning, Inspection and Repair Manual, 72-32-32, Inspection.

Printed in Great Britain TRENT 1000 72−J941 Page 5 Dec. 6/18 Dec. 6/18 TRENT 1000 SERIES

SERVICE BULLETIN

M. Interchangeability of Parts It is essential that parts are fitted as a Service Bulletin set.

Printed in Great Britain TRENT 1000 72−J941 Page 6 Dec. 6/18 Dec. 6/18 TRENT 1000 SERIES

SERVICE BULLETIN

2. Material Information A. Parts required to accomplish this Service Bulletin:

All Engines and Modules P a r t1o fS B 72-32-32 FIG ITEM NO.

NEW PART NO.

QTY PART TITLE OLD PART NO.

INSTR DISP 01 250 KH89682 34 BLADE,STAGE 1-ROTOR-IP

COMPRESSOR KH25729 (1) 01 275 KH85811 25 STRAP,ASSY STAGE 1-IP

COMPRESSOR FW56769 (1) 01 285 KH85811 9AR STRAP,ASSY STAGE 1-IP

COMPRESSOR (NOMINAL) FW56769 (1)(2) 01 295 KH85287 9AR STRAP,ASSY STAGE 1

BALANCE-BALANCED-IP

COMPRESSOR FW56771 (1)(2) 02 250 KH87131 49 BLADE,STAGE 2-ROTOR-IP

COMPRESSOR KH25730 (1) B. Parts to be reworked:

None.

C. New production parts:

The following parts will be made available as future spares in addition to those listed under A:

All Engines and Modules P a r t1o fS B 72-32-32 FIG ITEM NO.

NEW PART NO.

QTY PART TITLE OLD PART NO.

INSTR DISP 01 280 KH85812 25 STRAP,STAGE 1-IP COMPRESSOR FW56770 (3) 01 290 KH85812 9AR STRAP,STAGE 1-IP COMPRESSOR (NOMINAL) FW56770 (4) 01 300 KH85293 9AR STRAP, BALANCE STAGE 1-BALANCED-IP COMPRESSOR FW56772 (5) Printed in Great Britain TRENT 1000 72−J941 Page 7 Dec. 6/18 Dec. 6/18 TRENT 1000 SERIES

SERVICE BULLETIN

D. Instruction disposition codes:

(1) Not Interchangeable. The new part must not be replaced by the old part in isolation, and the old part must not be replaced by the new part in isolation.

(2) Select as required.

(3) Part of IP compressor stage 1 strap assembly at ATA chapter reference 72-32-32, fig/item 01275.

(4) Part of IP compressor stage 1 strap assembly at ATA chapter reference 72-32-32, fig/item 01285.

(5) Part of IP compressor stage 1 balance strap assembly at ATA chapter reference 72-32-32, fig/item 01295.

Printed in Great Britain TRENT 1000 72−J941 Page 8 Dec. 6/18 Dec. 6/18 TRENT 1000 SERIES

SERVICE BULLETIN

3. Accomplishment Instructions A. The revised IP compressor stage 1 blades and associated strap assemblies, the revised stage 2 blades and the effect of the revised IP compressor assembly instructions introduced by this Service Bulletin are interchangeable with the existing parts only as a Service Bulletin set (see 1.M. Interchangeability of Parts):

(1) Disassemble the existing IP compressor rotor assembly in accordance with Part B of these Accomplishment Instructions.

(2) Inspect the IP compressor rotor shaft assembly in accordance with Part C of these Accomplishment Instructions.

(3) Assemble the IP compressor rotor assembly in accordance with Part D of these Accomplishment Instructions.

B. Disassemble the existing IP compressor rotor shaft assembly in accordance with current overhaul procedures (Engine Manual, 72-32-30, Disassembly).

C. Inspect the IP compressor rotor shaft assembly (72-32-31, 01-450), in accordance with current overhaul procedures (CIR, 72-32-31, Inspection).

D. Assemble the revised IP compressor rotor assembly in accordance with current overhaul procedures (Engine Manual, 72-32-30, Assembly) except for the items that follow:

(1) SUBTASK 72-32-30-440-183.

Find the installation sequence of the stage 1 thru 6 blades. Refer to Fig.1:

(a) Weigh the 34 stage 1 blades (72-32-32, 01-250):

(i) Weigh each stage 1 blade and make a record of the individual blade weight:

(1) Remove all stage 1 blades that weigh more than 461,8 g (16.29 oz) from the set and replace with blades lighter than 461,8 g

(16.29 oz).

(2) Make a record of the each replacement stage 1 blade weight.

(ii) Make a record of the total weight of the stage 1 blades:

(1) If the total weight of the stage 1 blades is more than 15699,5 g (553.78 oz), remove the heaviest blades from the set.

Printed in Great Britain TRENT 1000 72−J941 Page 9 Dec. 6/18 Dec. 6/18 TRENT 1000 SERIES

SERVICE BULLETIN