Service bulletin · Rolls-Royce Deutschland

Revision 6RRD Non-Modification Service Bulletin 1000 72-AK316 Rev 6 · 16 pages · 3.2 MB

© Rolls-Royce plc. Filed by the FAA in regulations.gov docket FAA-2026-4655, the docket of AD 2026-12-06. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2026-4655 (document 0002) · AD 2026-12-06

Type
Non-Modification Service Bulletin
Number
1000
Latest revision known
1000, Revision 6

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 16Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © Rolls-Royce plc. Filed by the FAA in regulations.gov docket FAA-2026-4655, the docket of AD 2026-12-06. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '6662c13523c0ec93c9703fda2bf7d59e9e6180ff69bccc24eecb59560d32b0a4'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

This document transmits Revision 6 to Service Bulletin TRENT 1000 72-AK316 Document History Service Bulletin Revision Status Initial Issue Apr. 9/2019 Revision 1 Apr. 18/2019 Revision 2 Apr. 30/2019 Revision 3 Jul. 16/2019 Revision 4 May 10/2024 Revision 5 May 30/2025 Bulletin Revision 6 Remove Incorporate Reason for change All pages of the Service Bulletin Pages 1 to 14 of the Service Bulletin To update 1.C. Description, 1.E.

Approval and 3. Accomplishment Instructions (RR SB:DB-11351) P.O. Box 31, Derby DE24 8BJ, UK Tel: +44 (0) 1332 242424 This Rolls-Royce Technical Publication is subject to export control as follows:

Jurisdiction: UK Export Classification: PL9009c The technical information contained in this document has been approved under the authority of - See Planning Information, Approval.

Date: July 29, 2025 TRENT 1000 SERIES PROPULSION SYSTEMS NON-MODIFICATION SERVICE BULLETIN ALERT TRENT 1000 72−AK316 Transmittal - Page 1 of 2

CHECK THAT ALL PREVIOUS TRANSMITTALS HAVE BEEN INCORPORATED If any have not been received please advise customersupport@rolls-royce.com.

© 2025 Rolls-Royce plc

P U B L I C A T I O N T R A N S M I T T A L ALERT

LIST OF EFFECTIVE PAGES The effective pages to this Service Bulletin following incorporation of Revision 6 are as follows:

Page Revision Number Revision Date Bulletin 1 6 Jul. 29/2025 2 6 Jul. 29/2025 3 6 Jul. 29/2025 4 6 Jul. 29/2025 5 6 Jul. 29/2025 6 6 Jul. 29/2025 7 6 Jul. 29/2025 8 6 Jul. 29/2025 9 6 Jul. 29/2025 10 6 Jul. 29/2025 11 6 Jul. 29/2025 12 6 Jul. 29/2025 13 6 Jul. 29/2025 14 6 Jul. 29/2025 ALERT TRENT 1000 72−AK316 Transmittal - Page 2 of 2

ENGINE - HIGH PRESSURE TURBINE BLADE - BORESCOPE INSPECTION OF THE HIGH PRESSURE TURBINE BLADE - NON-MODIFICATION SERVICE BULLETIN - NON - MOD.72-AK316

1. Planning Information A. Effectivity Boeing 787 Trent 1000-AE3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number: KH64485) HP Turbines Blades Installed.

Trent 1000-CE3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number: KH64485) HP Turbines Blades Installed.

Trent 1000-D3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number:

KH64485) HP Turbines Blades Installed.

Trent 1000-G3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number: KH64485) HP Turbines Blades Installed.

Trent 1000-H3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number:

KH64485) HP Turbines Blades Installed.

Trent 1000-J3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number:

KH64485) HP Turbines Blades Installed.

Trent 1000-K3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number:

KH64485) HP Turbines Blades Installed.

Trent 1000-L3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number:

KH64485) HP Turbines Blades Installed.

Trent 1000-M3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number: KH64485) HP Turbines Blades Installed.

Trent 1000-N3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number:

KH64485) HP Turbines Blades Installed.

Trent 1000-P3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number:

KH64485) HP Turbines Blades Installed.

Trent 1000-Q3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number: KH64485) HP Turbines Blades Installed.

Trent 1000-R3 Engines with the pre SB72-J550 (Part Number: KH10575) or SB72-J550 (Part Number:

KH64485) HP Turbines Blades Installed.

B. Reason

(1) Problem It has been identified that the pre Service Bulletin (SB) 72-J550 (known as the Entry into Service standard) and SB72-J550 standard High Pressure Turbine (HPT) blades may deteriorate to an unacceptable condition when managed in accordance with the inspection intervals defined in the Configuration, Maintenance and Procedures (CMP) and Maintenance Planning Document (MPD).

ALERT TRENT 1000 72−AK316 Page 1 of 14 Apr. 9/2019, Initial Issue Jul. 29/2025, Revision 6 © 2025 Rolls-Royce plc

(2) Safety Intent The safety intent of this NMSB is to prevent the HPT blade condition deteriorating beyond an acceptable level through introduction of additional on-wing inspections.

If the HPT blade is continued to be managed through the existing inspection intervals, it may result in an unacceptable rate of HPT blade release outside of the Regulatory Continued Airworthiness requirements.

C. Description

(1) For engines with the pre SB 72-J550 or SB 72-J550 standards of HPT blade installed, this NMSB instructs HPT blade borescope inspections and repeat inspection intervals once the engine reaches a specified cycle limit. The borescope inspections of the Leading Edge (LE) and Convex Surface are to be carried out in accordance with the Aircraft Maintenance Manual (AMM) HPT blade borescope inspection task and sentenced in accordance with the accomplishment instructions 3.C. Any other observations away from the LE and Convex Surface of the HPT blade are to be sentenced in line with the AMM limits and are not subject to accomplishment in accordance with this NMSB. Further examples of LE and Convex Surface cracks found in-service are available in Notice To Operator (NTO) 307 on Rolls-Royce Care.

Accomplishment of this NMSB should be recorded in accordance with local Service Bulletin tracking procedures.

Return the borescope inspection report and any available photos and/or videos to your Rolls-Royce Airline Support Team.

Revision 1 of this NMSB introduced an option to use the Cobra Hydraulic Lift Engine Removal AMM Task when removing the engine. It also introduced an option to inspect the HPT blade through one of the combustor borescope ports and an option to use a borescope guide tube for the inspection. Finally, it added clarity to the location on the Leading Edge of the blade which is to be inspected, including a figure to indicate the inspection relative to the blade cooling holes.

Revision 2 of this NMSB introduced a 10 cycle fly-on for HPT blade leading edge axial cracks up-to 4 mm (0.16 in.) in length.

Revision 3 of this NMSB updated the repeat HPT blade borescope inspection interval to 50 cycles for HPT blade set lives over 650 flight cycles. It also updated figure 3 which shows an example of an axial crack on a blade with TBC loss.

Revision 4 of this NMSB removed de-pair instructions, updated compliance statement and threshold inspection. It also introduced Convex surface inspection instructions, figure 5 which shows Convex surface area to be inspected and figures 6 and 7 which shows the examples of axial crack on Convex upper surface.

Revision 5 of this NMSB added revised HPT blade limits for axial cracks on the LE and Convex Surface. This revision of NMSB introduced a new inspection at 550 flight cycles. The HPT Blade 1000 cycle life limit was removed.

Revision 6 of this NMSB reduces the HPT blade LE cracking repeat inspection interval for cracks less than 2 mm from 20 flight cycles to 10 flight cycles.

(2) This Non-Modification Service Bulletin is in three Parts as follows:

(a) Part A - Deleted

(b) Part B - Deleted ALERT TRENT 1000 72−AK316 Page 2 of 14 Apr. 9/2019, Initial Issue Jul. 29/2025, Revision 6 © 2025 Rolls-Royce plc

(c) Part C - On-Wing HPT Blade Inspection D. Compliance

(1) On-wing ALERT This Non-Modification Service Bulletin is likely to be subject to the incorporation requirements of an Airworthiness Directive

(a) Part A - Deleted

(b) Part B - Deleted

(c) Part C - Borescope Inspections of the HPT blades [1] For engines which at the time of this NMSB revision have accumulated less than 500 cycles since new or since the last HPT blade replacement (whichever is lower), inspect in accordance with accomplishment instructions 3.C before the engine reaches 550 cycles. Re-inspect at an interval of no more than 50 cycles.

[2] For engines which at the time of this NMSB revision have accumulated more than 500 cycles since new or since the last HPT blade set replacement (whichever is lower), inspect in accordance with accomplishment instructions 3.C within 50 cycles of this NMSB revision. Re-inspect at repeat intervals of no more than 50 cycles.

For engines that have been inspected in accordance with previous revisions of this NMSB, continue to inspect in accordance with the repeat interval in the latest NMSB revision.

[3] Following any engine In-Flight Shutdown (IFSD), inspect the not-affected (no-IFSD) Trent 1000 TEN engine in accordance with accomplishment instructions 3.C in no more than 10 flight cycles.

(2) In-Shop Not Applicable.

E. Approval NMSB 72-AK316 was approved by Rolls-Royce on Jul. 29/2025. The technical content of this document is approved under the authority of the DOA ref. EASA.21J.065.

F. Manpower

(1) On-Wing

(a) Part C - HPT Blade Inspection Front and Rear Surfaces NOTE: It is necessary to allow the engine to cool before beginning this inspection.

[1] Time to gain access:

0.5 hours (1 person) [2] Time to inspect:

3.5 hours (1 person) ALERT TRENT 1000 72−AK316 Page 3 of 14 Apr. 9/2019, Initial Issue Jul. 29/2025, Revision 6 © 2025 Rolls-Royce plc

[3] Time to restore to serviceable condition:

0.5 hours (1 person) G. Material Price and Availability None.

H. Tooling Price and Availability Visual Borescope Equipment NOTE: Image capture capability is required.

Optional: RRT109933 - HPT Blade Inspection Guide Tube I. References

(1) Aircraft Maintenance Manual (AMM):

(a) Task DMC-B787-A-R72-00-00-23C-280C-A, High Pressure Turbine Blades (with a borescope) - Special Detail Inspection

(b) Task DMC-B787-A-R72-00-00-22C-280C-A, High Pressure Nozzle Guide Vanes (with a borescope) - Special Detail Inspection

(2) Notice to Operators (NTO):

(a) Notice to Operators 307 - Guidance on Inspecting and Sentencing Trent 1000-TEN & Trent 7000 High Pressure Turbine Blades P/N KH64485 ALERT TRENT 1000 72−AK316 Page 4 of 14 Apr. 9/2019, Initial Issue Jul. 29/2025, Revision 6 © 2025 Rolls-Royce plc

2. Material Information None.

ALERT TRENT 1000 72−AK316 Page 5 of 14 Apr. 9/2019, Initial Issue Jul. 29/2025, Revision 6 © 2025 Rolls-Royce plc

3. Accomplishment Instructions A. Deleted.

B. Deleted.

C. Inspect the HP turbine blades front and rear surfaces.

WARNING: BE CAREFUL WHEN YOU DO WORK ON THE ENGINE PARTS AFTER THE ENGINE IS STOPPED. THE ENGINE PARTS CAN STAY HOT FOR ALMOST ONE HOUR. DO NOT TOUCH THE HOT PARTS WITHOUT THE APPLICABLE GLOVES. HOT PARTS CAN CAUSE INJURIES TO PERSONNEL.

CAUTION: MAKE SURE THAT YOU OBEY THE TEMPERATURE LIMITS FOR THE BORESCOPE EQUIPMENT AS SPECIFIED IN THE MANUFACTURES INSTRUCTIONS. IF YOU START

THE BORESCOPE PROCEDURE AND THE ENGINE IS TOO HOT, DAMAGE TO THE EQUIPMENT CAN OCCUR.

CAUTION: IF REQUIRED MAKE SURE THAT YOU ACCURATELY MEASURE THE AREAS OF LEADING EDGE EROSION ON THE FRONT SURFACE OF THE BLADE. IF THE

MEASUREMENT OF THE LEADING EDGE EROSION IS NOT ACCURATE, THEN AN INCORRECT REPEAT INSPECTION INTERVAL COULD BE APPLIED TO THE ENGINE.

CAUTION: IN ORDER TO REDUCE THE POTENTIAL FOR MULTIPLE-ENGINE IN-FLIGHT

SHUTDOWN, POWER LOSS, OR OTHER ANOMALY DUE TO MAINTENANCE ERROR,

ROLLS-ROYCE RECOMMENDS THAT OPERATORS AVOID PERFORMING

MAINTENANCE ON MULTIPLE ENGINES INSTALLED ON THE SAME AIRCRAFT AT THE SAME TIME. IF IT IS NOT POSSIBLE TO AVOID MAINTENANCE ON MORE THAN ONE

ENGINE AT THE SAME TIME, ROLLS-ROYCE RECOMMENDS THAT ADDITIONAL

CONTROLS ARE APPLIED IN ORDER TO MAKE SURE THAT MAINTENANCE TASKS HAVE BEEN COMPLETED AS DEFINED. MAINTENANCE GUIDELINES SHOULD BE REVISED, WHERE POSSIBLE, TO PROMOTE THIS RECOMMENDATION.

NOTE: The front surface is inspected through the High Pressure Nozzle Guide Vane (HP NGV) borescope port or through the combustor, the rear surface is inspected through the Intermediate Pressure Nozzle Guide Vane (IP NGV) borescope port.

(1) Inspect the front surface LE (Area A) of the HPT blade:

Option A: Gain access to inspect the HPT blades through the HP NGV borescope port in accordance with the Aircraft Maintenance Manuals (AMM) Task DMC-B787-A-R72-00-00-23C-280C-A.

Option B: Gain access to inspect the HPT Blades through the combustor borescope port at the 3 o’clock position (3 o’clock position when looking forward from the rear of the engine) in accordance with AMM Task DMC-B787-A-R72-00-00-22C-280C-A. This route requires passing the borescope tip between the HP Nozzle Guide Vanes. A HPT blade borescope guide tube (RRT109933 or a locally manufactured alternative) is recommended when inspecting from the combustor borescope port, but is not mandatory.

NOTE: The design of a locally manufactured guide tube must be agreed by Rolls-Royce plc before use.

Inspect the LE Area A in the LE Row 2 (cooling holes 3-6 from tip) and Row 3 (cooling holes 1-3 from tip) of the HPT blade for the following damage:

ALERT TRENT 1000 72−AK316 Page 6 of 14 Apr. 9/2019, Initial Issue Jul. 29/2025, Revision 6 © 2025 Rolls-Royce plc

(a) Axial cracks in the LE Row 2 (cooling holes 3-6 from tip) and Row 3 (cooling holes 1-3 from tip).

Refer to Figure 1 for cooling hole position. Refer to Figure 2 and Figure 3 for example of LE axial cracks at the cooling holes.

NOTE: A crack that is more than 10 degrees from the vertical axis is specified as an axial crack.

(b) Photograph and record the crack length of any axial cracking observed in Appendix-1.

(c) If an axial crack of less than or equal to 3,0 mm (0.12 in.) in length is identified on one or more HPT blades, examine again (repeat inspection in accordance with Section 3.C Accomplishment Instructions of this NMSB) within 10 flight cycles.

(d) If an axial crack of more than 3,0 mm (0.12 in.) and less than or equal to 4,0 mm (0.16 in.)

in length is identified on one or more HPT blades, then reject the engine within 10 flight cycles.

(e) If an axial crack of more than 4,0 mm (0.16 in.) in length is identified on one or more HPT blades, then reject the engine within 0 flight cycles.

(f) Any other observations identified during the inspection are to be sentenced in accordance with the AMM limits.

(2) Inspect the Convex surface (Area C4) of the HPT blades:

Gain access to inspect the rear surface of the HPT blades through the IP NGV borescope port in accordance with the Aircraft Maintenance Manuals (AMM) Task DMC-B787-A-R72-00-00-23C-280C-A.

Inspect the upper half of the Convex surface (Area C4) of the HPT blades for the following damage (refer to Figure 4 for drawing of approximate area of C4 to be inspected):

(a) Axial cracks (refer to Figure 5 and Figure 6 for examples).

NOTE: A crack that is more than 10 degrees from the vertical axis is specified as an axial crack.

(b) Photograph and record the crack length of any axial cracking observed in Appendix-1.

(c) If an axial crack of less than or equal to 3,0 mm (0.12 in.) is identified on one or more HPT blades, then examine again (repeat inspection in accordance with Section 3.C Accomplishment Instructions of this NMSB) within 10 flight cycles.

(d) If an axial crack of more than 3,0 mm (0.12 in.) is identified on one or more HPT blades, then reject the engine within 0 flight cycles.

(e) Any other observations identified during the inspection are to be sentenced in accordance with the AMM limits.

(3) Accomplishment of NMSB72-AK316 Part C of this Non-Modification Service Bulletin should be recorded in accordance with local Service Bulletin tracking system procedures.

ALERT TRENT 1000 72−AK316 Page 7 of 14 Apr. 9/2019, Initial Issue Jul. 29/2025, Revision 6 © 2025 Rolls-Royce plc

Page 10OCROpen in PDF

R ROTOE Holes 3-6 from tip Row 2 Holes 1-3 from tip Row 3 Inspection and Cooling Hole Locations on the HPT Blade Figure. 1 ROW 2 ROW 2

COOLING COOLING HOLES ROW 3

COOLING ROW 3 'HOLES

COOLING * HOLES

SMALL AXIAL

LARGE AXIAL CRACK Large Crack on LE with TBC Loss Small Crack on the LE without TBC Loss Figure.2 Figure.3 dej8007561 ALERT TRENT 1000 72-AK316 Apr. 9/2019, Initial Issue

• Jul. 29/2025, Revision 6 Page 8 of 14 © 2025 Rolls-Royce p/c

Page 11OCROpen in PDF

R ROTOE 20mm (039 n C4 boundary to shroud LE Approximate distance from Approximate distance fron, C4 boundary to TE C4 24 mm (0.94 in.)

Approximate distance from C4 boundary to 10 mm (0.39 in.) blade LE Note: Approximate dimensions assume circumferential views.

Convex Surface (Area C4) on Upper Half of HPT Blade Figure.4 dej8006796 ALERT TRENT 1000 72-AK316 Apr. 9/2019, Initial Issue

• Jul. 29/2025, Revision 6 Page 9 of 14 © 2025 Rolls-Royce p/c

Downward Sloping Convex Surface Crack, Upward Sloping Convex Crack and Convex Surface Crack Progressing in Multiple Directions Figure.5 dej8006797 ALERT TRENT 1000 72−AK316 Page 10 of 14 Apr. 9/2019, Initial Issue Jul. 29/2025, Revision 6 © 2025 Rolls-Royce plc