© Rolls-Royce plc. Filed by the FAA in regulations.gov docket FAA-2007-28059; AD 2015-02-20 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'bf092dc4fb5c9838f0ebfb0bc4a19260d63f63cc5707b82f9ebeaabd6ec836f4'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

This document transmits Revision 4 to Service Bulletin RB211-72-G448 Document History Service Bulletin Revision Status Supplement Revision Status Initial Issue Jul.26/10 Revision 1 Oct.29/10 Revision 2 Dec.23/10 Revision 3 Jul.7/11 Bulletin Revision 4 Remove Incorporate Reason for change Pages 1 to 51 of the Service Bulletin Pages 1 to 53 of the Service Bulletin Revised 3.Accomplishment Instructions to clarify acceptance criteria for the balance washer keys (tabs).

Added/Revised Figs.7 thru Fig.9. Updated sections

1.B. Reason, 1.D.

Compliance, 1.E. Approval and 1.I. References. Minor text changes have also been made.

Printed in Great Britain Aug.21/14 RB211 TRENT 500 AND TRENT 900 SERIES PROPULSION SYSTEMS NON-MODIFICATION

SERVICE BULLETIN RB.211−72−G448 Transmittal - Page 1 of 4 Date

All pages of Appendix 1 Page 1 and 2 of Appendix 1 Revised 3.Accomplishment Instructions to clarify acceptance criteria for the balance washer keys (tabs).

Added/Revised Figs.7 thru Fig.9. Updated sections

1.B. Reason, 1.D.

Compliance, 1.E. Approval and 1.I. References. Minor text changes have also been made.

All pages of Appendix 2 Page 1 and 2 of Appendix 2 Revised 3.Accomplishment Instructions to clarify acceptance criteria for the balance washer keys (tabs).

Added/Revised Figs.7 thru Fig.9. Updated sections

1.B. Reason, 1.D.

Compliance, 1.E. Approval and 1.I. References. Minor text changes have also been made.

All pages of Appendix 3 Page 1 and 2 of Appendix 3 Revised 3.Accomplishment Instructions to clarify acceptance criteria for the balance washer keys (tabs).

Added/Revised Figs.7 thru Fig.9. Updated sections

1.B. Reason, 1.D.

Compliance, 1.E. Approval and 1.I. References. Minor text changes have also been made.

Printed in Great Britain RB.211−72−G448 Transmittal - Page 2

LIST OF EFFECTIVE PAGES The effective pages to this Service Bulletin following incorporation of Revision 4 are as follows:

Page Revision Number Revision Date Bulletin R 1 4 Aug.21/14 R 2 4 Aug.21/14 R 3 4 Aug.21/14 R 4 4 Aug.21/14 R 5 4 Aug.21/14 R 6 4 Aug.21/14 R 7 4 Aug.21/14 R 8 4 Aug.21/14 R 9 4 Aug.21/14 R 10 4 Aug.21/14 R 11 4 Aug.21/14 R 12 4 Aug.21/14 R 13 4 Aug.21/14 R 14 4 Aug.21/14 R 15 4 Aug.21/14 R 16 4 Aug.21/14 R 17 4 Aug.21/14 R 18 4 Aug.21/14 R 19 4 Aug.21/14 R 20 4 Aug.21/14 R 21 4 Aug.21/14 R 22 4 Aug.21/14 R 23 4 Aug.21/14 R 24 4 Aug.21/14 R 25 4 Aug.21/14 R 26 4 Aug.21/14 R 27 4 Aug.21/14 R 28 4 Aug.21/14 R 29 4 Aug.21/14 R 30 4 Aug.21/14 R 31 4 Aug.21/14 R 32 4 Aug.21/14 R 33 4 Aug.21/14 R 34 4 Aug.21/14 R 35 4 Aug.21/14 R 36 4 Aug.21/14 R 37 4 Aug.21/14 R 38 4 Aug.21/14 R 39 4 Aug.21/14 R 40 4 Aug.21/14 R 41 4 Aug.21/14 R 42 4 Aug.21/14 R 43 4 Aug.21/14 R 44 4 Aug.21/14 Printed in Great Britain RB.211−72−G448 Transmittal - Page 3

R 45 4 Aug.21/14 R 46 4 Aug.21/14 R 47 4 Aug.21/14 R 48 4 Aug.21/14 R 49 4 Aug.21/14 R 50 4 Aug.21/14 R 51 4 Aug.21/14 R 52 4 Aug.21/14 R 53 4 Aug.21/14 Appendix 1 R 1 4 Aug.21/14 R 2 4 Aug.21/14 Appendix 2 R 1 4 Aug.21/14 R 2 4 Aug.21/14 Appendix 3 R 1 4 Aug.21/14 R 2 4 Aug.21/14 Printed in Great Britain RB.211−72−G448 Transmittal - Page 4

1. Planning Information A. Effectivity

(1) Airbus A340 RB211 TRENT553-61 Engines RB211 TRENT553A2-61 Engines RB211 TRENT556-61 Engines RB211 TRENT556A2-61 Engines RB211 TRENT556B-61 Engines RB211 TRENT556B2-61 Engines RB211 TRENT560-61 Engines RB211 TRENT560A2-61 Engines

(2) Airbus A380 RB211 TRENT970-84 Engines RB211 TRENT970B-84 Engines RB211 TRENT972-84 Engines RB211 TRENT972B-84 Engines RB211 TRENT977-84 Engines RB211 TRENT977B-84 Engines RB211 TRENT980-84 Engines B. Reason

(1) Problem Cracking of the rear balance land has been found on two Trent 800 IP compressor shafts and on one Trent 700 IP compressor shaft. The balancing feature and method is similar on Trent 500 and Trent 900 engines although the disc geometry is different from Trent 700 and Trent 800 engines.

ENGINE - IP COMPRESSOR SHAFT - IN SHOP EDDY CURRENT OR BORESCOPE INSPECTION OF BALANCE LAND - NON-MODIFICATION SERVICE BULLETIN - NON - MOD.72-G448 Printed in Great Britain RB.211−72−G448 Page 1 of 53 Jul.26/10 Aug.21/14R

Non-Modification Service Bulletin (NMSB) 72-AF260 was issued to specify an in-shop visual inspection of the rear balance land and applied to Trent 500, Trent 700 and Trent 800 engines.

NMSB72-G269 was later issued to specify an in-shop visual inspection of the rear balance land and applied to Trent 900 engines only.

NMSB72-G448 specifies an enhanced crack detection technique, eddy current inspection for the rear balance land when the rear of the IPC module is exposed and a borescope inspection of the balance land when it is not exposed. This inspection is to be done in-shop on Trent 500 and Trent 900 engines.

(2) This NMSB supersedes NMSB 72-AF260 (for Trent 500 engines) and NMSB 72-G269 (for R R Trent 900 engines).

NMSB 72-AF260 and NMSB 72-G269 will be cancelled.R

(3) Substantiation This NMSB instructs in-shop inspection of the IP compressor shaft rear balance land. If the rear of the IP compressor module is exposed this is an eddy current inspection. If it is not exposed this is a borescope inspection gaining access through the intermediate case.

Revision 1 of this NMSB was issued to add a procedure for determining if an Eddy Current Inspection crack indication is spurious or genuine.

Revision 2 of this NMSB was issued to extend the date from which the NMSB became effective, that followed a delay in the availabilty of the Eddy Current Inspection tooling.

Revision 3 of this NMSB wasR to change the order of visual and eddy current inspection procedures and to make minor changes to eddy current inspection procedures in section 3.D. Accomplishment Instructions.

Revision 4 of this NMSB is issued to revise sections 1.D. Compliance and to clarify acceptance criteria for the balance washer keys (tabs) in 3.

Accomplishment Instructions, including a new Figure (Fig.9 sheet 2 of 2).

Minor text changes have been made and additional references added to 1.I.

References.

R R R R R

(4) Effect of Bulletin on:

(a) Operation Not affected.

(b) Maintenance Not affected.

Printed in Great Britain RB.211−72−G448 Page 2 Jul.26/10 Aug.21/14R

(c) Overhaul Not affected.

(d) Repair Schemes Not affected.

(e) Interchangeability Not affected.

C. Description This NMSB instructs an in-shop inspection of the IP compressor shaft rear balance land in order to maintain serviceability and obtain data to support engineering analysis.

Send copies of the NMSB inspection results to your Rolls-Royce service representative by completion of Appendix 1 (borescope inspection) or Appendix 2 (eddy current inspection) or send an equivalent form containing the same information.

NOTE: If the rear face of the IPC module is not exposed, visual borescope inspection of the IPC rear balance land, refer to 3.B. or 3.C., is acceptable in lieu of a repeat on-wing inspection required under NMSB 72-AH058 or NMSB 72-AH059 and will reset the cyclic interval count to zero.

R R R R R D. Compliance

RECOMMENDED This NMSB must be accomplished on engines at Module M32-IPC Module, rework level of Module Check and Repair, Module Overhaul, Engine Refurbishment or where the engine is disassembled sufficiently to expose the rear face of the IP compressor module.

R R R R If the rear face of the IPC module is exposed: Conduct an Eddy current inspection, refer to 3.D.

R R This NMSB does not need be accomplished on IP compressor shafts that have a life of zero cycles since new.

R R This Non-Modification Service Bulletin is the subject of an European Aviation Safety Agency (EASA) approved Airworthiness Directive (AD) No.: AD2014-0152.

R R Printed in Great Britain RB.211−72−G448 Page 3 Jul.26/10 Aug.21/14R

E. Approval The technical content of this Non-Modification Service Bulletin was approved under the authority of Design Organisation Approval EASA.21J.035 on Jul.21/10, Oct.28/10, Dec.23/10, Jul.5/11R and was re-approved on Aug.21/14.

F. Manpower

(1) Borescope Inspection:

(a) Time to gain access 30 minutes (1 person).

(b) Time to inspect 1 hour 30 minutes (2 persons).

(c) Time to restore to serviceable condition 1 hour (1 person).

(2) Eddy Current Inspection:

(a) Time to remove balance weights 15 minutes (1 person).

(b) Time to clean balance land Up to 2 hours, depending on level of debris in balance land recess (1 person).

(c) Time to inspect 2 hours (1 person).

NOTE: The ECI technique described in section 3. Accomplishment Instructions must only be carried out by personnel approved to the applicable national standard (EN4179, NAS 410 or equivalent) at level 2 or higher.

(d) Time to install balance weights 15 minutes (1 person).

NOTE: Parts affected by this NMSB are accessible at overhaul G. Material Price and Availability Modification kit not required; parts supplied as single line items.

Printed in Great Britain RB.211−72−G448 Page 4 Jul.26/10 Aug.21/14R

H. Tooling Price and Availability The following equipment is required to accomplish this NMSB:

Part No. Description Borescope 4 mm or 6 mm flexible borescope with forward viewing and side view tips HU40324 IP Rotor turning tool (Trent 500) HU43985 IP Rotor turning tool (Trent 900) HU82346 Borescope guide tube Rohmann Elotest B1 or equivalent instrument Phase Display Eddy Current Instrument HU44791 Trent 500 IPC stage 8 balance land Eddy Current Inspection Kit comprising of the following parts:

HU44793 (Wheeled carriage) MDK1 H-1803.03.1 (Eddy Current Probe) HU44792 (Calibration Block) HU44795 Trent 900 IPC stage 8 balance land Eddy Current Inspection Kit comprising of the following parts:

HU44797 (Wheeled carriage) MDK1 H-1803.03.1 (Eddy Current Probe) HU44796 (Calibration Block) Elotest instruments - EK/2HF/1 Connecting leads for other instruments are available from Rohmann Probe to instrument connecting cable I. References

(1) Trent 500 Engine Manual, 72-32-31, Cleaning, Inspection

(2) Trent 900 Engine Manual, 72-00-13, Clip Position Data

(3) Trent 900 CIR Manual, 72-32-31, Cleaning, Inspection

(4) Overhaul Processes Manual TSD594J, 70-00-00, OP101, OP117, OP363

(5) Standard Practices Manual, 70-51-00, Torque Tighten Components, 70-12-04, Procedures used to Lock Threaded Parts

(6) Rolls-Royce RB211 Non-Modification Service Bulletins:

(a) 72-AF260 Engine - IP compressor shaft - Visual inspection of balance land Printed in Great Britain RB.211−72−G448 Page 5 Jul.26/10 Aug.21/14R

(b) 72-G269 Engine - IP compressor shaft - Visual inspection of balance land

(c) 72-AH058R Engine - IP Compressor Shaft - Visual Borescope Inspection of Balance Land R R

(d) 72-AH059R Engine - IP Compressor Shaft - Visual Borescope Inspection of Balance Land R R

(7) Rolls-Royce RB211 Service Bulletins:R

(a) 72-AH555R Engine - IP compressor Shaft - Introduction of revised Method of Balancing the Rear of the IP Compressor Rotor R R

(b) 72-AH561R Engine - IP Compressor Shaft - Introduction of revised Balancing Method at the Rear of the IP Compressor using New Balance Weights under Blade R R R Printed in Great Britain RB.211−72−G448 Page 6 Jul.26/10 Aug.21/14R

2. Material Information A. Parts required to accomplish this Non-Modification Service Bulletin:

All Engines 72-32-31 FIG ITEM NO.

NEW PART NO.

QTY PART TITLE MAT OLD PART NO.

INSTR DISP 01450 AS44702 AR Bolt, 0.190 in. dia x 0.335 in.

VU1653

- AS44702 - 01452 AS44691 AR Washer, VU1653 - AS44691 - 01445 AS44696 AR Clamp - AS454696 - 01415 AS44695 -150 AR Balance weight - AS44695-150- 01417 AS44695 -175 AR Balance weight - AS44695-175- 01419 AS44695 -200 AR Balance weight - AS44695-200- 01421 AS44695 -225 AR Balance weight - AS44695-225- 01423 AS44695 -250 AR Balance weight - AS44695-250- 01425 AS44695 -275 AR Balance weight - AS44695-275- 01427 AS44695 -300 AR Balance weight - AS44695-300- Trent 500 Engines 75-22-49 FIG ITEM NO.

NEW PART NO.

QTY PART TITLE MAT OLD PART NO.

INSTR DISP 21100 FW17133 AR Air Tube - FW17133 - Printed in Great Britain RB.211−72−G448 Page 7 Jul.26/10 Aug.21/14R

FIG ITEM NO.

NEW PART NO.

QTY PART TITLE MAT OLD PART NO.

INSTR DISP 21106 AS48510 AR Bolt - AS48510 - 21114 AS48513 AR Bolt - AS48513 - 21112 AS12944 AR Washer - AS12944 - 21113 CU37148 AR Washer - CU37148 - 21125 AS48408 AR Bolt (CP101919) - AS48408 - 21126 K8831 AR Washer (CP101919) - K8831 - 21128 UP11470 AR Clip (CP101919) - UP11470 - 21132 AS20624 AR Nut (CP101919) - AS20624 - Trent 900 Engines 75-22-49 FIG ITEM NO.

NEW PART NO.

QTY PART TITLE MAT OLD PART NO.

INSTR DISP 13100 FW24803 AR Air Tube - FW24803 - 13106 AS48528 AR Bolt - AS48528 - 13107 AS48512 AR Bolt - AS48512 - NOTE: Quantity As Required (AR) up to a maximum of 4.

Printed in Great Britain RB.211−72−G448 Page 8 Jul.26/10 Aug.21/14R

Pages 13–24 of 63