TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'e6c410ecef604c1575cf2c5d9e60520136a3e8780d386c79f66b619b0306e703' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'e6c410ecef604c1575cf2c5d9e60520136a3e8780d386c79f66b619b0306e703' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
P.O. Box 31, DERBY DE24 8BJ, UK Telephone: 44 (0) 1332 242424 Rolls-Royce Fax: 44(0) 1332 249936
PUBLICATION TRANSMITTAL The technical information contained in this document has been approved under the authority of - See Planning Information, Approval.
Date May. 5/16 RB211 TRENT 900 SERIES PROPULSION SYSTEMS NON-MODIFICATION SERVICE BULLETIN Printed in Great Britain This document transmits the Initial Issue of Service Bulletin RB211-72-AJ101 ALERT Bulletin Initial Issue Remove Incorporate Reason for change Pages 1 to 19 of the Initial issue Service Bulletin Page 1 and 2 of Initial issue Appendix 1 ALERT RB.211-72-AJ101 Transmittal - Page 1 of 2
CHECK THAT ALL PREVIOUS TRANSMITTALS HAVE BEEN INCORPORATED If any have not been received please advise Customer Data Services, Rolls-Royce pic, Derby, England © Rolls-Royce plc (date as above) Printed in Great Britain
LIST OF EFFECTIVE PAGES The effective pages to this Service Bulletin are as follows:
Page Revision Number Revision Date Bulletin 1 May 5/16 2 May 5/16 3 May 5/16 4 May 5/16 5 May 5/16 6 May 5/16 7 May 5/16 8 May 5/16 9 May 5/16 10 May 5/16 11 May 5/16 12 May 5/16 13 May 5/16 14 May 5/16 15 May 5/16 16 May 5/16 17 May 5/16 18 May 5/16 19 May 5/16 Appendix 1 1 May 5/16 2 May 5/16 Printed in Great Britain RB.211−72−AJ101 Transmittal - Page 2
1. Planning Information A. Effectivity Airbus A380 RB211 TRENT970-84 engines incorporating Service Bulletin 72-J024.
RB211 TRENT970B-84 engines incorporating Service Bulletin 72-J024.
RB211 TRENT972-84 engines incorporating Service Bulletin 72-J024.
RB211 TRENT972B-84 engines incorporating Service Bulletin 72-J024.
B. Reason Problem Inspections of the Tail Bearing Housing (TBH) to Non-Modification Service Bulletin (NMSB) 72-AG971 have identified crack indications in the mount lug forging Leading Edge (LE). This area is currently being inspected through NMSB 72-AH154.
A modification of the Tail Bearing Housing has been released in Service Bulletin 72-J024. This modification introduces a local change of the leading edge profile, generating a cutback feature to reduce the stress on this location and minimise the risk of cracking. However, cracking may still occur in the future. As a consequence, this Non-Modification Service Bulletin is released to instruct the inspection of Tail Bearing Housings incorporating SB 72-J024. This NMSB no longer includes the requirement to inspect the fail safe male catcher for damage. This was originally included in NMSB 72-AH154 to support the root cause understanding of the leading edge cracking. This root cause investigation has concluded that cracking is not related to a potential contact of the catcher with the engine mounts.
C. Description This NMSB instructs the following:
On-wing or in-shop Non-Destructive Test (NDT) inspections of the mount lug forging LE and cutback areas which are required on Trent 900 engines incorporating Service Bulletin 72-J024 fleet every 1000 flight cycles.
This NMSB details the on-wing and in-shop inspection techniques for the TBH.
ENGINE - LP TURBINE EXHAUST CASE AND SUPPORT ASSEMBLY (TAIL BEARING HOUSING) MOUNT
LUG FORGING LEADING EDGE AND CUTBACK INSPECTIONS - NON-MODIFICATION SERVICE BULLETIN
- NON - MOD.72-AJ101 Printed in Great Britain RB.211−72−AJ101 Page 1 of 19 May. 5/16 May. 5/16
On-wing, the mount lug forging LE and cutback areas are to be Fluorescent Penetrant Inspection (FPI) crack tested. In-shop, the mount lug forging LE and cutback areas can either be inspected using a local FPI method or through a full FPI of the entire TBH.
This NMSB applies to all the below TBH part numbers:
KH46677, KH46678, KH45090.
Results of the inspections are to be returned to Rolls-Royce. Return Appendix 1 (or similar form) to your Rolls-Royce Service representative.
D. Compliance ALERT This NMSB is expected to be the subject of an EASA Airworthiness Directive.
Rolls-Royce recommends that the following action is undertaken to maintain continued airworthiness.
This NMSB applies to both on-wing and in-shop activities.
(1) On-wing:
Accomplish the first inspection in accordance with section 3.A.
Accomplishment Instructions, accomplish the first inspection within 1000 flight cycles of the embodiment of SB 72-J024 for the TBH mount lug forging LE and cutback areas if it is not to be done in-shop.
Any TBH that received a full FPI in accordance with NMSB 72-AG971, 3.C.
Accomplishment Instructions are deemed as compliant with this NMSB (72-AJ101).
Subsequent inspections whether in-shop or on-wing should be within 1000 cycles of previous inspection.
(2) In-shop:
Mount Lug Forging LE area (Local Inspection) This inspection must be applied on all Engines where the Module 52 is level 1 (Serviceability). The inspection must be carried out whilst the part is at module level and strip of the module to piece part is not required.
For Engines where the Module 52 is Level 2 (Check and Repair) or above, this local inspection is not required if the TBH receives a full Fluorescent Penetrant Inspection in accordance with NMSB 72-AG971, 3.C.
Accomplishment Instructions. Otherwise the local inspection is required.
Printed in Great Britain RB.211−72−AJ101 Page 2 May. 5/16 May. 5/16
For Engines that are hospital shop visit, this inspection can be applied but is not compulsory.
All Engine Rework definitions can be found in the applicable paragraphs of the Trent 900 Generic Engine Management Programme (EMP).
For all Engines not currently installed on an Aircraft and not planned for induction into overhaul shop, this inspection can be applied but it is not compulsory.
Accomplish the first inspection in accordance with section 3.B.
Accomplishment Instructions, accomplish the first inspection within 1000 flight cycles of the embodiment of SB 72-J024 for the TBH mount lug forging LE and cutback areas if it is not to be done on-wing.
(3) Any TBH that have received a full FPI in accordance with NMSB 72-AG971,
3.C. Accomplishment Instructions, are deemed as compliant with this NMSB (72-AJ101).
Subsequent inspections whether in-shop or on-wing should be within 1000 cycles of the previous inspection.
E. Approval The technical content of this Non-Modification Service Bulletin was approved under the authority of Design Organisation Approval EASA.21J.035 on Apr.29/16.
F. Manpower
(1) On-wing
(a) Time to gain access
2.5 hours (2 person)
(b) Time to inspect Mount Lug Forging LE Areas 2 hours (2 person)
(c) Time to restore to serviceable condition
2.5 hours (2 person)
(2) In-shop
(a) Time to inspect Mount Lug Forging LE Areas 2 hours (2 persons) Printed in Great Britain RB.211−72−AJ101 Page 3 May. 5/16 May. 5/16
The FPI defined in this Technical Instruction shall only be performed by personnel qualified to Fluorescent Penetrant Inspection FPI Level 2 or higher and in possession of an up to date eyesight record in accordance with EN4179/NAS410 or alternative standards/guidelines accepted by the applicable National Aviation Authority.
G. Material Price and Availability OMat 632 - Aerosol penetrant - Commercially Available.
OMat 617 - Aerosol developer - Commercially Available.
OMat 150 - Acetone - Commercially Available.
OMat 2/101 - Lint-Free Cloths - Commercially Available.
OMat 677 - Penetrant Test Panel - Commercially Available.
H. Tooling Price and Availability Material/Compounds Description Dark Non-reflective cover To darken the area for inspection - Commercially available Ultra Violet (UV) light source 2 alternatives Capable of providing a minimum UV radiation intensity of 1200 micro W/sq.cm at the inspection surface.
Alternatively, Spectroline Tritan 365 UV/White LED Inspection Lamp, Portable, Battery Operated Version, Part Number - TRI-365MH series Kit Unit Price - Approximately £1200, Supplier - RSL NDT Ltd.
Mirror Commercially Available.
I. References
(1) Rolls-Royce RB211 Service Bulletin:
72-J024 Engine - Exhaust Case - Introduction of LP Turbine Exhaust Case and Support Assemblies Accomplished by Rework of Existing Assemblies
(2) Rolls-Royce RB211 Non-Modification Service Bulletins:
(a) 72-AG971 Trent 900 LP Turbine Exhaust Case and Support Assembly (Tail Bearing Housing) Mount Lug Run-Out and Top Core Vane Inspections - Non-Modification Service Bulletin Printed in Great Britain RB.211−72−AJ101 Page 4 May. 5/16 May. 5/16
(b) 72-AH154 Engine - LP Turbine Exhaust Case and Support Assembly (Tail Bearing Housing) Mount Lug Forging Leading Edge Inspections - Non-Modification Service Bulletin
(3) Engine Manual
(a) Task 72-52-51-200-801, Cleaning/Inspection and Repair Data Task, Examine the LP Turbine Exhaust Case.
(b) Task 72-52-51-300-023, Low Pressure (LP) Turbine Bearing and Support Exhaust Case - Dress to Remove Micro cracking on the Vane Leading Edge at Vanes 1 and 14 (FRSH741).
(4) Aircraft Maintenance Manual (AMM)
(a) 71-13-00, Maintenance Practices, Opening of Fan Cowl Doors.
(b) 78-26-00, Maintenance Practices, Opening/Closing of the Fan Exhaust Cowl or Thrust Reverser.
(c) 78-30-00, Deactivation/Reactivation, Make the Thrust Reverser Unserviceable for Maintenance.
(d) 78-11-41-000-801-A, Removal of the Exhaust Nozzle.
(e) 78-11-42-000-804-A, Removal of the Aft Exhaust Plug.
(f) 78-11-42-000-803-A, Removal of the Forward Exhaust Plug.
(g) 78-11-41-400-801-A, Installation of the Exhaust Nozzle.
(h) 78-11-42-400-804-A, Installation of the Aft Exhaust Plug.
(i) 78-11-42-400-803-A, Installation of the Forward Exhaust Plug.
(j) 72-21-00-300-825-A, Low Pressure (LP) Turbine Bearing and Support Exhaust Case - Dress to Remove Micro cracking on the Vane Leading Edge at Vanes 1 and 14 (FRSH741).
Printed in Great Britain RB.211−72−AJ101 Page 5 May. 5/16 May. 5/16
2. Material Information None.
Printed in Great Britain RB.211−72−AJ101 Page 6 May. 5/16 May. 5/16
3. Accomplishment Instructions A. On-wing (Mount Lug Forging LE and Cutback Areas Inspection) WARNING: YOU MUST BE CAREFUL WHEN YOU WORK ON THE ENGINE AFTER THE ENGINE IS SHUTDOWN. THE ENGINE CAN STAY HOT FOR UP TO ONE HOUR.
WARNING: YOU MUST NOT TOUCH HOT PARTS WITHOUT APPLICABLE GLOVES. HOT PARTS CAN CAUSE INJURY. IF YOU GET AN INJURY, PUT IT IN COLD WATER FOR 10 MINUTES.
THEN GET MEDICAL AID.
CAUTION: IN ORDER TO REDUCE THE POTENTIAL FOR MULTIPLE ENGINES IN-FLIGHT
SHUTDOWN, POWER LOSS, OR OTHER ANOMALY DUE TO MAINTENANCE ERROR,
ROLLS-ROYCE RECOMMENDS THAT ADDITIONAL CONTROLS ARE APPLIED IN ORDER TO ENSURE THAT MAINTENANCE TASKS HAVE BEEN COMPLETED AS DEFINED.
MAINTENANCE GUIDELINES SHOULD BE REVISED, WHERE POSSIBLE, TO PROMOTE THIS RECOMMENDATION.
(1) To get access to the Mount Lug Forging LE and cutback areas.
(a) Open the Fan Cowl Doors in accordance with AMM Task 71-13-00, Maintenance Practices to get access.
(b) Make the Thrust Reverser unserviceable for maintenance in accordance with AMM Task 78-30-00, Deactivation/Activation.
WARNING: YOU MUST MAKE THE THRUST REVERSER UNSERVICEABLE (INSTALL AND
SAFETY THE INHIBITION DEVICE) BEFORE YOU DO WORK ON OR AROUND THE THRUST REVERSER. IF YOU DO NOT INSTALL AND SAFETY THE INHIBITION
DEVICE, THERE IS A RISK THAT THE THRUST REVERSER CAN OPERATE ACCIDENTALLY. THIS CAN CAUSE INJURY TO PERSON AND/OR DAMAGE TO THE EQUIPMENT.
(c) Open the Exhaust Cowl Doors in accordance with the AMM, Task 78-26-00, Maintenance Practices, Opening/Closing of the Fan Exhaust Cowl or Thrust Reverser.
(d) Remove the Exhaust Nozzle to allow access to the rear of the TBH in accordance with AMM, Task 78-11-41-000-801-A, Removal of the Exhaust Nozzle.
(e) Remove the Aft Exhaust Plug in accordance with AMM, Task 78-11-42-000-804-A, Removal of the Aft Exhaust Plug.
Printed in Great Britain RB.211−72−AJ101 Page 7 May. 5/16 May. 5/16
(f) Remove the Forward Exhaust Plug in accordance with AMM, Task 78-11-42-000-803-A, Removal of the Forward Exhaust Plug.
NOTE: Steps (d) to (f) are optional tasks intended to improve access to the TBH. If suitable access to complete the FPI inspection can be gained without performing some or all of Tasks (d) to
(f) then they are not required. In any case, Tasks (d) to (f) will need to be accomplished if the FRSH741 repair is to be performed, as per instructions in section 3.A.(3).
(g) Use appropriate staging and platforms to gain access to the Tail Bearing Housing.
(2) Processing the Penetrant Test Panel WARNING: PROTECTIVE GLOVES AND SAFETY GLASSES MUST BE WORN AT ALL TIMES DURING THE INSPECTION. IF YOU GET AN INJURY, SEEK MEDICAL AID IMMEDIATELY.
(a) The OMat 677 - penetrant test panel must be processed at the beginning of each shift and viewed in each Engine that is to be inspected during the shift in order to ensure that the test environment and materials are acceptable.
(b) Ensure the OMat 677 - penetrant test panel is clean and there is no residual fluorescence.
(c) Cover the region of the Engine to be inspected with a dark non-reflective cover in order to reduce the white light levels in the leading edge inspection area.
(d) Apply OMat 632 penetrant to the OMat 677 - penetrant test panel by sponge applicator or brush. The penetrant must be dispensed from a sealed aerosol can and any unused penetrant must go to waste following the inspection.
(e) Leave the penetrant in contact with the panel for 20 minutes.
(f) After the 20 minutes contact time, take the OMat 677 penetrant test panel inside the darkened area to process. Allow 3 minutes for eye adaptation to the low light levels.
(g) Remove the excess penetrant from the panel surface by wiping thoroughly with a clean, dry OMat 2/101 - lint free cloth whilst illuminating the panel with UV light.
(h) Soak a clean OMat 2/101 - lint free cloth in water and then gently squeeze the excess water out to reduce the flow of water on the panel surface.
Printed in Great Britain RB.211−72−AJ101 Page 8 May. 5/16 May. 5/16
(i) Whilst illuminating the OMat 677 - penetrant test panel with UV light, wipe off the penetrant with the wet cloth before immediately wiping over with a clean, dry OMat 2/101 lint free cloth. Repeat this process using the minimum application necessary to achieve acceptable background fluorescence.
(j) Ensure that the panel is dry by wiping with a clean, dry OMat 2/101 lint free cloth.
(k) Apply a light, even coating of OMat 617 - non-aqueous wet developer from a sealed aerosol can to the OMat 677 - penetrant test panel.
(l) Allow 10 minutes contact time for the developer prior to inspecting the panel.
(m) Ensure there are no white light sources or fluorescent items (including clothing) within the darkened area.
(n) Hold the OMat 677 - penetrant test panel alongside the leading edge of the Top Core Vanes and illuminate it with UV light.
(o) Inspect the OMat 677 - penetrant test panel and check the visible indications match the control photograph for that panel.
(p) If the panel matches the photograph then the inspection materials and environment are acceptable and the inspection can be performed.
(q) Repeat steps (m) to (p) for each engine to be inspected during the shift. Ensure that the inspection area is darkened for each engine.
(r) Restore the OMat 677 - penetrant test panel to a completely clean condition and ensure there is no residual fluorescence and store in acetone.
(3) Carry out the Inspection of the Mount Lug Forging LE and Cutback Areas.
WARNING: PROTECTIVE GLOVES AND SAFETY GLASSES MUST BE WORN AT ALL TIMES DURING THE INSPECTION. IF YOU GET AN INJURY, SEEK MEDICAL AID IMMEDIATELY.
(a) Clean the inspection areas (See Fig.1) with a clean OMat 2/101 - lint free cloth moistened with OMat 150 - acetone.
(b) Discard the soiled cloth after use Printed in Great Britain RB.211−72−AJ101 Page 9 May. 5/16 May. 5/16
(c) Repeat the swabbing using fresh OMat 150 - acetone and a fresh OMat 2/101 - lint free cloth until all deposits have been removed.
NOTE: THE INSPECTION SURFACE, MUST BE CLEAN, DRY AND FREE FROM SOILS,
OIL, GREASE, PAINT, COATINGS, CORROSION PRODUCTS, SCALE,
SMEARED METAL, WELDING FLUX, CHEMICAL RESIDUES OR ANY OTHER
MATERIALS THAT COULD PREVENT PENETRANT FROM ENTERING A
DISCONTINUITY, AFFECT PROCESS PERFORMANCE OR PRODUCE AN UNACCEPTABLE BACKGROUND.
(d) Allow 5 minutes for the area to completely dry prior to penetrant application.
(e) Apply OMat 632 penetrant to the inspection areas in Fig.1 The penetrants must be dispensed from a sealed aerosol can and any unused penetrant must go to waste.
(f) Ensure that the inspection areas are fully covered with penetrant with the aid of the UV lamp and mirror.
(g) Leave the penetrant in contact with the components for 20 minutes.
NOTE: THE PENETRANT CONTACT TIME MUST NOT EXCEED 1 HOUR. IF IT DOES THE PENETRANT MUST BE REAPPLIED AND 5 MINUTES CONTACT TIME ALLOWED.
(h) After the 20 minutes contact time, remove the excess penetrant from the inspection surfaces by wiping thoroughly with a clean OMat 2/101 - lint-free cloth.
(i) Soak a clean OMat 2/101 - lint-free cloth in water and then gently squeeze the excess water out to reduce the flow on the component surface.
(j) Whilst illuminating the inspection area with UV light, wipe off the penetrant with the wet cloth before immediately wiping over with a clean, dry OMat 2/101 lint-free cloth. Repeat this process using the minimum application necessary to achieve acceptable background fluorescence.
(k) Ensure that the inspection area is dry by wiping with a dry OMat 2/101 lint-free cloth.
(l) Apply a light, even coating of OMat 617 - non-aqueous wet developer from a sealed aerosol can to the inspection areas.
(m) Allow a minimum of 10 minutes and a maximum of 15 minutes contact time for the developer prior to inspection.
(n) Cover the region of the engine with a dark non-reflective cover in order to reduce the white light levels.
Printed in Great Britain RB.211−72−AJ101 Page 10 May. 5/16 May. 5/16