Copy · VSB ERPS06M-29-22 R01 · 25 pages

© UTC Aerospace Systems. Filed by the FAA in regulations.gov docket FAA-2018-0764; AD 2018-23-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'a71bfdf3c8f43e109afd2f804c3c531b232029564968dadb8b506846c8f4246b'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 1 of 25

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company

EMERGENCY HYDRAULIC POWER - RAM AIR TURBINE MODULE - CHECK/REPLACE PUMP

PROPRIETARY THIS DOCUMENT IS THE PROPERTY OF UTC AEROSPACE SYSTEMS. YOU MAY NOT POSSESS, USE, COPY OR DISCLOSE THIS

DOCUMENT OR ANY INFORMATION IN IT, FOR ANY PURPOSE, INCLUDING WITHOUT LIMITATION, TO DESIGN, MANUFACTURE OR REPAIR PARTS, OR OBTAIN ANY GOVERNMENT APPROVAL TO DO SO, WITHOUT UTC AEROSPACE SYSTEMS’S EXPRESS WRITTEN PERMISSION. NEITHER RECEIPT NOR POSSESSI ON OF THIS DOCUMENT ALONE, FROM ANY SOURCE, CONSTITUTES SUCH PERMISSION. POSSESSION, USE, COPYING OR DISCLOSURE BY ANYONE WITHOUT UTC AEROSPACE SYSTEMS’S EXPRESS WRITTEN PERMISSION IS NOT AUTHORIZED AND MAY RESULT IN CRIMINAL AND/OR CIVIL LIABILITY.

U.S. EXPORT CLASSIFICATION: NOT SUBJECT TO REGULATIONS (NSR)

REVISIONS Revision 1 This revision adds a Parker part number reference to each Hamilton Sundstrand hydraulic pump part number throughout the service bulletin. Wording was changed in the Materials Information section to indicate that the pump replacement kit is available from Hamilton Sundstrand. A table reference and an identification plate reference were also corrected.

Units previously modified according to this bulletin do not require remodification according to this bulletin revision.

This bulletin has been reproduced in its entirety. Discard the bulletin you now have and replace it with this copy. The tabulation below is provided for record keeping and traceability of bulletin issues.

Issue Date Basic Mar 17/17 Revision 1 Jun 27/17

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 2

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data

1. PLANNING INFORMATION A. Effectivity

(1) The Hamilton Sundstrand Ram Air Turbine (RAT) Modules, Model ERPS06M, all serial numbers that are listed below:

B. Concurrent Requirements

(1) Hamilton Sundstrand Service Bulletins ERPS06M-29-21 (Check/Replace Actuator) and ERPS06M-29-19 (Check/Replace Pump) must be incorporated prior to, or in conjunction with this bulletin. The RAT module numbers with a concurrent requirement are listed below:

C. Reason

(1) RAT modules with the part numbers iden tified above may contain a hydraulic pump assembled with nonconforming pistons. These pistons in combination with assembly and test operations may result in piston seizure within the cylinder bores and cause failure of the pump to provide required pressure. Replacing hydraulic pumps that may have been assembled with nonconforming pistons, with one containing updated pistons, will reduce the risk of piston seizure in the cylinder bores. Incorporation of this bulletin will provide improved reliability of the RAT module.

(2) For RAT modules that do not contain a hydraulic pump that was assembled with nonconforming pistons, incorporation of this bulletin (to reidentify the hydraulic pump) will let the RAT module advance to a new part number.

(3) This service bulletin introduces the following new Hamilton Sundstrand part number RAT modules. These RAT modules are equipped with the hydraulic pump PN 5917648 (Parker PN 4207905) (which has been reidentified), hydraulic pump PN 5917649 (Parker PN 4207906) (which has been modified), or hydraulic pump PN 5916485 (Parker PN 4207903) (which is not affected by this retrofit).

RAT Module Part Number 1702934E 768084B 770952F 766351B 770379B RAT Module Part Number 766351 770379A 770952D 1702934C 766351A 770952 770952E 1702934D 768084 770952A 1702934 768084A 770952B 1702934A 770379 770952C 1702934B

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 3

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data D. Description

(1) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be “suspect”, this bulletin gives the instructions to replace the hydraulic pump, identify the RAT module, and test the RAT module.

NOTE: “Suspect” refers to hydraulic pumps that need to be replaced because they may have been assembled with nonconforming pistons. A list of “suspect” hydraulic pump serial numbers can be found in Table 9 of this bulletin.

(2) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be “not suspect”, this bulletin gives the instructions to identify the hydraulic pump and the RAT module.

NOTE: “Not suspect” refers to hydraulic pumps that are not found in Table 9.

(3) For hydraulic pump PN 5916485 (Parker PN 4207903) (which is not affected by this retrofit), this bulletin gives instructions to identify the RAT module.

E. Compliance

(1) Incorporation of this service bulletin is mandatory and should be accomplished at the earliest opportunity.

F. Approval

(1) The technical content of this document is approved under the authority of DOA ref.

EASA.21J.031.

G. Manpower

(1) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be “suspect”, approximately 14.0 man-hours are required to replace the hydraulic pump, identify the RAT module, and test the RAT module.

(2) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be “not suspect”, approximately 1.0 man-hour is required to identify the hydraulic pump and the RAT module.

(3) For hydraulic pump PN 5916485 (Parker PN 4207903) (which is not affected by this retrofit), approximately 0.5 man-hour is required to identify the RAT module.

H. Weight and Balance

(1) None New RAT Module Part Number 1702934F 768084C 770952G 766351C 770379C

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 4

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data I. Electrical Load Data

(1) Not changed J. Software Accomplishment Summary

(1) Not Applicable K. References

(1) Hamilton Sundstrand Component Maintenance Manual (CMM) 29-21-31

(2) Hamilton Sundstrand Standard Practices Manual (SPM) 20-00-00

(3) Applicable Airbus Aircraft Maintenance Ma nual (AMM) and Airbus Illustrated Parts Catalog (IPC)

(4) Hamilton Sundstrand Engineering Ch anges 16A240, 16A240A, 16C901 and 16C901A

(5) Parker Hannifin GmbH Component Maintenance Manual (CMM) 29-21-34

(6) Parker Hannifin GmbH Service Bulletin 42079-29-503

(7) Equipment Definition Evolution Sheet (EDES) A334RAT05-008

(8) This service bulletin is subject to airc raft modification N° 206604 D54046 (classified major) and is covered by aircraft service bulletin N° A330-29-3130, A340-29-4098.

(9) Under no circumstances shall the modified equipment, resulting from the application of this service bulletin, be installed on the aircraft type unless its aircraft service bulletins are approved.

L. Other Publications Affected

(1) Hamilton Sundstrand CMM 29-21-31 and Parker Hannifin GmbH CMM 29-21-34 will be revised to incorporate this bulletin.

M. Interchangeability or Intermixability of Parts

(1) Refer to the Aircraft Service Bulletin Numbers A330-29-3130 or A340-29-4098 for interchangeability or intermixability of parts.

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 5

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data

2. MATERIAL INFORMATION A. Material - Price and Availability

(1) In order to agree on a well-organized upgrade process, operators should contact the Parker Hannifin GmbH Customer Support Organization in Germany before removing a “suspect” hydraulic pump.

(2) The contact information and shipment addr ess for Parker Hannifin GMBH is as follows (also refer to Parker Hannifin GMBH Service Bulletin 42079-29-503):   NOTE: All e-mail messages should be sent to both contact people listed below:  Contact 1:  Andreas Flach, Customer Service Administrator E-mail: andreas.flach@parker.com Telephone: +49 6134 204 110 Fax: +49 6134 204 188  Contact 2:  Tim Verschoof, Junior Business Development Manager E-mail: tim.verschoof@parker.com Telephone: +49 6134 204 184 Fax: +49 6134 204 188   Shipment Address: Parker Hannifin GmbH Service Center Wiesbaden Lorenz-Schott-Strasse 9 D-55252 Mainz-Kastel Germany

(3) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be “suspect”, a limited number of hydraulic pumps will be placed in a rotable pool for operator use. These will be available to operators for exchange, based upon availability. In addition, the A330/ A340 RAT pump replacement parts kit 914-157 (refer to Table 3 of this bulletin) is available from Hamilton Sundstrand Commercial Spares.  Requests for rotable units should be sent (along with fleet data) in an e-mail message to Hamilton Sundstrand Retrofit Management as follows:   To: Stephen Carew (stephen.carew@utas.utc.com)  Subject: SB ERPS06M-29-22 Check/Replace Pump

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 6

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data

(4) For hydraulic pump, 5916430 (Parker PN 4207904), found to be “not suspect”, the hydraulic pump temporary identification plate (refer to Table 1 and Table 4 of this bulletin) will be supplied by Parker Hannifin GmbH. Operators should place a “nocharge” purchase order to Parker Hannifin GmbH, that includes sufficient quantities of temporary identification plates for their entire fleet (with the understanding that not all of the temporary identification plates may be required).

(5) Hamilton Sundstrand will suppl y the replacement parts required for accomplishment of this bulletin on a no-charge basis to operators and customer designees. The replacement parts are currently available in limited quantities (refer to Table 3 of this bulletin for the parts breakdown). Operators and customer designees may place a single “no-charge” order to Hamilton Sundstrand. These orders should be forwarded to the assigned Hamilton Sundstrand Commercial Spares Administrator (or fax to +1- 860-660-7557, if the responsible Administrator is not known). In addition, the Hamilton Sundstrand website at www.customers.utcaerospacesystems.com can be used to contact the Commercial Spares group. Upon entering the website, select “Customer Service” followed by “Spare Parts” for other contact and order processing options that are available. Orders must clearly reference fleet requirements; noting the service bulletin number, serial numbers of affected units, total quantity of parts, and anticipated incorporation schedule. Hamilton Sundstrand will acknowledge the order with an established delivery rate.

(a) The two methods used to determine order quantities, based on available fleet records, are listed below. In each case, Hamilton Sundstrand will acknowledge the operator order with an established delivery rate.

1 For operators who can establish a listing of affected units in their fleet through the review of records, Hamilton Sundstrand requests that a single purchase order be submitted for the total parts requirement. To minimize processing delays, orders must clearly reference the service bulletin number, serial numbers of affected units, total quantity of parts, and anticipated incorporation schedule. [To calculate the total quantity of parts to order, refer to Table 1, Table 3, Table 4, or Table 6 of this bulletin for the parts breakdown on a per unit basis.]  If an operator finds that additional quantities of parts are required, they should contact Hamilton Sundstrand with the details so that arrangements can be made to supply them with the additional quantities.

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 7

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data 2 For operators who cannot establish the total fleet requirements through the review of records, Hamilton Sundstrand requests that an initial purchase order be submitted to support 25 percent of their operating fleet or two aircraft, whichever is greater. This will allow an operator to have parts available on shelf in the event that an affected unit is found while performing inspections in accordance with this service bulletin. To minimize processing delays, orders must clearly reference the service bulletin number and quantity of parts. [To calculate the total quantity of parts to order, refer to Table 1, Table 3, Table 4, or Table 6 of this bulletin for the parts breakdown on a per unit basis.]  If the initial quantity of parts is used and aircraft remain to be inspected, operators should contact Hamilton Sundstrand with the details so that arrangements can be made to supply additional parts.

B. Industry Support Information

(1) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be "suspect":

(a) Hamilton Sundstrand will give a maximum labor allowance of 14.0 man-hours multiplied by the operator's current approved hourly rate for replacement of the pump on the aircraft and for on-wing testing.

(2) For hydraulic pump PN 5916430 (Parker PN 4207904), found to be "not suspect":

(a) Hamilton Sundstrand will also give a maximum labor allowance of 1.0 man-hour multiplied by the operator's current approved hourly rate for accomplishment of this bulletin.

(3) For hydraulic pump PN 5916485 (Parker PN 4207903):

(a) Hamilton Sundstrand will also give a maximum labor allowance of 0.5 man-hour multiplied by the operator's current approved hourly rate for accomplishment of this bulletin.

(4) Operators should forward a claim for labor reimbursement to warrantyclaims@utas.utc.com or to Warranty Administration, 4747 Harrison Ave., Rockford, IL 61108-7929, USA, MS 218-6. The claim should reference the service bulletin number, serial numbers modified, date modified, total hours, and approved labor rate.

(5) Hamilton Sundstrand will incorporate this mo dification into returned units at no charge.

Operators should contact their applicable UTC Aerospace Systems Repair Facility for scheduling information. For the repair facility contact information, operators should use the Hamilton Sundstrand website at www.utcaerospacesystems.com. (Upon entering the website, select “Customer Service” followed by “Repair Services”. Click on the link to search for the UTC Aerospace Systems Repair Facility that can repair your part. You will be able to search based on the part number.)

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 8

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data C. Material Necessary For Each Unit

(1) Refer to Hamilton Sundstrand CMM 29-21-31 for expendable parts information and consumable materials.

(2) Material to be Purchased Table 1 Table 1 Note 1: Parker Hannifin GmbH will suppl y the noted part at no charge (refer to paragraph

2.A.(4) of this bulletin for details).

Table 2 Table 1 New Parts Required [On the Aircraft, Non-Suspect Hydraulic Pump, PN 5916430 (Parker PN 4207904)] New Part Number Keyword Old Part Number Qty Unit Price Special Instructions/ Disposition 48683 (Parker PN) Temporary Identification Plate None 1 (Note 1) If the hydraulic pump is not suspect, install new Table 2 New Material Required [On the Aircraft, Non-Suspect Hydraulic Pump, PN 5916430 (Parker PN 4207904)] Material Name and Number Source Use Lockwire, MS20995C32 (or equivalent) Commercially Available If the hydraulic pump is not suspect, use to install the hydraulic pump temporary identification plate

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 9

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data Table 3 Table 3 Note 1: The noted parts are contained in the A330/A340 RAT pump replacement parts kit 914-157 (refer to paragraph 2.A.(3) of this bulletin for details).

Table 3 Note 2: A limited number of hydraulic pumps will be provided in a rotable pool for operator use (refer to paragraph 2.A.(3) for details).

Table 3 New Parts Required [On the Aircraft, Suspect Hydraulic Pump, PN 5916430 (Parker PN 4207904)] New Part Number Keyword Old Part Number Qty Unit Price Special Instructions/ Disposition 5917649 (Parker PN 4207906) Hydraulic Pump 5916430 (Parker PN 4207904) 1 (Note 2) If suspect, remove old, install new Same O-Ring NAS1612-20 2 (Note 1) If installed, remove old, install new Same Backup Ring MS28774-023 4 (Note 1) Remove old, install new Same O-Ring NAS1611-023 2 (Note 1) Remove old, install new Same Backup Ring MS28774-021 4 (Note 1) Remove old, install new Same O-Ring NAS1611-021 2 (Note 1) Remove old, install new Same Backup Ring MS28774-014 4 (Note 1) Remove old, install new Same O-Ring NAS1611-014 2 (Note 1) Remove old, install new Same O-Ring NAS1611-042 1 (Note 1) Remove old, install new 5912160 Radial Seal 5912160 5910299 1 (Note 1) Remove old, install new 914-157 A330/A340 RAT Pump Replacement Parts Kit None 1 (Note 1) Install new

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 10

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data Table 4 Table 4 Note 1: Parker Hannifin GmbH will suppl y the noted part at no charge (refer to paragraph

2.A.(4) of this bulletin for details).

Table 4 Note 2: The noted modification plate and identification plates are only required if the RAT module is in the shop.

Table 4 Note 3: Hamilton Sundstr and will supply or install the noted parts at no charge (refer to paragraph 2.A.(5) of this bulletin for details).

Table 4 New Parts Required [In the Shop, Non-Suspect Hydraulic Pump, PN 5916430 (Parker PN 4207904)] New Part Number Keyword Old Part Number Qty Unit Price Special Instructions/ Disposition 48683 (Parker PN) Temporary Identification Plate None 1 (Note 1) If the hydraulic pump is not suspect, install new Same (Note 2) Modification Plate 761251 1 (Note 3) Remove old and install new 1700217-17 (Note 2) Identification Plate 1700217-14 1 (Note 3) Remove old and install new (for RAT module PN 770379B) 1700217-18 (Note 2) Identification Plate 1700217-15 1 (Note 3) Remove old and install new (for RAT module PN 770952F) 1700217-19 (Note 2) Identification Plate 1700217-16 1 (Note 3) Remove old and install new (for RAT module PN 1702934E) Same (Note 2) Identification Plate 755595 1 (Note 3) Remove old and install new (for RAT modules PN 768084B and 766351B)

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 11

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data Table 5 Table 5 New Material Required [In the Shop, Non-Suspect Hydraulic Pump, PN 5916430 (Parker PN 4207904)] Material Name and Number Source Use Lockwire, MS20995C32 (or equivalent) Commercially Available If the hydraulic pump is not suspect, use to install the hydraulic pump temporary identification plate

Original Issue Date: Mar 17/17 Revision 1: Jun 27/17 ERPS06M-29-22 Page 12

SERVICE BULLETIN Hamilton Sundstrand Corporation, a UTC Aerospace Systems Company UTC AEROSPACE SYSTEMS PROPRIETARY - Subject to the restriction on the title or cover page.

This document does not contain any export controlled technical data Table 6 Table 6 New Parts Required (In the Shop, Suspect Hydraulic Pump) New Part Number Keyword Old Part Number Qty Unit Price Special Instructions/ Disposition 5917649 (Parker PN 4207906) Hydraulic Pump 5916430 (Parker PN 4207904) 1 (Note 1) If suspect, remove old, install new Same O-Ring NAS1612-20 2 (Note 1) If installed, remove old, install new Same Backup Ring MS28774-023 4 (Note 1) Remove old, install new Same O-Ring NAS1611-023 2 (Note 1) Remove old, install new Same Backup Ring MS28774-021 4 (Note 1) Remove old, install new Same O-Ring NAS1611-021 2 (Note 1) Remove old, install new Same Backup Ring MS28774-014 4 (Note 1) Remove old, install new Same O-Ring NAS1611-014 2 (Note 1) Remove old, install new Same O-Ring NAS1611-042 1 (Note 1) Remove old, install new Same Radial Seal 5912160 1 (Note 1) Remove old, install new Same (Note 2) Modification Plate 761251 1 (Note 1) Remove old and install new 1700217-17 (Note 2) Identification Plate 1700217-14 1 (Note 1) Remove old and install new (for RAT module PN 770379B) 1700217-18 (Note 2) Identification Plate 1700217-15 1 (Note 1) Remove old and install new (for RAT module PN 770952F)

Pages 13–24 of 25