On this page
Text · 9OCR
This text is OCR from a scan. OCR can misread letters and numbers. © UTC Aerospace Systems. Filed by the FAA in regulations.gov docket FAA-2017-1120, the docket of AD 2018-07-13. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'e85b18576e10bed48272c8403ff16270a1ebdb292e9886442f7bc70fe595361c' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'e85b18576e10bed48272c8403ff16270a1ebdb292e9886442f7bc70fe595361c' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
UTC Aerospace Systems Landing Systems - Wheels & Brakes Goodrich Corporation 101 Waco Street P.O. Box 340 SERVICE BULLETIN U.S.A Troy, Ohio 45373 Tel: +1 937 339 3811 e-mail: awb.techpubs@utas.utc.com TITLE: Landing Gear - Main Brake Assembly, - Introduction of an Inspection Procedure to Make Sure the Wear Indicator Pins were Set Correctly.
TRANSMITTAL: This section transmits Revision 1 of Service Bulletin 2-1706-1-32-1.
Revised Figure 1. Changed the wear limit dimensions on the wear Indicator pins. The correct wear limits are 1.65 inches (41,9 mm) maximum length.
Revised section 3.A. (4) and page 9. Changed the e-mail Address. The correct e-mail address for the return form is crc@utas.utc.com.
Revision History Revision 0 June 30, 2017 Revision 1 July 18, 2017
1. PLANNING INFORMATION A. SB Effectivity This Service Bulletin is applicable to Goodrich Brake Assemblies, P/N 2-1706-1, with Serial Numbers Listed in Table 1.
B. Concurrent Requirements Not Applicable.
C. Reason Some wear indicator pins for Brake Assembly, P/N 2-1706-1, used on Cessna Citation Mustang Aircraft may not accurately show brake wear.
D. Description This Service Bulletin gives instructions to measure the wear indicator pins to find if they were set correctly (refer to Figure 1).
This Service Bulletin also gives instructions for removal of in-service brake assemblies and spare brake assemblies with incorrect wear indicator pins.
E. Compliance Recommendation This Service Bulletin must be accomplished in 90 days, 75 landings or less to make sure a brake assembly is removed from service for a shop visit when either of the two wear indicator pins is more than 1.65 inches (41.9 mm) in length. Refer to Figure 1.
EXPORT CLASSIFICATION U.S. Export Classification: EAR 9E991 1188 Initial Issue: Jun 30/17 2-1706-1-32-1 Revision 1: Jul 18/17 Page 1 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY **Printed copies are considered UNCONTROLLED - Verify current issue before use**
UTC Aerospace Systems Landing Systems - Wheels & Brakes Goodrich Corporation 101 Waco Street P.O. Box 340 SERVICE BULLETIN T.S. AChio 45373 Tel: +1 937 339 3811 e-mail: awb.techpubs@utas.utc.com F. Approval This Service Bulletin has Goodrich engineering approval and has Cessna engineering concurrence. This Service Bulletin contains no modification data that changes the approved configuration and therefore no government approval or regulatory agency approval is necessary.
G. Manpower Approximately 10 minutes is necessary to do the measurement inspection of the wear indicator pins.
H. Weight and Balance None.
I. Electrical Load Data Not Changed.
J. Software Accomplishment Summary Not Applicable.
K. References Goodrich Component Maintenance Manual (CMM) 32-46-77.
L. Other Publications Affected Goodrich Component Maintenance Manual (CMM) 32-46-77.
M. Interchangeability or Intermixability of Parts Not Applicable.
1188 Initial Issue: Jun 30/17 2-1706-1-32-1 Revision 1: Jul 18/17 Page 2 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY U.S. Export Classification: EAR 9E991 **Printed copies are considered UNCONTROLLED - Verify current issue before use**
UTC Aerospace Systems Goodrich Corporation Landing Systems - Wheels & Brakes 101 Waco Street P.O. Box 340 SERVICE BULLETIN Troy, Ohio 45373 Yes: +1 937 339 3811 e-mail: awb.techpubs@utas.utc.com
2. MATERIAL INFORMATION A. Material - Price and Availability Not Applicable.
B. Industry Support Information Not Applicable.
C. Material Necessary for Each Component
(1) Material to be Purchased:
Not Applicable.
(2) Material Supplied by the Operator:
Yellow Paint.
D. Material Necessary for Each Spare Not Applicable.
E. Reidentified Parts Not Applicable.
F. Tooling - Price and Availability Not Applicable.
1188 Initial Issue: Jun 30/17 2-1706-1-32-1 Revision 1: Jul 18/17 Page 3 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY U.S. Export Classification: EAR 9E991 **Printed copies are considered UNCONTROLLED - Verify current issue before use**
UTC Aerospace Systems Landing Systems - Wheels & Brakes Goodrich Corporation 101 Waco Street P.O. Box 340 SERVICE BULLETIN Troy, Ohio 45373 U.S.A..
Tel: +1 937 339 3811 e-mail: awb.techpubs@/utas.utc.com
3. ACCOMPLISHMENT INSTRUCTIONS A. Measure the wear indicator pins for brake serial numbers listed in Table 1, as follows:
NOTE: Brake assemblies with serial numbers listed in Table 1 are subject to this Service Bulletin. For brake assemblies that have serial numbers with an "A" at the end, it is not necessary to follow the instructions in this Service Bulletin.
NOTE: At the next shop visit, affected brake serial numbers per Table 1 will have an "A" stamped after the serial number to indicate the brake has been overhauled and the wear indicator pins have been set correctly.
(1) Measure the full length of each wear indicator pin from the surface of the pressure plate assembly (refer to Figure 1).
If one of the two wear indicator pins is 1.65 inches (41,9 mm) or more, remove the brake assembly from service and contact Textron Aviation for an exchange of the brake assembly.
(3) If the two wear indicator pins are 1.65 inches (41,9 mm) or less, paint the end of the two wear indicator pins yellow (refer to Figure 1).
(4) Complete the attached FORM for all brake serial numbers inspected. Return the form to crc@utas.utc.com 1188 Initial Issue: Jun 30/17 2-1706-1-32-1 Revision 1: Jul 18/17 Page 4 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY U.S. Export Classification: EAR 9E991 **Printed copies are considered UNCONTROLLED - Verify current issue before use**
UTC Aerospace Systems Landing Systems - Wheels & Brakes Goodrich Corporation 101 Waco Street P.O. Box 340 SERVICE BULLETIN Troy, Ohio 45373 U.S.A.
Tel: +1 937 339 3811 e-mail: awb.techpubs@utas.utc.com
PAINT END OF PIN YELLOW (41,9)
MA LENGTH
PRESSURE PLATE
•NOTE DIMENSIONS SH Figure 1. Measure Length of the Wear Indicator Pin 1188 Initial Issue: Jun 30/17 2-1706-1-32-1 Revision 1: Jul 18/17 Page 5 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY U.S. Export Classification: EAR 9E991 **Printed copies are considered UNCONTROLLED - Verify current issue before use**
UTC Aerospace Systems Landing Systems - Wheels & Brakes Goodrich Corporation 101 Waco Street P.O. Box 340 Troy, Ohio 45373 SERVICE BULLETIN U.S.A.
Tel: +1 937 339 3811 e-mail: awb.techpubs@utas.utc.com Table 1. List of Affected Brake Assembly Serial Numbers (Sheet 1 of 3) 0043 0044 0045 0046 0049 0050 0051 0054 0055 0057 0058 0060 0062 0063 0064 0066 0067 0068 0069 0073 0074 0075 0076 0078 0079 0080 0081 0082 0084 0085 0086 0087 0088 0101 0102 0103 0104 0105 0106 0107 0108 0109 0114 0115 0119 0120 0121 0122 0123 0124 0125 0126 0129 N/A 0131 0132 0133 0134 0135 0136 0137 0139 0141 0142 0143 0144 0145 9+10 0148 0149 0151 0154 0156 0158 0159 0162 0164 0165 0167 0168 0169 0170 0172 0173 0174 0176 0177 0178 0179 0181 0182 0183 0184 0185 0186 0187 8810 0189 0190 0191 0192 0193 0164 0195 0197 0198 0200 LOZO 9020 LOZ0 0208 6020 0120 0211 0213 0214 0215 0217 0218 0219 0220 EZZO IZZO 0225 0226 0227 8ZZ0 0229 0230 0231 0232 0235 0236 0237 0239 0240 0241 0242 0243 ++ZO 0246 0247 0250 0251 0252 0254 9920 0256 0258 0259 0261 0264 0265 0266 1920 0268 0269 0270 0271 0273 0274 0275 0277 0278 0279 0295 0297 0298 0299 0080 0301 0302 0303 0304 0306 0307 0308 0309 0310 0311 0314 0316 0317 0318 0319 0320 0321 0322 0323 0324 0325 0326 0327 0329 0330 N/A 0333 0334 0337 0338 0339 0340 0341 0346 0347 0348 0349 0352 0354 0356 0357 0358 0359 0360 0361 0362 0363 0364 0365 9980 0367 0368 0369 0371 0372 0373 0376 0378 6280 08€0 0382 0384 0385 0386 0387 0388 0389 0390 0391 0392 0393 0395 0396 0397 0398 0399 0400 1188 Initial Issue: Jun 30/17 2-1706-1-32-1 Revision 1: Jul 18/17 Page 6 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY U.S. Export Classification: EAR 9E991 **Printed copies are considered UNCONTROLLED - Verify current issue before use**
UTC Aerospace Systems Landing Systems - Wheels & Brakes Goodrich Corporation 101 Waco Street P.O. Box 340 Troy, Ohio 45373 SERVICE BULLETIN U.S.A.
Tel: +1 937 339 3811 e-mail: awb.techpubs@utas.utc.com Table 1. List of Affected Brake Assembly Serial Numbers (Sheet 2 of 3) 0401 0402 0403 0405 0407 0409 0410 0411 0415 0416 0417 0418 0419 0421 0422 0423 0424 0425 0426 0427 0428 0429 0430 0431 0433 0434 0435 0436 0437 0438 0439 0443 0444 0446 0447 0448 0450 0451 0452 0453 0454 0455 0462 0463 0465 0467 0468 0469 0472 0476 0477 0478 0479 0480 0483 0485 0486 0487 0488 0490 0494 0497 0498 0499 0500 1OS0 2090 2090 0504 0505 0508 0509 0510 0511 0514 0516 0517 0520 0522 0523 0524 0527 0528 0529 0530 0534 0535 0536 0538 0539 0541 0545 0546 0548 0549 0550 0551 0555 0557 0558 0561 0563 0567 0570 0571 0572 0574 0575 0576 0577 0578 0579 0580 0582 0583 0584 0585 0587 0589 0592 0593 0594 0596 0599 0600 2090 2090 ₺090 0606 0609 0613 0618 0619 0620 0621 2290 0623 0624 0625 0626 2290 0628 0630 0634 0635 9€90 0637 0638 0641 0642 0648 0649 0650 0651 0655 9990 0663 0664 0667 0669 0671 0672 0682 0683 0688 0689 0691 0692 0693 0694 0695 0696 0697 0702 0704 0705 0706 0707 0710 0711 0712 0713 0714 0715 0716 0717 0718 OZ20 0721 0723 0724 0726 0727 0728 0729 0730 0731 0732 0733 0737 0738 0739 0740 0750 0751 0752 0754 0757 0759 0763 0767 0769 0773 0776 0781 0784 0785 0786 0787 0790 0792 0794 0795 0796 0798 0801 0803 0804 0809 0810 0811 0813 0815 0816 0817 0818 0819 0821 0823 0824 0826 0827 0828 0831 0834 0837 0838 0842 1188 Initial Issue: Jun 30/17 2-1706-1-32-1 Revision 1: Jul 18/17 Page 7 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY U.S. Export Classification: EAR 9E991 **Printed copies are considered UNCONTROLLED - Verify current issue before use**
UTC Aerospace Systems Landing Systems - Wheels & Brakes Goodrich Corporation 101 Waco Street P.O. Box 340 Troy, Ohio 45373 SERVICE BULLETIN U.S.A Tel: +1 937 339 3811 e-mail: awb.techpubs@utas.utc.com Table 1. List of Affected Brake Assembly Serial Numbers (Sheet 3 of 3) 0843 0844 0845 0846 0847 0848 0849 0850 0851 0852 0853 0855 0857 0860 0862 0863 0864 0865 0866 0869 0870 0871 0872 0873 0877 0879 0882 0884 0885 0887 0888 0891 0892 0895 0897 0898 0899 0902 0903 0904 0907 0908 0909 0914 0919 0920 0923 0924 0926 0927 0933 0937 0938 0939 0940 0943 0945 0947 0951 0955 0956 0957 0958 0959 0960 960 0965 9960 0968 0972 0975 0976 0977 0978 0981 0982 0983 0986 0988 0990 0991 0992 0996 0998 1001 1006 1011 1013 1017 1022 1024 1027 1029 1030 1031 1032 LEOL EVOL 1044 1047 1048 1049 1057 1061 990L 290 L 1074P 1768 0061 0061 0071 0194 0449 0553 NOTE: Serial Numbers are not in numerical order 1188 Initial Issue: Jun 30/17 2-1706-1-32-1 Revision 1: Jul 18/17 Page 8 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY U.S. Export Classification: EAR 9E991 **Printed copies are considered UNCONTROLLED - Verify current issue before use**
UTC Aerospace Systems Landing Systems - Wheels & Brakes Goodrich Corporation 101 Waco Streef P.O. Box 340 Troy, Ohio 45373 SERVICE BULLETIN Yes: 41 937 339 3811 e-mail: awb.techpubs@utas.utc.com UTC Aerospace Systems UTC Aerospace Systems Landing Systems Record all data on this form for each affected brake. Return form to UTAS.
Contact Textron Aviation for instructions regarding the brake.
CUSTOMER (COMPANY) NAME:
CUSTOMER ADORESS:
PERSON TO CONTACT (IF NECESSARY):
SIGNATURE:
DATE:
Brake Part Brake Serial No. Aircraft Number Of Wear Indicator Pin Wear Indicator Pin Number Serial No or Tail No. Landings Measurement Measurement Send To: crc@utas.utc.com 1188 Initial Issue: Jun 30/17 2-1706-1-32-1 Revision 1: Jul 18/17 Page 9 of 9
UTC AEROSPACE SYSTEMS PROPRIETARY U.S. Export Classification: EAR 9E991 **Printed copies are considered UNCONTROLLED - Verify current issue before use**