Text
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9e2f5e6c53fe8d07a85f8cce61e29ce4c6bc6c54bd49bf9169ce2920cf33ecf9' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9e2f5e6c53fe8d07a85f8cce61e29ce4c6bc6c54bd49bf9169ce2920cf33ecf9' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ZODIAC AEROSPACE SERVICES
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 PAGE: 1/2
ZODIAC AEROSPACE SERVICES Technical Publication Department
ZODIAC SERVICES EUROPE 61, rue Pierre CURIE CS20001 78373 PLAISIR CEDEX / FRANCE Phone : +33 1 61 34 23 23 Fax : +33 1 30 55 71 61
TPI Web site: http://www.in-services.fr/technical/tpi
TRANSMITTAL SHEET
This Transmittal Sheet applies to the Revision 02, dated 20140625, of Service Bulletin MC10-35-274
REASON FOR REVISION
Airworthiness Directive reference added.
Correction of Zodiac Aerospace UK location.
Correction of Amdt letter
REVISION SEQUENCE
Initial issue : 20140319 Rev01: 20140418 Rev02: 20140625
SERVICE BULLETIN
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 PAGE: 2/2
THIS PAGE INTENTIONALLY LEFT BLANK
ZODIAC AEROTECHNICS AIRCRAFT SYSTEMS | CABIN & COCKPIT SYSTEMS DIVISION OXYGEN SYSTEMS EUROPE (OSE).
61, RUE PIERRE CURIE – CS20001 78373 PLAISIR CEDEX - FRANCE Phone : (33) 01 61 24 23 23 - Fax : (33) 01 30 55 71 61
SERVICE BULLETIN
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 REVISION N°: 2 PAGE: 1/9
TITLE: OXYGEN – HARNESS ASSEMBLY - INSPECTION FOR POTENTIAL
DEFECTIVE COMPONENT
1. PLANNING INFORMATION A. Effectivity
(1) Potential Concerned equipment This Service Bulletin applies to the following Crew Oxygen Mask Regulator fitted with a inflatable harness assembly Part Number (PNR) MXH20-1 or MXH21-1.
PNR HARNESS MC10‐02‐50 MXH21-1 MC10‐02‐155 MXH21-1 MC10‐04‐159 MXH21-1 MC10‐13‐150 MXH20-1 MC10‐15‐151 MXH20-1 MC10‐15‐152 MXH20-1
PNR HARNESS MC10‐15‐157 MXH20-1 MC10‐15‐158 MXH20-1 MC10‐15‐166 MXH20-1 MC10‐15‐171 MXH20-1 MC10‐15‐176 MXH20-1 MC10‐16‐150 MXH20-1
PNR HARNESS MC10‐16‐151 MXH20-1 MC10‐19‐151 MXH21-1 MC10‐25‐154 MXH21-1 MC10‐25‐158 MXH21-1
(2) Affected sub-assembly This Service Bulletin applies to the harness hose equipped PNR 445186 or 445952 fitted on the inflatable harness asse mbly PNR MXH20-1 or MXH21-1 and manufactured between 50 th week of 2008 year (0850S) and 51 th week of 2010 year (1051S).
(3) In the field Crew Oxygen Mask Regulator listed above and equipped with potentially defective harness hose.
(4) Spare parts Defective harness hose equipped PNR 445186 or 445952 or inflatable harness PNR MXH20-1 or MXH21-1 from stock.
B. Concurrent Requirements Affected customers should notify thei r usual Zodiac Services contacts in regards of their location (ZS Europe, ZS UK, ZS Middle East, ZS Asia and ZS Americas).
Customers to provide the list of PNR affected and place the corresponding orders for replacement.
Removed harnesse hoses must be sent in one batch at the end of the retrofit to the ZS work shop from which your area corresponds to.
SERVICE BULLETIN
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 REVISION N°: 2 PAGE: 2/9
C. Reason This Service Bulletin is issued :
- To inform the operators of the potential risk of premature rupture on the inflatable harness.
- To provide instructions for inspection and pr eventive replacement if necessary of potentially defective inflatable harness.
D. Description Based on our internal review and customer feedback, ZODIAC AEROTECHNICS formally INTERTECHNIQUE has identified the potentially defective batches of silicon tubes.
Inflatable harnesses assembled with defective s ilicon tubes have demonstrated an unusually high premature rupture rate.
E. Compliance Incorporation of this Service Bulletin is ma ndatory. (refer to Airworthiness Directive AD No: 2014-0142).
F. Approval This document was established in conformity with the ZODIAC AEROTECHNICS "Alternative Procedures to Design Or ganisation Approval" ref. PGQ-5030 a pproved by the EASA. Technical data were approved by ZODIAC AEROTECHNICS in conformity with § 21A.611 of PART 21.
G. Manpower
(1) 1 technician
(2) Check only : 5 minutes.
(3) Complete Operation : 20 minutes.
H. Weight and Balance None I. Electrical Load Data Not Changed J. Software Accomplishment Summary Not applicable K. References
(1) Component Maintenance Manuals See APPENDIX I L. Publications Affected
(1) Component Maintenance Manuals See APPENDIX I M. Interchangeability Not affected
SERVICE BULLETIN
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 REVISION N°: 2 PAGE: 3/9
2. MATERIAL INFORMATION A. Material – Price and Availability
(1) Material
PNR KEYWORD QTY MXH21-1 INFLATABLE HARNESS 1 Or 445952 HARNESS HOSE EQUIPPED 1 MXH21-31 (1) INFLATABLE HARNESS 1 Or 420B156 (1) HARNESS HOSE EQUIPPED 1 081356 (1) & (2) NAMEPLATE (MXH21-31) 1 417448 (2) CLAMP 1
(1) Post SB MA_B_C_F10-35-260
(2) Necessary when changing harness hose only.
Inflatable harness MXH21-1 (including harness hose equipped PNR 445952) are modified to MXH21-31 (including Harness hose equipped PNR 420B156) due to service bulletin MA_B_C_F10-35-260.
(2) Price On request
(3) Availability Schedule to be agreed with customers.
B. Industry Support Information Not applicable C. Material Necessary fo r Each Component (Unit)
(1) Material to order
PNR KEYWORD QTY ORDER SPECIAL INSTRUCTIONS MXH20-1 INFLATABLE HARNESS 1 MXH21-31 (1) Forward to Zodiac Services maintenance facility* Or 445186 HARNESS HOSE EQUIPPED 1 Or 420B156 (1) Forward to Zodiac Services maintenance facility* MXH21-1 INFLATABLE HARNESS 1 MXH21-1 Forward to Zodiac Services maintenance facility* Or 445952 HARNESS HOSE EQUIPPED 1 445952 Forward to Zodiac Services maintenance facility* MXH21-1 INFLATABLE HARNESS 1 MXH21-31 (1) Forward to Zodiac Services maintenance facility* Or 445952 HARNESS HOSE EQUIPPED 1 Or 420B156 (1) Forward to Zodiac Services maintenance facility*
SERVICE BULLETIN
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 REVISION N°: 2 PAGE: 4/9
PNR KEYWORD QTY ORDER SPECIAL INSTRUCTIONS 417448 (2) CLAMP 1 417448 TO DISCARD
(1) Post SB MA_B_C_F10-35-260
(2) Necessary when changing harness hose only.
* Refer to § 3.D.
D. Material necessary for each spare Not applicable E. Re-identified Parts With indelible ink or an electric pen, write visibly the SB accomplishment by adding of letter “ I“ (Inspected) on the bushing of inflatable harness (See Figure 2).
The marking shall be visible once the harness has been re-installed on the mask.
F. Tooling – Price and Availability Not applicable
3. ACCOMPLISHMENT INSTRUCTIONS A. From the stock :
(1) Inspect the manufacturing date (See Figure 3) of the inflatable harness or harness hose equipped :
- If the manufacturing date is in the specified period above, forward the defective inflatable harness or harness hose equipped to the appropriate Zodiac Services maintenance facility for replacement of the inflatable harness.
B. Inflatable harness mounted on t he Crew Oxygen Mask Regulator :
WARNING : STRICTLY OBEY THE PROCEDURES WHEN YOU DO WORK ON OXYGEN SYSTEM.
DO NOT USE OIL, GREASE OR OTHER LUBR ICANTS MADE FROM PETROL IN THE AREA OF OXYGEN EQUIPMENT. YOU CAN CAUSE A FIRE OR EXPLOSION.
CAUTION : APPLY THIS SB ON CLEAN SURFACE AND WITH CLEAN HANDS.
Prior to using the flow chart to start the on-aircraft action(s), the operator, if he has the possibility, can determine, (e.g. aircraft maintenance logs check) whether the inflatable harness has been replaced, during a maintenance operation, on an oxygen mask regulator installed on the aircraft.
SERVICE BULLETIN
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 REVISION N°: 2 PAGE: 5/9
Stow the Crew Oxygen Mask into its housing Remove the inflatable harness from the Crew Oxygen Mask (Refer to § 3.B.(1)) Inspect the harness hose manufacturing date Replace the harness hose equipped § (3.B.(2) and § (3.B.(3) or replace the inflatable harness assembly Add the letter ” I” on the bushing of inflatable harness Re-Install the inflatable harness to the Crew Oxygen Mask § (3.B.(4)) Make the test of the Crew Oxygen Mask (Refer to § 3.B.(5)) Disconnect the Crew Oxygen Mask from the A/C oxygen supply source Connect the Crew Oxygen Mask to the A/C oxygen supply source, if desconnected.
No Yes Forward the defective equipment to the appropriate Zodiac Services maintenance facility for replacement.
(Refer to § 3.D) Letter " I " marked on the bushing of inflatable harness of the Crew Oxygen Mask Manufacturing date is between 0850S and 1051S Inspect the letter ”I” on the bushing of inflatable harness (Refer to Figure 2) Yes If applicable: Add the Amdt letter to the identification plate of the Crew Oxygen Mask (Refer to § 3.C) Yes or unknown unstow the Crew Oxygen Mask from its housing Start End If visible : Inspect the harness hose equipped manufacturing date Manufacturing date is between 0850S and 1051S No Action to be performed on Aircraft Action to be performed in the certified PART 145 workshop or maintenance organization approved by civil aviation authority
SERVICE BULLETIN
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 REVISION N°: 2 PAGE: 6/9
(1) Removal of the inflatable harness from the Crew Oxygen Mask Regulator:
(a) Remove the screw from the inflatable harness with magnetic-screwdriver slotted (3x_ _).
(b) Lift the locking tab of the coupling block whic h is in front of the regulator by 1 to 2 mm
(0.04 to 0.08 in).
(c) Hold the locking tab up and move the coupling block apart from the regulator.
(2) Disassembly of the comfort inflat able harness PNR MXH20-1 or MXH21-1.
(a) Disengage the clamp with a screwdriver. Lift up the clamp at different locations.
Discard the clamp.
NOTE : Take care not to damage the block.
(b) Remove the harness hose equipped from the harness block.
(c) If applicable, Remove the nameplate (MXH20-1 or MXH21-1) from the harness block.
Note: Clean the harness block with isopropyl alcohol and lint free cloth.
(3) Assembly of the comfort inflat able Harness MXH21-1 or MXH21-31
(a) Install the O-rings on the ends of the harness hoses.
NOTE : The O-rings are lubricated with compatible oxygen lubricant.
(b) Install the ends of the harn ess hoses in the coupling block.
1 Check the direction of the harness hoses (head strap to the top), 2 Position each end of the hoses in its housing in harness block (30). Make sure that the harness hoses are not twisted, 3 Hold the ends of the harness hoses (50) in place manually.
(c) Pinch the clamp (20) to engage it in the ends of the harness hoses. Press the clamp until it comes fully to its position (you will hear a click).
NOTE : Make sure that the clamp is correctly locked on each end of the harness hoses; its upper face must be flush with the coupling block.
(d) Check that each tube end is correctly locked.
(e) If applicable, Install the nameplate (MXH21-31) to the harness block.
(4) Installation of the inflatable harness to the Crew Oxygen Mask Regulator:
(a) Install the harness on the regulator body and attach it with the screw.
(b) Torque the harness attachment screw 0,20 N.m ± 0,02 (1.77 lb.in ± 0.17).
(5) Test of the Oxygen Crew Mask
(a) Make the test of the time and the comfort function:
(refer to CMM 35-13-63 Subtask 35-13-63-790-005-A01)
SERVICE BULLETIN
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 REVISION N°: 2 PAGE: 7/9
C. Re-identification After modification (1) of inflatable harness PNR MXH20-1 or MXH21-1 by inflatable harness PNR MXH21-31 or harness hose assembly PNR 445186 or 445952 by harness hose assembly PNR 420B156, The Crew Oxygen Mask Regulators MC10 Se ries are identified with the amendment letter : W
(1) With indelible ink, write the relevant amendment letter on the identification label
(1) Post SB MA_B_C_F10-35-260 D. Declaration of Modification The form attached in appendix II is to be filled by the customer and attach to the PO.
Figure 1 – “ I “ Letter Position I
SERVICE BULLETIN
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 REVISION N°: 2 PAGE: 8/9
Figure 2 – Manufacturing Date Explanation E. ZODIAC SERVICES Facilities
EUROPE MIDDLE EAST
ZODIAC SERVICES EUROPE 61, rue Pierre CURIE CS20001 78373 PLAISIR CEDEX / FRANCE Phone : +33 1 61 34 23 23 Fax : +33 1 30 55 71 61
ZODIAC AEROSPACE UK Unit 610 Avenue West Skyline 120 BRAINTREE - CM77 7AA, ENGLAND Phone: 44 (0)-1376-329-194 Fax: 44 (0)-1376-340-734
IN-SERVICES MIDDLE EAST Abu Dhabi International Airport Cargo Village Area P.O. Box No 106675
ABU DHABI - UNITED ARAB
EMIRATES Phone : + 971 2575 7088 Fax : + 971 2575 8482
USA ASIA
ZODIAC SERVICES AMERICAS 4900 St. Joe Boulevard, Building 200, Suite 400 COLLEGE PARK, GA 30337 USA Phone : +1 678 228 8153 Fax : +1 800 879 0411
ZODIAC SERVICES ASIA 36, Loyang Drive SINGAPORE 508949 Phone : +65 6579 2230 Fax : +65 6579 2231
APPENDIX I CMM N° EQUIPMENT PNR DESIGNATION 35-13-63 MC10 Series CREW OXYGEN MASK REGULATOR Manufacturing Date Year Week eg.: 0837 = 37h week of 2008
SERVICE BULLETIN
DATE: 20140625 SERVICE BULLETIN: MC10-35-274 REVISION N°: 2 PAGE: 9/9
APPENDIX II
DECLARATION OF MODIFICATION EQUIPMENT(S) MODIFIED:
Mask Harness PNR SNR PNR Batch number
NAME AND ADDRESS OF AIRLINES or FAR/JAR 145 REPAIR STATION:
Modification Date:
Name, position, signature of the modification responsible: