STC SA00478SE

SA00478SE Athena Aircraft, LLC 2111 Seminole Road Norman, OK 73026 Part * the * Regulations * * * See attached Federal Aviation Administration (FAA) Approved Model List (AML) No. SA00478SE for list of approved airplane models and applicable airworthiness regulations.

Replace existing horizontal stabilizer skins in accordance with Air Metal Fabricator, Inc.

Master Drawing Lists and installation instructions per the attached FAA AML No.

SA00478SE, dated November 6, 1997, or later FAA approved revision.

Approval of this change in type design applies to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

February 24, 1997 August 17, 2018; January 1, 2023 November 6, 1997 For Acting Manager, Seattle ACO Branch

SA00478SE