What it approves
Installation of DART Heli-Access-Steps on the skid landing gear cross tubes.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Un ited S tates of Am erica Department of Transportation - Federal Aviation Administration Supplemental Type Certificate
Number SA00500SE
This certificate, issued to Dart Aerospace USA, Inc.
3845 NE 30th Avenue Hillsboro, OR 97124
Part 27 of the Federal Aviation Regulations.
Original ProductType Certificate Number: H2SW Make: Bell Model: 206A, 206B, 206L, 206L-1, 206L-3, 206L-4, and 407
Description of the Type Design Change: Installation of DART Heli-Access-Steps on the skid landing gear cross tubes. These passenger steps are fabricated in accordance with DART Aerospace Master Drawing List No.
MDL-D206-628, Revision A, dated December 10, 1997, or later Federal Aviation Administration (FAA) approved revision, and installed in accordance with DART Aerospace Installation Instruction No. IIN-D206-628, Revision A, dated November 28, 1997, or later FAA-approved revision. These passenger access steps must be maintained in accordance with DART Aerospace Maintenance Manual Supplement No. MMS -D206-628, Revision A, dated November 27, 1997, or later FAA-approved revision.
Limitations and Conditions: Approval of this change in type design applies to the above listed rotorcraft only.
This approval should not be extended to other rotorcraft of these models on which othe r previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft. A copy of this certificate must be maintained as part of the permanent records of the modified rotorcraft.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: December 11, 1997 Date reissued: October 28, 2015; October 17, 2018 Date of issuance: February 10, 1998 Date amended:
(Signature)
Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 7
| Make | Model | Data sheet |
|---|---|---|
| Bell Helicopter Textron Canada Limited | 206A | H2SW |
| Bell Helicopter Textron Canada Limited | 206B | H2SW |
| Bell Helicopter Textron Canada Limited | 206L | H2SW |
| Bell Helicopter Textron Canada Limited | 206L-1 | H2SW |
| Bell Helicopter Textron Canada Limited | 206L-3 | H2SW |
| Bell Helicopter Textron Canada Limited | 206L-4 | H2SW |
| Bell Helicopter Textron Canada Limited | 407 | H2SW |
Every issue · 3
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| October 17, 2018 | Reissued, current | Certificate |
| October 28, 2015 | Reissued, earlier issue | Certificate |
| February 10, 1998 | Issued, earlier issue | Certificate |