STC SA00562SE

Supplemental type certificate · Cub Crafters Inc

Holder
Cub Crafters Inc · United States
Status
Current · Reissued
Status date
January 26, 2012
Applied
May 26, 1998
Product
Aircraft · Single-Engine
Certification basis
Part 3, Part 21
Data sheet
TCDS1A2

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Install McCauley 82 inch diameter metal propeller model 1A175/GM8241, GM8242, GM8243, or GM8244 in accordance with Cub Crafters, Inc. Master Drawing List, MDL 103120, Revision new, dated May 26, 1998, and its listed data or later Federal Aviation Administration (FAA) approved revision.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SA00562SE

This certificate, issued to Cub Crafters, Inc.

1918 South 16th Avenue Yakima, WA 98903-1212

Part 3 of the Civil Air Regulations.

Original ProductType Certificate Number: 1A2 Make: Piper Model: PA-18 and PA-19 Series

Description of the Type Design Change: Install McCauley 82 inch diameter metal propeller model 1A175/GM8241, GM8242, GM8243, or GM8244 in accordance with Cub Crafters, Inc. Master Drawing List, MDL 103120, Revision new, dated May 26, 1998, and its listed data or later Federal Aviation Administration (FAA) approved revision.

Limitations and Conditions: This propeller installation is limited to the above models of aircraft that have a Lycoming O-320 Series engine of 150 or 160 horse power, equipped with a fixed pitch propeller using 3/8 inch diameter propeller bolts via original type design, or by means of a Supplemental Type Certificate (STC) or FAA Field Approval. For proper propeller to ground clearance the aircraft must be equipped with an approved combination of wheels and tires that provides a minimum clearance between the ground and the center of the axle of 9-3/8 inches, or having extended landing gear per STC SA00411SE installed. Approval of this change in type design applies to the above model aircraft only. This approval should not be extended to other aircraft on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate and FAA-approved Cub Crafters Airplane Flight Manual Supplement No. 103120-AFM, dated August 28, 1998, or later FAA-approved revision, must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: May 26, 1998 Date reissued: January 26, 2012 Date of issuance: August 28, 1998 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 18

MakeModelData sheet
Piper Aircraft Inc.PA-181A2
Piper Aircraft Inc.PA-18-105 (Special)1A2
Piper Aircraft Inc.PA-18-125 (Army L-21A)1A2
See all 18 models

Every issue · 2

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
January 26, 2012Reissued, currentCertificate
August 28, 1998Issued, earlier issueCertificate