STC SA00648SE

Supplemental type certificate · Knots 2U Ltd.

Holder
Knots 2U Ltd. · United States
Status
Current · Reissued
Status date
October 9, 2015
Applied
July 14, 1998
Product
Aircraft · Small Airplane
Certification basis
Part 21

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 5, 2025.

What it approves

Fabrication of R.M.D. Aircraft Lighting, Inc., wing-tip and landing light Kit No. 00190-C.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

Number SA00648SE

This certificate, issued to KNOTS 2U, LTD 709 Airport Road Burlington, WI 53105

Part * of the * Regulations.

Original ProductType Certificate Number: * See attached Approved Model List (AML) Make: No. SA00648SE for a list of approved Model: airplane models and applicable airworthiness regulations.

Description of the Type Design Change: Fabrication of R.M.D Aircraft Lighting, Inc. wing-tip and landing light Kit No. 00190-C in accordance with R.M.D. Master Drawing List No. RMD 00190C-DL, Revision B, dated October 28, 1998, or later Federal Aviation Administration (FAA) approved revision; and installation of this wing-tip and landing light kit in accordance with R.M.D. Installation Instructions No. RMD 00190C, dated June 1, 1998, or later FAA- approved revision.

Limitations and Conditions: Approval of this change in type design applies to aircraft models listed on AML SA00648SE only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate and AML SA00648SE must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this Certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: July 14, 1998 Date reissued: October 9, 2015 Date of issuance: November 30, 1998 Date amended:

(Signature)

Manager, Seattle Aircraft Certification Office (Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 101

MakeModelData sheet
Cessna Aircraft Company1853A24
Cessna Aircraft Company185A3A24
Cessna Aircraft Company185B3A24
See all 101 models

Every issue · 2

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
October 9, 2015Reissued, currentCertificateApproved model list
November 30, 1998Issued, earlier issueCertificate