STC SA01708WI

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the

Signature

Title 2 SA01708WI MN Engineering, LLC 15737 SE 170 Avenue Milton, KS 67106 Civil Air Regulations.3 Installation of a third lap belt restraint in the center of the main cabin rear bench seat.

See attached FAA AML, SA010708WI, for required data.

Compatibility of this design with previously approved modification must be determined by the installer.

for Paul Nguyen Manager, Central Certification Branch Compliance & Airworthiness Division Aircraft Certification Service See attached FAA Approval Model List (AML), SA010708WI, for all makes, models, and certification basis.

November 14, 2023 July 21, 2014 July 9, 2012 December 13, 2012

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

2 SA01708WI