STC SA01764SE

Supplemental type certificate · AeroMech Incorporated

Holder
AeroMech Incorporated · United States
Status
Current · Amended
Status date
June 26, 2007
Applied
April 16, 2007
Product
Aircraft · Single-Engine
Certification basis
Part 21, Part 23
Data sheet
TCDSA59EU

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

ONE-ONLY: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM), S/N 1006

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

United States of America Department of Transportation _ Federal Aviation Administration Supplemental Type Certificate Number SA01764SE

This certificate, issued to: AeroMech Incorporated 1616 Hewitt Avenue, Suite 312 Everett, WA 98201 Part 23 of the Federal Aviation Regulations.

Original Product⎯Type Certificate Number: A59EU (Revision 15) Make: Piaggio Model: P-180, Serial Number 1006

Description of the Type Design Change: Non-Group (Individual) aircraft approval for Reduced Vertical Separation Minimum (RVSM) in accordance with AeroMech Document No. AMI-QD-P180-0705, Revision “New,” dated May 24, 2007 or latest FAA approved revision.

Limitations and Conditions: Instructions for Initial and Continued Airworthiness, Document AMI-IICA-P180- 0705, Revision “New,” dated May 24, 2007, or latest FAA approved revision, is a required part of this STC.

The Airplane Flight Manual Supplement for the Piaggio P-180, Serial Number 1006, AeroMech Document AMI- AFMS-P180-0713, Revision “A,” FAA approved June 26, 2007, or latest FAA approved revision, is required onboard for operation of the aircraft.

This approval should not be extended to other specific airplanes of these models on which previous modifications are incorporated, unless it is determined that the interrelationship between this approval and any of those previously approved modifications will introduce no adverse effects upon the airworthiness of that airplane.

Descriptive data pertaining to this design change are considered inadequate for duplication on other products.

This approval is limited to Piaggio P-180, Serial Number1006 only.

A copy of this certificate must be maintained as part of the permanent records of the aircraft. If the holder agrees to permit another person to use this certificate, the holder shall give the other person written evidence of the permission.

Date of application: April 16, 2007 Date reissued:

Date of issuance: June 21, 2007 Date amended: June 26, 2007

(Signature)

Acting Manager, Seattle Aircraft Certification Office (Title)

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 1

MakeModelData sheet
Piaggio Aero Industries S.p.A.P-180A59EU