STC SA02262SE

United States of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate Number SA02262SE

This certificate, issued to Stene Aviation Inc.

470 Regatta Rd.

P.O. Box 700 Polson, MT 59860

Part * of the * Regulations.

Original ProductType Certificate Number: * See attached Federal Aviation Administration (FAA) Make: Approved Model List (AML) SA02262SE for approved Model: aircraft models and applicable airworthiness regulations

Description of the Type Design Change: Installation of split seam wing strut cuff as replacement parts for the strut fairings in accordance with Stene Aviation Inc. Part Drawing Eligibility Table SA700PDET, Revision IR, dated March 6, 2013, or later FAA approved revision. Fabrication is controlled by Stene Aviation part numbers given in Report SA700STRUT-1 dated April 11, 2012, or later FAA-approved revision. Maintained in accordance with Stene Aviation “Instructions for Continued Airworthiness,” Document Number SA700_ICA, Revision A, or later FAA-accepted revision.

Limitations and Conditions: Approval of this change in type design applies to the aircraft listed on AML SA02262SE only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate, the AML, and ICA must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: March 25, 2012 Date reissued:

Date of issuance: March 8, 2013 Date amended:

(Signature)

Acting Manager, Seattle Aircraft Certification Office (Title)