What it approves
Installation of fuel cell modifications
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to
Part * of the Regulations.
Description of Type Design Change: Installation of fuel cell modifications consistent with Master Document List Engineering Report 23-2810-013, I/R, dated July 22, 2003; or later FAA approved revision.
Limitations and Conditions: This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effects upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
(See continuation 3 of 3)
FFC Manufacturing 4010 Pilot Dr., Suite 103 Memphis, TN 38118 3A13, 5A6 Make: Cessna Model: 180, 182 Date reissued: April 16, 2009
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
( Title)
Date of application: February 10, 2003
Date of issuance: August 4, 2003
FAA FORM 8110-2-1(10-69) PAGE 2 of 3 PAGES
Number SA02632AT-D
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA02632AT-D
Limitations and Conditions – Continued:
FFC Manufacturing part numbers 3000-1, (-2), (-13) will be replacements for Cessna part numbers 0726000-1, (-2), (-13) for the listed model aircrafts.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.