STC SA02765SE

(See Continuation Sheet Page 3 of 3 Pages) SA02765SE Acme Suspensions, LLC 3425 Airport Road Maiden, NC 28650 Part * the * Regulations * * * See attached Federal Aviation Administration (FAA) Approved Model List (AML) SA02765SE for approved aircraft models and applicable airworthiness regulations Installation of Acme Stinger tailwheel landing gear shock absorber in accordance with the Master Drawing List as listed in the Approved Model List (AML) and document AA-200-INST Revision IR or later FAA-accepted revision and maintained in accordance with document AA-210 ICA Revision A or later FAA-approved revision.

This modification should not be installed on aircraft on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate and document AA-210 ICA Instructions for Continued Airworthiness, Revision A or later FAA-approved revision, shall be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

May 4, 2022 October 31, 2024 March 29, 2023 for Acting Manager, Seattle ACO Branch

SA02765SE