STC SA10236SC

FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION Page 1 of ___

Part of .

SA10236SC DAC International 20500 Prairie St.

Chatsworth, CA 91311 * * (see attached FAA Approved Model List (AML) for list of Approved models and applicable aiworthiness regulations) Installation of a GDC 31 Roll Steering Converter in accordance with Master Drawing List No. 1049-000-XX, Rev G., dated August 23, 2006, or later FAA approved revision. FAA approved Airplane Flight Manual 1049-2100-02, Rev. A, dated Octoer 7, 2005, or later FAA approved revisio is required.

The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

12/02/2003 March 02, 2007; July 17, 2020 04/27/2004 June 28, 2004; Rev. 1, October 17, 2005; Rev. 2, March 22, 2011;

Rev. 3 Jim Grigg Manager, Fort Worth ACO Branch, Compliance & Airworthiness Division Aircraft Certification Service 2

FAA Form 8110-2 (06/20) SUPERSEDES PREVIOUS EDITION Page 2 of ___

SA10236SC 2