What it approves
Installation of Hoskins Supplemental Model B High Intensity Wing Tip Lights, Model C Tail Light, with or without Models 1 or 2 High Intensity Fuselage Lights.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 3 of the Civil Air Regulations.
Description of Type Design Change: Installation of Hoskins Supplemental Model B High Intensity Wing Tip Lights, Model C Tail Light, with or without Models 1 or 2 High Intensity Fuselage Lights.
Data required: (1) General Installation Instructions as amended May 1, 1962; (2) Hoskins Drawings No.
21-2, 22-1, 22-1B, 28-2 and SW-1; and (3) Hoskins Specification sheet for Cessna 180, 182, 185, 210, and 210-5 aircraft.
Limitations and Conditions: The approval of this change in type design applied basically to aircraft models listed above only. This approval should not be extended to other specific airplanes of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft.
Placard required: Turn off strobe lights when taxiing in vicinity of other aircraft. Standard position lights to be turned on during all night operations.
BF Goodrich Aerospace Lighting Systems Division 3445 South 5th Street Phoenix, AZ 85040 5A6 Cessna Make :
180, 180A, 180B, 180C, 180D, 180E and 180F Model :
Date reissued : October 17, 1974, April 1, 1990, September 25, 1995, January 31, 1996, September 30, 2011
( Signature) Melvin D. Taylor Manager, Atlanta Aircraft Certification Office
( Title) Date of application : May 1, 1962
Date of issuance : March 15, 1963
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.