What it approves
Installation of a passenger seating system to replace five existing Decrane single seats with Model FS1101 single seats.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 23 of the Federal Aviation Regulations.
Description of Type Design Change: Installation of a passenger seating system to replace five existing Decrane single seats with Model FS1101 single seats. This modification is done in accordance with Master Data List Document Number MD-AN-1802, Rev. IR, dated July 24, 2009, or later FAA approved revision.
Limitations and Conditions: The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder shall give the other person written evidence of that permission. This modification must be maintained in accordance with the Instructions for Continued Airworthiness contained in Document Number AN-1802-ICA-1, Rev.
IR, dated June 19, 2009, or later FAA accepted revision.
Certification Basis: The certification basis for this STC is the same as identified on Type Certificate Data Sheet A59EU Part 23 Amendment 23-1 to 23-33 and FAR Part 25.853 Amendment 25-116.
Piaggio America, Inc.
5050 Warbird Dr.
Denton, TX 76207 A59EU Make: Piaggio Model: P-180 Date of application: April 17, 2009
Date of issuance: September 04, 2009
Date reissued: December 24, 2009
( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
( Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Piaggio Aero Industries S.p.A. | P-180 | A59EU |