STC SA11172SC

FAA Form 8110-2 (8/13) Page 1

Supplemental Type Certificate Project Number ST09770SC-A KSC Number ST11172SC

Part 23 of the Federal Aviation Regulations.

Original Product – Type Certificate Number: [*See attached Make: FAA Approved Model List (AML) Model: For list of approved models and Applicable airworthiness Regulations]

Installation of an ADS600-B Automatic Dependent Surveillance-Broadcast (ADS-B) Universal Access Transceiver (UAT) and Global Positioning System (GPS) antenna in accordance with Master Drawing List 240-0013-00, Revision 9, dated May 21, or later FAA approved revision. Airplane Flight Manual Supplement 240-0018-00, Revision 2, dated May 23, 2014, is required.

A copy of this certificate must be maintained as part of the permanent records for the modified aircraft. (See attached Approved Model List). The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: July 15, 2013 Date reissued:

Date of issuance: May 23, 2014 Date amended:

Signature S. Frances Cox

Title Manager, Special Certification Office, Southwest Region

NavWorx, Inc.

3706 Big A Road Rowlett, TX 75089

SUPPLEMENTAL TYPE CERTIFICATE, FAA FORM 8110-2 (CONTINUED)

To (Name of transferee)

(Address of transferee)

(Number and street)

(City, State, and ZIP Code)

From (Name of grantor)

(Address of grantor)

(Number and street)

(City, State, and ZIP Code)

FAA Form 8110-2 (8/13) Page 2

FAA Form 8110-2 (8/13) Page 3

Number: ST11172SC Date of Issuance: December 16, 2013

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and FAA policy for significant changes in FAA Order 8110.48, the certification basis for the Approved Model List is as follows:

a. The type certification basis is shown on Approved Model List for parts not changed or not affected by the change.

b. The certification basis for parts changed or affected by the change since the reference date of applications, July 15, 2013, is based upon part 23 as amended by Amendment 23-62.

Based on 14 CFR § 21.115 and 21.101, and the FAA policy for significant changes in FAA Order 8110.48, the certification basis for this modification was determined to be:

Regulations at the latest amendment 23-0 through 23-62

23.29; 23.301(a)(b); 23.303; 23.305; 23.307(a); 23.561(b)(3)(e); 23.603; 23.605; 23.607(a)(b), 23.609; 23.627;

23.777(a)(b); 23.1351; 23.1365(a), (b), (d), (e); 23.1501; 23.1519; 23.1529; 23.1581 (a), (b)(1)(3), (f)

Regulations at an intermediate amendment Regulations at amendment 23-20:

23.1301

Regulations at amendment 23-33:

23.777

Regulations at amendment 23-43:

23.1322; 23.1357(a), (b), (c)

Regulations at amendment 23-49:

23.1431(a), (b),

-END-