What it approves
Installation of Teflon bushings with stainless steel inserts in elevator and rudder hinges
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number SA1190NW This certificate issued to: Bruce L. Tulloch Certifies that the change in the type design for the following preduct with the limitations and conditins thorefor as specified heronmeets thesinverthiness requirements sPurt 3 of the CiVil Air Regulations:, May 15, 1956, as amended by 3-3.
Original Product - Type Certificate Number: 5A6 Make: Cessna Model: 180H steel inserts in elevator and rudder hinges in accordance with Bruce L. Tulloch Description of Type Design Change: Installation of Teflon bushings with stainless photographs 1 through 3.
Limitations and Conditions: Data pertaining to this modification are considered inadequate for duplication in other aircraft. This approval is limited to the installation in Cessna 180H, Serial Number 18051815 only. A copy of this Certificate shall be maintained as part of the permanent records for the modified aircraft.
Date of Application: February 13, 1981 Dute vissued:
Date of Issuance: February 27, 1981 Date Amended:
FEDERAL AYIATION By Direction of the Administrator paveler TMINISTRAIO Acting Chief, Seattle Area Aircraft Certification Office (Title)
FAA FoRm 8110-2/10-681
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Cessna Aircraft Company | 180H | 5A6 |