What it approves
Installation of tail stabilizer support.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of
Part of the
Signature
Title Textron Aviation Inc.
One Cessna Boulevard Wichita, KS 67215 2 SA2286NM Civil Air Regulations effective November 13, 1945.
3 Installation of tail stabilizer support in accordance with B&N Industries Report No. 1 dated April 28, 1984. Parts manufactured in accordance with FAA sealed B&N Industries Drawings 1000 "NC" dated March 28, 1984 and 1001 "NC" dated January 25, 1984, or later FAA approved revisions.
Beech C35, D35, E35, F35, G35 The approval of this change in type design applies to the basic aircraft of the specified models that are otherwise unmodified. This approval should not be extended to other specific aircraft of these models on which other previously approved modifications are incorporated, unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
May 15, 1987; April 15, 1996; March 26, 2007;
December 13, 2016 January 12, 1984 June 5, 1984 A-777 Mark Fuller STC ODA administrator ODA-100129-CE
FAA Form 8110-2 (5/14) Page 2 of
To (Name and address of transferee)
From (Name and address of grantor)
ADs that name this STC · 3
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 5
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| December 13, 2016 | Reissued, current | Certificate |
| March 26, 2007 | Reissued, earlier issue | Certificate |