STC SA2359NM

Number SA2359NM Reissued on March 21, 2013, to supersede the original certificate which has been lost or misplaced

This certificate, issued to Mr. Thomas Anderson 295 East Perimeter Road Renton, WA 98057

Part 23 of the Federal Aviation Regulations.

Original ProductType Certificate Number: * See attached Federal Aviation Administration (FAA) Make: Approved Model List (AML) SA2359NM for approved Model: aircraft models and applicable airworthiness regulations

Description of the Type Design Change: Installation of tail wheel assembly in accordance with the applicable FAA-approved Master Drawing List as specified on AML SA2359NM.

Limitations and Conditions: Approval of this change in type design applies to the model aircraft as listed on AML SA2359NM only. This approval should not be extended to other aircraft on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate and AML must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: November 9, 1983 Date reissued: 2/20/15 Date of issuance: May 4, 1984 Date amended: 1/17/95; 3/26/96; 5/23/96; 10/21/98;

3/21/13

(Signature)

Manager, Seattle Aircraft Certification Office (Title)