What it approves
Main landing gear door.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to: Staggerwing Museum Foundation, Inc.
560 Old Shelbyville Hwy Tullahoma, TN 37388
Part * of the Civil Air Regulations. * CAR 4a for AT-11 and C18S; CAR 03 effective 11/13/45 for all other Models specified below.
Original Product - Type Certificate Number : 757 2-582 765 Make : Beech Beech Beech Model : C18S AT-11 D18S, C-45G/H, and TC-45G/H
Installation of main landing gear doors in accordance with data listed on Airline Training, Inc. Drawing List No.
101 dated 10/04/61, revised 12/11/61.
NOTE: (1) Revision dated 03/29/56 to Airline Training, Inc. FAA approved Beech D18S Airplane Flight Manual Supplement dated 10/21/55 or Airline Training, Inc. FAA approved Beech D18S Airplane Flight Manual Supplement dated 09/11/58 required with this modification installed on Beech D18S.
(2) Pertinent portion of Airline Training, Inc. FAA approved Beech C-45G, C-45H, TC-45G and TC- 45H Airplane Flight Manual Supplement dated 08/20/58 required with this modification installed on Beech C-45G, C-45H, TC-45G or TC-45H.
(3) Maximum landing gear extended speed 160 MPH TIAS.
Airworthiness compatibility of this STC with all other major changes to the standard original model(s) shown above should be confirmed prior to installation of this STC. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date reissued : May 22, 1967; August 15, 1968;
February 26, 1990; October 6, 2006 Date amended : July 8, 1960; August 25, 1961
Original signed by Robert D. Adamson
( Signature) Robert D. Adamson Program Manager Wichita Aircraft Certification Office (Title) Date of application : March 27, 1956 Date of issuance : April 6, 1956
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.