STC SA4-662

This certificate issued to: Airborne Scientific Inc.

5000 West 120 th Place Overland Park, KS 67209

Part 3 of the Civil Air Regulations.

Original Product - Type Certificate Number : * See model eligibility on Page 3 Make : * Model : *

Installation of camera pod on Cessna series 170, 172, 180 and 182 in accordance with Clifton G. McBride Project #1-CGM Drawings No. 1, 2, 3, and 4 dated 04/20/58 and Drawing E.O. No. 1 & 2; or later FAA approved revisions.

This approval should not be extended to other specific airplanes of these models on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications will not introduce any adverse effect upon the airworthiness of that airplane. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date reissued : February 5, 2007; June 25, 2007

Date amended : February 7, 2008

Original signed by Todd G. Dixon

( Signature) Todd G. Dixon Associate ACO Manager, Electrical Systems & Avionics Wichita Aircraft Certification Office (Title) Date of application : September 8, 1958 Date of issuance : November 26, 1958

FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES

Number SA4-662

Date of Issuance: November 26, 1958 Date Reissued: February 5, 2007 Date Reissued: June 25, 2007 Date Amended: February 7, 2008

Model Eligibility (continued):

Model Eligibility TCDS Number Cessna 170 799 Cessna 172 3A12 Cessna 180 5A6 Cessna 182 3A13

--END--