What it approves
Miscellaneous improvements to mission equipment and airplane configuration. (747-E4B)
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA5005SW-D This Certificate issued to L-3 Communications Integrated Systems, L.P. Boeing Aerospace Co.
10001 Jack Finney Blvd. and P. O. Box 3999 Greenville, TX 75402 Seattle, WA 98124 Part 25 of the Federal Aviation Regulations.
Original Product Type Certificate Number: A20WE *SEE PAGE 3 Make : Boeing Model : 747-E4B Description of Type Design Change: Miscellaneous improvements to mission equipment and airplane configuration in accordance with E-Systems Sealed Drawing List, E4B Command Post 1C-1 Phase, SDL 7148-1 (7057, 7060) Rev. D dated 30 November 1984 or later FAA approved data.
Date of application: September 29, 1982 Date reissued : April 30, 2004 Date of issuance : July 19, 1983 Date amended : 5/18/84; 8/27/84; 1/15/85 Rev 3;
3/22/2013 Amdt 4 By direction of the Administrator
(Signature) Michael E. Hopper ODA-750173-SW Administrator, Alternate
(Title)
Transfer the ownership of Supplemental Type Certificate Number
to (Name of transferee) (Address of transferee) (Number and street)
(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)
(City, State and Zip code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
FAA Form 8110-2-1(10-69) Page 3 of 3
Number SA5005SW-D Amendment 4 Date of Issuance: March 22, 2013
Limitations and Conditions: (Continued)
1. Aircraft does not comply with FAR Part 25 in several areas due to mission requirements. Deviations are noted in the above Sealed Drawing List.
2. Supplemental Type Certificate SA2703SW and effective portions of Type Certificate approved Boeing MR’s 74735-1, 74735-2, 74735-3, 74735-4, 74735-5, 74735-6, 74735-9, 74735-10, 74735-12, 74735-14, 74735-15, 74735-17, 74735-18, 74735-20, 74735-22 and/or the Service Bulletins associated with these MR’s must be installed prior to or in conjunction with this STC.
3. Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
4. When installed, airplanes with this STC are limited to operations excluding those of an Air Carrier.
Specifically, no operations under 14 CFR 121, 14 CFR 129 or any foreign Air Carrier are permitted.
--------------------------------------------------END----------------------------------------------
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 747-200B Series | A20WE |