STC SA5263NM

This certificate issued to: Otto E. Bartoe Jr.

57980 CR 62 Clark, CO 80428

Part 3 of the Civil Air Regulations.

Original Product - Type Certificate Number : 5A6 3A13 Make : Cessna Cessna Model : 180, All Models 182, 182A, 182B, 182C, 182D

Installation of the Skyote Gap Flap System in accordance with Skyote Aeromarine Top Drawing No. 9100, Rev. D, dated August 31, 1992, and Installation Instructions Report No. 001, Rev. N/C, dated August 31, 1992, or later FAA approved revisions.

1. FAA Approved Skyote Aeromarine Airplane Flight Manual Supplement No. FMS-01, dated September 1, 1992, or later FAA Approved revision is a required part of this STC.

2. This approval should not be exte nded to aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft.

Date of application : August 12, 1991 Date of issuance : September 1, 1992 Date reissued : October 26, 2011

Date amended : April 4, 1994, August 3, 1994

( Signature) Todd Dixon Manager, Denver Aircraft Certification Office (Title)

FAA FORM 8110-2-1(10-69) PAGE 2 of 2 PAGES