What it approves
Installationo f a Geometrics G803-905 tail stinger
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA722NW This certificate issued to: AAR OKlahoma, INC.
Punt 23 of the Federal Aviation Regulations:
Original Product -Type bertificate Lumber: A25 CE Make: Cessna Model: 404 Description of Type Design Change: Installation of a Geometrics G803-905 tail stinger in accordance with Western Skyways photographs 1 through 3.
Limitations and Conditions: Data pertaining to this modification are considered inadequate for duplication in other aircraft. This approval is limited to the installation in Cessna model 404 aircraft, Serial Number 404-0115 only. A copy of this Certificate, Addendum No. SA722NW, and FAA Approved Flight Manual Supplement shall be maintained as part of the permanent records for the modified aircraft.
Date of Application: January 16, 1979 Date Reissued: July 22, 1988 Date of Issuance: February 23, 1979 Date Amended:
FEDERAL AVIATION By Direction of the Administrator (Signature ) TEMINISTRATOE Manager, Seattle Aircraft Modification Branch (Tille)
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA722NW Supplemental Type Certificate ADDENDUM NO. SA722NW The conditions and limitations of Type Certificate Data Sheet No. A25CE apply except where superseded by the following:
Supplemental Type Certificate Addendun, which is part of STC SA722NW, prescribes the conditions and limitations under which the product for which the STC was issued meets the airworthiness requirements of the Federal Aviation Regulations. A copy of this STC Addendum is required to be maintained as part of the permanent records for the modified aircraft.
Supplemental Type Certificate HOLDER: AAR Oklahoma, Inc.
CESSNA MODEL 404 (RESTRICTED CATEGORY) AS MODIFIED BY STC SA722NW All items of Data Sheet A25CE apply except:
Vmc - 82 knots (with boom installed at 8400 1bs. and a C.G. of 172.65) PLACARD:
RESTRICTED CATEGORY OPERATION,
BOOM INSTALLED
AVOID TAKEOFFS AND LANDINGS
WITH TAIL LOW NOTE: Restricted Category approval for the Special Purposes of Aerial survey (photography, mapping, oil and mineral exploration).
- END -
FAA FORM 8110-2-1 (10-69) PAGE 3 OF 3 PAGES
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Cessna Aircraft Company | 404 | A25CE |