What it approves
Installation of wing spar strap Kit No. K7312.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to: Staggerwing Museum Foundation, Inc.
560 Old Shelbyville Hwy Tullahoma, TN 37388
Part 3* of the Civil Air Regulations. * effective 11/01/49 as amended through 3-14.
Original Product - Type Certificate Number : A684, A757, A7865 Make : Beech Model : 18 Series (includes all models except seaplane and tricycle gear configurations)
Install Airline Training, Inc. Kit No. K7312 Spar Strap System (reference Drawing List No. 7312, dated 08/09/74, or later FAA approved revision) in accordance with Installation Instructions, Document 7312, dated 08/29/74, or later FAA approved revision.
The approval of this change in type design applies basically to Beech 18 series airplanes only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon airworthiness of that aircraft. This determination should include consideration of significant changes in weight distribution such as an increase in the fixed disposable weight in the fuselage. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date reissued : February 26, 1990; October 6, 2006
Date amended : February 13, 1975
Original signed by Robert D. Adamson
( Signature) Robert D. Adamson Program Manager Wichita Aircraft Certification Office (Title) Date of application : May 22, 1974 Date of issuance : December 12, 1974
ADs that name this STC · 1
An AD can apply because an STC is installed, or mention one in its text.