STC SA909CE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the

Signature

Title 2 SA909CE Curry Aviation, LLC 616 N. Palmetto Street Leesburg, FL 34748 Civil Air Regulations.3 Installation of STOL Kit (wing leading edge cuffs, drooped tips, stall fences and aileron gap seals). Data required:

1. FAA Approved STOL-Craft Drawing List No. 1, dated May 7, 1973, or later FAA approved revision.

1. Compatibility of this design with previously approved modification must be determined by the installer.

2. Seaplanes must be equipped with EDO 88A-1650 floats.

3. Delete all references to intentional spins from the utility category placard, and adjacent to it add a new placard which reads: "INTENTIONAL SPINS PROHIBITED."

for Paul Nguyen Manager, Central Certification Branch Compliance & Airworthiness Division Aircraft Certification Service Textron Aviation (Cessna) 150, A, B, C, D, E, F, G, H, J, K, L, M;

152, A152 5/26/1977, 12/16/2022 1/28/1974, 4/7/1982, 6/29/1982, 4/28/1983, 4/23/1984 April 27, 1973 May 7, 1973 3A19

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

2 SA909CE