STC SG03715NY

Supplemental type certificate · Lanitz-Prena Folien Factory GmbH

Holder
Lanitz-Prena Folien Factory GmbH · Germany
Status
Current · Amended
Status date
February 10, 2022
Applied
March 18, 2016
Product
Aircraft · Glider
Certification basis
Part 21

From FAA DRS, with our copy of the certificate PDF. DRS record last changed April 27, 2026.

What it approves

Iunstallation and maintenance of Oratex 6000 Covering and Coating System

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA Form 8110-2 (03/21) Page 1 of ___ IMPORT SG03715NY Lanitz-Prena Folien Factory GmbH Am Ritterschloesschen 20 Leipzig, Germany 04179 Part * Title 14 Code of Civil Air/Federal Aviation Regulations * * *See attached FAA Approved Model List (AML) No. SG03715NY for a list of approved models and applicable airworthiness regulations.

Installation and maintenance of Oratex 6000 Covering and Coating System must be in accordance with FAA Approved Model List (AML) No. SG03715NY, issued February 10, 2022, or later FAA approved revisions.

March 18, 2016 June 22, 2016 February 10, 2022 Anthony E. Gallo Manager, International Validation Branch Compliance & Airworthiness Division Aircraft Certification Service 3

1. A copy of this certificate and FAA AML No. SG03715NY, issued February 10, 2022, or later FAA approved revisions, must be maintained as part of the permanent records for the modified aircraft.

(See Limitations and Conditions Continued on Page 3 of 3)

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use the certificate to alter the product, the holder shall give the other person written evidence of that permission.

4. This STC is applicable to all serial numbers for the Make-Model as listed in FAA AML No. SG03715NY.

5. Maintenance must be in accordance with the "Airworthiness Limitations" section of Lanitz-Prena Folien Factory GmbH Maintenance Manual Supplement as listed in FAA AML No. SG03715NY.

Certification Basis:

Based on 14 CFR §§ 21.115 and 21.101, and the FAA policy for design changes that are identified as not significant in FAA Order 8110.48A, the certification basis for the Make/Model aircraft as listed in FAA AML No. SG03715NY is as follows:

a. The type certification basis for Make/Model aircraft, as listed in FAA AML No.

SG03715NY, is shown on TCDS, as listed in FAA AML for parts not changed or not affected by the change.

b. The type certification basis for Make/Model aircraft, as listed in FAA AML No.

SG03715NY, is shown on TCDS, as listed in FAA AML, for parts changed or affected by the change plus the following 14 CFR exceptions:

Compliance with 14 CFR Part 21.17(b) has been shown in accordance with CS-22 Amendment 2 for the following CS regulations: 22.1, 22.21, 22.29, 22.45, 22.63,

22.143, 22.152, 22.201, 22.203, 22.207, 22.251, 22.301, 22.303, 22.305, 22.307,

22.601, 22.603, 22.605, 22.609, 22.613, 22.629, 22.1529, 22.1581.

-----------END---------- 3 3

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 35

MakeModelData sheet
Alexander Schleicher GmbH & Co.AS-K 13G15EU
Alexander Schleicher GmbH & Co.K 87G4
Alexander Schleicher GmbH & Co.K 8 B7G4
See all 35 models

Every issue · 1

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
February 10, 2022Amended, currentCertificateApproved model list