What it approves
Installation of Rappell System.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of 2
Number: SH3886SW
Part 29 of the Federal Aviation Regulations.
Original Product – Type Certificate Number: H4SW Make: Bell Model: 212, 412, 412EP Description of Type Design Change:
Installation of Rappell System in accordance with Helidyne Drawing HD-412-00-0005, Rev. H dated 2/9/95. Assembly and detail part on HD-412-62-3001 Rev. G dated 9/19/88, or later FAA approved revisions.
Heli-Dyne Rappel System with left/right egress capabilities shall not be installed in conjunction with Heli-Dyne fixed steps.
Rotorcraft Flight Manual Supplement, HDD-87-34, IR, dated December 16, 1987, or later FAA approved revision is required. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Date of Application: November 27, 1987 Date Reissued: March 28, 1990; September 30, 2016 Date of Issuance: December 16, 1987 Date Amended: 1/13/88; 8/1/88; 2/3/89; 2/13/95 Rev. 4
Signature
Title Matt Crouch Acting Manager, Fort Worth Aircraft Certification Office, Southwest Region RSG Products Inc.
3900 Falcon Way West Hangar 165 Fort Worth, TX 76106
FAA Form 8110-2 (5/14) Page 2 of 2
Transfer the ownership of Supplemental Type Certificate Number: SH3886SW
To (Name and address of transferee)
From (Name and address of grantor)
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: ST10962SC
FAA Form 8110-2 (5/14) Page 3 of 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.