What it approves
Installation of Geo-Physical Survey System
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
IMPORT SR00071IB Phoenix Aero Aviation Engineering Ltd.
1325 Eglinton Avenue East; Suite 216 (2nd Floor) Mississauga, Ontario Canada L4W 4L9 Part 27 Title 14 Code of Federal Regulations H9EU Airbus Helicopters AS350B2, AS350B3, AS350BA
1. Installation of Geo-Physical Survey System must be done in accordance with Phoenix Aero Aviation Engineering Ltd. Master Drawing List MDL-PA-20-020, Revision Orig., Transport Canada Civil Aviation (TCCA) approved June 25, 2021, or later TCCA approved revision.
2. Operation must be done in accordance with Phoenix Aero Aviation Engineering Ltd. Flight Manual Supplement FMS-PA-20-020, Revision Orig., TCCA approved June 25, 2021, or later TCCA approved revision.
(Description of Type Design Change Continued on Page 3 of 3)
1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
(Limitations and Conditions Continued on Page 3 of 3) September 28, 2022 October 18, 2022
Anthony E. Gallo Manager, International Validation Branch (AIR-730) Compliance & Airworthiness Division Aircraft Certification Service (AIR) 3
IMPORT SR00071IB SR00071IB 3
IMPORT SR00071IB Date of Issuance: October 18, 2022
Description of Type Design Change (continued):
3. Maintenance must be done in accordance with Phoenix Aero Aviation Engineering Ltd. Instructions For Continued Airworthiness ICA-PA-20-020, Revision Original, dated June 23, 2021, or later TCCA accepted revision.
2. The installer must determine whether this design change is compatible with previously approved modifications.
3. This STC is applicable to all serial numbers for the Make and Models.
Certification Basis:
Based on 14 CFR §21.115 and §21.101, and the FAA policy for design changes that are identified as not significant in FAA Order 8110.48, the certification basis for the Airbus Helicopters AS350B2, AS350B3, and AS350BA aircraft is as follows:
a. The type certification basis for the Airbus Helicopters AS350B2, AS350B3, and AS350BA for parts not changed or not affected by the change is shown on TCDS H9EU.
b. The type certification basis for the Airbus Helicopters AS350B2, AS350B3, and AS350BA for parts changed or affected by the change is shown on TCDS H9EU, including compliance with later amendment requirements for aircraft incorporating OP-3369 and OP-4605 modifications.
----------END---------- 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.