What it approves
Fabrication, installation and maintenance of this Left or Right Hand Pilot in Command modification
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation_Federal Aviation Administration Supplemental Type Certificate Number SR01226SE
This certificate, issued to Hillsboro Aviation, Inc.
3845 NE 30th Avenue Hillsboro, OR 97124
Part 7 of the Civil Air Regulations.
Original ProductType Certificate Number: H1SW Make: Bell Model: 205A, 205A-1, 205B
Description of the Type Design Change: Fabrication, installation, and maintenance of this Left or Right Hand Pilot in Command modification in accordance with Heli-Trade Corporation’s Manual Number HT-STC-011, “Installation and Maintenance Instructions for Pilot In Command to be Either Left or Right Seat,” Original Issue, dated June 11, 2003, or later Federal Aviation Administration (FAA) approved revision and Process Control Document 01-0414, Revision A, dated June 3, 2003 or later FAA-approved revision.
Limitations and Conditions: Approval of this change in type design applies only to Bell model rotorcraft listed above. This approval should not be extended to other rotorcraft of this model on which other previously approved modification are incorporated unless it is determined that the relationship between this change and any other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that rotorcraft.
Modified rotorcraft must be operated in accordance with an FAA-approved copy of the Heli-Trade Corporation’s Rotorcraft Flight Manual Supplement (RFMS) for Pilot In Command to Be Either Left or Right Seat, Original Revision, dated June 11, 2003, or later FAA-approved revision. A copy of this certificate, FAA-approved RFMS, and Document HT-STC-011 must be maintained as part of the permanent record of the modified helicopter.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: April 14, 2000 Date reissued: December 5, 2013; June 7, 2016 Date of issuance: June 16, 2003 Date amended:
(Signature)
Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 3
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| June 7, 2016 | Reissued, current | Certificate |
| June 16, 2003 | Issued, earlier issue | Certificate |