STC SR02304AT

Number SR02304AT This certificate issued to

Part 27 of the Federal Aviation Regulations.

Cabin Floor Protectors manufactured in accordance with Master Drawing List data contained in AAI Report Number AA-98140 Revision A, dated August 22, 2001, or later approved FAA revision.

Bell Helicopter Textron, Inc.

441 Industrial Park Road Piney Flats, TN 37686 R00001RC Make : Bell Helicopter Textron Canada Model : 427 Date of application : August 26, 1998

Date of issuance : November 19, 2001

Date reissued : April 15, 2011

Date amended : August 21, 2002

( Signature) James A. Richmond, Acting Manager Rotorcraft Certification Office, Southwest Region

( Title)

FAA Form 8110-2-1(10-69) Page 2 of 3

FAA Form 8110-2-1(10-69) Page 3 of 3

Number SR02304AT Date of Issuance: November 19, 2001 Date Amended: August 21, 2002 Date of Reissuance: April 15, 2011

Install protectors in accordance with Installation Instructions contained in AAI Report Number AA-98106 Revision A, dated August 10, 2001, and Report Number AA-98107, Revision A, dated May 2, 2000, or later approved FAA revision.

At each Yearly Inspection:

1) Verify front crew protectors are restrained by the foot pedal adjustment control knob and carpet at both rear velcro strips.

2) Check for the protectors being within 4 inches of any part of the foot pedal while the pedals are fully depressed.

Remove or replace if:

a) restraint is not provided as described

b) noticeable damage is found at any of the three restraint zones described

c) any part of the protector is found within the 4 inch foot pedal limit

The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.