What it approves
Installation of LIDAR Anchoring System
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of
Part of the
Signature
Title SR03866NY Alevia Aeronautique Inc.
218 Jean-Talon St-Jean-sur-Richelieu Quebec, J2W 1J2 , Canada Federal Aviation Regulations.
1. Installation of LIDAR Anchoring System for Robinson R44/R44 II equipped with Simplex Aerospace Helipod II Top Load Side Pod in accordance with Alevia Aeronautique Inc. Master Document List P2016004-03, Rev -, dated October 5, 2016 or later Transport Canada Civil Aviation (TCCA) approved revision.
2. Maintenance must be in accordance with Alevia Aeronautique Inc. Installation and Operating Manual No. P2016004-70, Revision -, dated September 27, 2016 or later TCCA accepted revision.
1. FAA STC SR01819SE (Simplex Manufacturing Co. fabrication of Helipod II Top Loader) is a pre-requisite to this approved installation.
2. For specific limitations associated with this installation, refer to Section 3.300 of Alevia Aeronautique Inc. Installation and Operating Manual No. P2016004-70, Revision -, dated September 27, 2016 or later TCCA approved revision.
3. The installer must determine whether this design change is compatible with previously approved modifications.
4. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Gaetano Sciortino Manager New York Aircraft Certification Office Robinson Helicopter Co.
R44 R44 II October 11, 2016 February 13, 2017 IMPORT H11NM 2
FAA Form 8110-2 (5/14) Page 2 of
To (Name and address of transferee)
From (Name and address of grantor)
2 SR03866NY
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.