What it approves
Activation of Ka-band in-flight connectivity system and in-cabin distribution system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:
Part of the Original Product – Type Certificate Number: Make:
By Direction of the Administrator Signature Title IMPORT ST04494NY
Lufthansa Technik AG Weg Beim Jaeger 193 22335 Hamburg, Germany 25 Federal Aviation Regulations.
A16WE 737-700 Series, 737-800 Series
1. Activation of Ka-band in-flight connectivity system and in-cabin distribution system must be in accordance with Lufthansa Technik Supplemental Type Definition Document No. STDD23-17/02M, Issue 1, Revision 0, dated January 22, 2018, or later European Union Aviation Safety Agency (EASA) approved revision.
2. Maintenance of this modification must be in accordance with Lufthansa Technik Instructions for Continued Airworthiness Document No. A-00-16/95-ICA, Issue 04, Revision 00, dated December 7, 2017, or later EASA accepted revision.
3. Operation must be in accordance with Lufthansa Technik Airplane Flight Manual Supplement Doc. No. A-00-16/95-AFM Issue 01, Revision 00, dated June 6, 2017, or later EASA approved revision.
1. Operation must be in accordance with the "Certificate Limitations" section of Lufthansa Technik Airplane Flight Manual Supplement Doc. No. A-00-16/95-AFM Issue 01, Revision 00, dated June 6, 2017, or later EASA approved revision.
2. Only for activation of provisions certified by FAA STC ST04405NY.
3. Installation on aircraft models only that satisfy the configurations and criteria defined in Description of Change AVE01-23 Revision 5, dated January 17, 2018, or later EASA approved revisions.
(See Limitations and Conditions Continued on Page 3 of 3)
BOEING May 12, 2020 May 27, 2020 Anthony E. Gallo Acting Manager New York ACO Branch 3
FAA Form 8110-2 (5/14) Page 2 of
To (Name and address of transferee)
From (Name and address of grantor)
3 ST04494NY
FAA Form 8110-2 (5/14) Page 3 of Date of Issuance: May 27, 2020
4. The installer must determine whether this design change is compatible with previously approved modifications.
5. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
----------END---------- 3 ST04494NY
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.